andoyan Posted March 26, 2012 Posted March 26, 2012 Hello All, I am trying to copy a video DVD, my operating system is windows 7 pro. And I only have one DVD/cd burner, can someone walk me through how do I copy the video in the original DVD into another DVD using only one DVD burner? I would be greatly appreciate any and all help. Jon
scuzzy Posted March 27, 2012 Posted March 27, 2012 I am trying to copy a video DVD ... A normal enough use of ImgBurn ... my operating system is windows 7 pro. And I only have one DVD/cd burner Windows 7 is fine (ImgBurn works on all versions of Windows), and the fact that you have only one DVD drive is no problem at all - ImgBurn does not copy direct from one drive to another drive. The normal procedure is to use ImgBurn to make a copy of the DVD as "an image file" on your PC's hard drive, and then replace the original DVD by a blank writable DVD in the same drive, and use a second run of ImgBurn to copy the image file back onto the blank DVD. You should refer to the relevant guide in the "Guides" section of the forum : http://forum.imgburn.com/index.php?showtopic=6380 "How to copy a disc using ImgBurn" Of course, this procedure won't work if your original video DVD is a copy-protected DVD (e.g. most commercially produced video DVDs), because ImgBurn does not contain the ability to break copy-protection schemes. If that's what you want to achieve, you'll have to look for a different program.
Recommended Posts