JDuBz Posted March 23, 2012 Posted March 23, 2012 Hey guys, I am getting the I/O error. I am using verbatim 2.4x discs, I have a iHAS124B drive with CFW. Here is my log... I 14:38:03 ImgBurn Version 2.5.6.0 started! I 14:38:03 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2) I 14:38:03 Total Physical Memory: 457,200 KB - Available: 78,064 KB W 14:38:03 Drive D:\ (FAT32) does not support single files > 4 GB in size. W 14:38:03 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 14:38:03 Initialising SPTI... I 14:38:03 Searching for SCSI / ATAPI devices... I 14:38:03 -> Drive 1 - Info: HL-DT-ST DVDRRW GSA-H20L S742-06 (E:) (ATA) I 14:38:03 -> Drive 2 - Info: ATAPI iHAS124 B AL0S (G:) (SCSI) I 14:38:03 -> Drive 3 - Info: HEJIRM J4LINODE 1.03 (F:) (SCSI) I 14:38:03 Found 2 DVD±RW/RAMs and 1 BD-ROM/HD DVD-ROM! I 14:38:55 Operation Started! I 14:38:55 Source File: C:\Documents and Settings\Compaq_Administrator\My Documents\Downloads\Dark.Souls.XGD3.NTSC-XPG {BOOBSMAN}\Dark.Souls.XGD3-XPG.dvd I 14:38:55 Source File Sectors: 4,267,015 (MODE1/2048) I 14:38:55 Source File Size: 8,738,846,720 bytes I 14:38:55 Source File Volume Identifier: DVD_ROM I 14:38:55 Source File Volume Set Identifier: c4480000MS UDFBridge I 14:38:55 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 14:38:55 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 14:38:55 Source File File System(s): ISO9660, UDF (1.50) I 14:38:55 Destination Device: [6:0:0] ATAPI iHAS124 B AL0S (G:) (SCSI) I 14:38:55 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) I 14:38:55 Destination Media Supported Write Speeds: 2.4x I 14:38:55 Destination Media Sectors: 4,267,040 I 14:38:55 Write Mode: DVD I 14:38:55 Write Type: DAO I 14:38:55 Write Speed: 2.4x I 14:38:55 Link Size: Auto I 14:38:55 Lock Volume: Yes I 14:38:55 Test Mode: No I 14:38:55 OPC: No I 14:38:55 BURN-Proof: Enabled I 14:38:55 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x) I 14:38:55 Book Type Setting: DVD-ROM I 14:38:55 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes I 14:38:55 Optimal L0 Data Zone Capacity: 2,133,520 I 14:38:55 Optimal L0 Data Zone Method: Copied From Original Disc I 14:38:55 Set L0 Data Zone Capacity Succeeded! I 14:38:55 Filling Buffer... (71 MB) I 14:39:08 Writing LeadIn... I 14:39:50 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 14:39:50 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 14:39:50 Writing Layer 0... (LBA: 0 - 2133519) W 14:44:27 Waiting for buffers to recover... (LBA: 446080) W 14:44:49 Waiting for hard disk activity to reach threshold level... I 14:44:51 Writing Sectors... W 14:44:51 Failed to Write Sectors 446080 - 446111 - Reason: Logical Unit Communication Time-Out W 14:44:51 Retrying (1 of 20)... W 14:44:55 Retry Failed - Reason: Invalid Address For Write W 14:44:55 Retrying (2 of 20)... W 14:44:55 Retry Failed - Reason: Invalid Address For Write W 14:44:55 Retrying (3 of 20)... W 14:44:55 Retry Failed - Reason: Invalid Address For Write W 14:44:55 Retrying (4 of 20)... W 14:44:55 Retry Failed - Reason: Invalid Address For Write W 14:44:55 Retrying (5 of 20)... W 14:44:55 Retry Failed - Reason: Invalid Address For Write W 14:44:55 Retrying (6 of 20)... W 14:44:55 Retry Failed - Reason: Invalid Address For Write W 14:44:55 Retrying (7 of 20)... W 14:44:55 Retry Failed - Reason: Invalid Address For Write W 14:44:55 Retrying (8 of 20)... W 14:44:55 Retry Failed - Reason: Invalid Address For Write W 14:44:55 Retrying (9 of 20)... W 14:44:55 Retry Failed - Reason: Invalid Address For Write W 14:44:55 Retrying (10 of 20)... W 14:44:55 Retry Failed - Reason: Invalid Address For Write W 14:44:55 Retrying (11 of 20)... W 14:44:55 Retry Failed - Reason: Invalid Address For Write W 14:44:55 Retrying (12 of 20)... W 14:44:55 Retry Failed - Reason: Invalid Address For Write W 14:44:55 Retrying (13 of 20)... W 14:44:55 Retry Failed - Reason: Invalid Address For Write W 14:44:55 Retrying (14 of 20)... W 14:44:55 Retry Failed - Reason: Invalid Address For Write W 14:44:55 Retrying (15 of 20)... W 14:44:55 Retry Failed - Reason: Invalid Address For Write W 14:44:55 Retrying (16 of 20)... W 14:44:55 Retry Failed - Reason: Invalid Address For Write W 14:44:55 Retrying (17 of 20)... W 14:44:55 Retry Failed - Reason: Invalid Address For Write W 14:44:55 Retrying (18 of 20)... W 14:44:55 Retry Failed - Reason: Invalid Address For Write W 14:44:55 Retrying (19 of 20)... W 14:44:55 Retry Failed - Reason: Invalid Address For Write W 14:44:55 Retrying (20 of 20)... W 14:44:55 Retry Failed - Reason: Invalid Address For Write W 14:45:12 Retrying (21)... W 14:45:12 Retry Failed - Reason: Invalid Address For Write W 14:45:13 Retrying (22)... W 14:45:13 Retry Failed - Reason: Invalid Address For Write E 14:45:27 Failed to Write Sectors 446080 - 446111 - Reason: Logical Unit Communication Time-Out E 14:45:27 Next Writable Address: 446096 I 14:45:28 Synchronising Cache... W 14:45:34 User opted to skip the 'Close Track/Session/Disc' functions. E 14:45:34 Failed to Write Image! I 14:45:34 Exporting Graph Data... I 14:45:34 Graph Data File: C:\Documents and Settings\Compaq_Administrator\Application Data\ImgBurn\Graph Data Files\ATAPI_iHAS124_B_AL0S_FRIDAY-MARCH-23-2012_2-38_PM_MKM-001-00_2.4x.ibg I 14:45:34 Export Successfully Completed! E 14:45:34 Operation Failed! - Duration: 00:06:39 I 14:45:34 Average Write Rate: 2,647 KB/s (1.9x) - Maximum Write Rate: 3,464 KB/s (2.5x)
LIGHTNING UK! Posted March 23, 2012 Posted March 23, 2012 By the looks of it you could do with installing some extra memory in that machine. There's hardly any left when you load the program and then you're telling ImgBurn to use a 71MB buffer. W 14:44:27 Waiting for buffers to recover... (LBA: 446080)W 14:44:49 Waiting for hard disk activity to reach threshold level... I 14:44:51 Writing Sectors... W 14:44:51 Failed to Write Sectors 446080 - 446111 - Reason: Logical Unit Communication Time-Out Had your buffer levels not depleted like that, maybe the burn would have worked. You might like to try enabling the 'Overspeed' option in the eeprom settings (Advanced Settings within ImgBurn) and burning at 4x instead of 2.4x.
Recommended Posts