Invalid Field in CDB

[AlaaL]

Hi everyone

This is the first time i use Imgburn and i don't know anything about it

I am trying to burn an image to a 9 GB DVD and after it starts a message appear say "Cannot set the layer break point when burning DVD-R DL media. Do you want to continue?" and when i press yes the error in the picture appear and stop writing operation

 

Help me please

 

and this is the log file :

 

I 21:02:37 ImgBurn Version 2.5.6.0 started!

I 21:02:37 Microsoft Windows 7 Ultimate Edition (6.1, Build 7600)

I 21:02:37 Total Physical Memory: 3,669,268 KB - Available: 2,022,288 KB

I 21:02:37 Initialising SPTI...

I 21:02:37 Searching for SCSI / ATAPI devices...

I 21:02:40 -> Drive 1 - Info: TSSTcorp CDDVDW TS-L633A TO01 (F:) (ATA)

I 21:02:40 Found 1 DVD±RW/RAM!

W 21:03:03 User accepted disc space warning and is attempting to truncate!

I 21:03:03 Operation Started!

I 21:03:03 Source File: E:\new folder(2)\Syndicate XBOX360-COMPLEX\complex-syndc.dvd

I 21:03:03 Source File Sectors: 4,267,015 (MODE1/2048)

I 21:03:03 Source File Size: 8,738,846,720 bytes

I 21:03:03 Source File Volume Identifier: DVD_ROM

I 21:03:03 Source File Volume Set Identifier: f4978000MS UDFBridge

I 21:03:03 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 21:03:03 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 21:03:03 Source File File System(s): ISO9660, UDF (1.50)

I 21:03:03 Destination Device: [0:1:0] TSSTcorp CDDVDW TS-L633A TO01 (F:) (ATA)

I 21:03:03 Destination Media Type: DVD-R DL (Disc ID: PRINCORDL32)

I 21:03:03 Destination Media Supported Write Speeds: 3x

I 21:03:03 Destination Media Sectors: 4,171,712

I 21:03:03 Write Mode: DVD

I 21:03:03 Write Type: DAO

I 21:03:03 Write Speed: MAX

I 21:03:03 Link Size: Auto

I 21:03:03 Lock Volume: Yes

I 21:03:03 Test Mode: No

I 21:03:03 OPC: No

I 21:03:03 BURN-Proof: Enabled

I 21:03:03 Write Speed Successfully Set! - Effective: 4,155 KB/s (3x)

W 21:03:03 Optimal layer break position exceeds L0 capacity.

W 21:03:03 Optimal L0 Sectors: 2,133,520

W 21:03:03 Maximum L0 Sectors: 2,092,896

I 21:03:03 Optimal L0 Data Zone Capacity: 2,133,520

I 21:03:03 Optimal L0 Data Zone Method: Copied From Original Disc

W 21:03:07 Cannot set the layer break position when burning DVD-R DL media.

E 21:03:11 Failed to Reserve Track! - Reason: Invalid Field in CDB

E 21:03:13 Operation Failed! - Duration: 00:00:09

I 21:03:13 Average Write Rate: N/A - Maximum Write Rate: N/A

[Cynthia]

I 21:03:03 Destination Media Type: DVD-R DL (Disc ID: PRINCORDL32)

Not an expert on Xbox stuff, but DVD +R DL media might work better for this over burning stuff.

[AlaaL]

Ok thanks Cynthia i will try it tomorrow

[AlaaL]

Thanks Cynthia i tried DVD +R DL and it works