Maciej Posted April 12, 2012 Posted April 12, 2012 Hi, For the past two years I've been successfully burning BD-R media, both single layer and double layer (RITEK-BR2-00, marketed as Maxell x4; MEI-RA1-7D, marketed as Panasonic x6; CMCMAG-DI6-00, marketed as MBI x6; and BD-REs marketed as TDK), using an LG BH08LS20, always with the latest firmware. In fact, I've oversped the Maxells and Panasonics to x8 with 100% success, and excellent playback results on both standalone and software players. Just after updating to ImageBurn 2.5.7.0, I tried to burn a few Blu-Ray films using the Panasonics oversped to x8, and I received a verify error. The burned disc was recognised both by standalone and software players, but the files highlighted as erroneous in the verify failed to play. However, when I burned the same Blu-Ray files at the disc's maximum nominal speed (x6), everything went smoothly. My question: has anything changed in version 2.5.7.0 that would make it difficult for me to overspeed burns using the LG BH08LS20, or should I try to alter any settings, or just stick to nominal speed. I'll just stress that the newer version of ImageBurn is the only variable altered in my system. Thanks in advance for any input:). Here is one my 'unsuccessful' logs: //****************************************\\ ; ImgBurn Version 2.5.7.0 - Log ; niedziela, 08 kwiecień 2012, 15:09:07 ; \\****************************************// ; ; I 14:33:17 ImgBurn Version 2.5.7.0 started! I 14:33:17 Microsoft Windows 7 Professional x64 Edition (6.1, Build 7601 : Service Pack 1) I 14:33:17 Total Physical Memory: 8 379 448 KB - Available: 4 928 644 KB I 14:33:17 Initialising SPTI... I 14:33:17 Searching for SCSI / ATAPI devices... I 14:33:17 -> Drive 1 - Info: HL-DT-ST BD-RE BH08LS20 2.00-03 (V:) (ATA) I 14:33:17 -> Drive 2 - Info: PLEXTOR DVDR PX-870A 1.08 (X:) (ATA) I 14:33:18 -> Drive 3 - Info: TSSTcorp CDDVDW SH-S222A SB02 (Y:) (ATA) I 14:33:18 -> Drive 4 - Info: ELBY CLONEDRIVE 1.4 (Z:) (SCSI) I 14:33:18 -> Drive 5 - Info: PLEXTOR DVDR PX-L890SA 1.07 (W:) (SATA) I 14:33:18 Found 3 DVD±RW/RAMs, 1 BD-ROM/HD DVD-ROM and 1 BD-RE! I 14:34:10 Operation Started! I 14:34:10 Building Image Tree... I 14:34:10 Calculating Totals... I 14:34:10 Preparing Image... I 14:34:10 Contents: 30 Files, 15 Folders I 14:34:10 Content Type: BD Video I 14:34:10 Data Type: MODE1/2048 I 14:34:10 File System(s): UDF (2.50) I 14:34:10 Volume Label: [Not Configured] I 14:34:10 Size: 23 793 430 260 bytes I 14:34:10 Sectors: 11 617 904 I 14:34:10 Image Size: 23 794 483 200 bytes I 14:34:10 Image Sectors: 11 618 400 I 14:34:10 Operation Successfully Completed! - Duration: 00:00:00 I 14:34:12 Operation Started! I 14:34:12 Building Image Tree... I 14:34:14 Calculating Totals... I 14:34:14 Preparing Image... I 14:34:14 Contents: 30 Files, 15 Folders I 14:34:14 Content Type: BD Video I 14:34:14 Data Type: MODE1/2048 I 14:34:14 File System(s): UDF (2.50) I 14:34:14 Volume Label: ARTUR_I_ZEMSTA_MALTAZARA I 14:34:14 Size: 23 793 430 260 bytes I 14:34:14 Sectors: 11 617 904 I 14:34:14 Image Size: 23 794 483 200 bytes I 14:34:14 Image Sectors: 11 618 400 I 14:34:15 Operation Successfully Completed! - Duration: 00:00:02 I 14:34:15 Operation Started! I 14:34:15 Source File: -==/\/[bUILD IMAGE]\/\==- I 14:34:15 Source File Sectors: 11 618 400 (MODE1/2048) I 14:34:15 Source File Size: 23 794 483 200 bytes I 14:34:15 Source File Volume Identifier: ARTUR_I_ZEMSTA_MALTAZARA I 14:34:15 Source File Volume Set Identifier: 4088744600B147F0 I 14:34:15 Source File Application Identifier: ImgBurn v2.5.7.0 I 14:34:15 Source File Implementation Identifier: ImgBurn I 14:34:15 Source File File System(s): UDF (2.50) I 14:34:15 Destination Device: [4:0:0] HL-DT-ST BD-RE BH08LS20 2.00 (V:) (ATA) I 14:34:15 Destination Media Type: BD-R (Disc ID: MEI-RA1-001) I 14:34:15 Destination Media Supported Write Speeds: 2x; 4x; 6x; 8x I 14:34:15 Destination Media Sectors: 12 219 392 I 14:34:15 Write Mode: BD I 14:34:15 Write Type: DAO I 14:34:15 Write Speed: MAX I 14:34:15 Hardware Defect Management Active: No I 14:34:15 BD-R Verify Not Required: Yes I 14:34:15 Link Size: Auto I 14:34:15 Lock Volume: Yes I 14:34:15 Test Mode: No I 14:34:15 OPC: No I 14:34:15 BURN-Proof: Enabled I 14:34:15 Write Speed Successfully Set! - Effective: 35 964 KB/s (8x) I 14:34:36 Filling Buffer... (40 MB) I 14:34:37 Writing LeadIn... I 14:34:38 Writing Session 1 of 1... (1 Track, LBA: 0 - 11618399) I 14:34:38 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 11618399) I 14:47:26 Synchronising Cache... I 14:47:28 Closing Track... I 14:47:29 Finalising Disc... I 14:47:37 Exporting Graph Data... I 14:47:37 Graph Data File: C:\Users\Maciej Zakrzewski\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_BH08LS20_2.00_8-KWIECIEŃ-2012_14-34_MEI-RA1-001_MAX.ibg I 14:47:37 Export Successfully Completed! I 14:47:37 Operation Successfully Completed! - Duration: 00:13:21 I 14:47:37 Average Write Rate: 30 295 KB/s (6.7x) - Maximum Write Rate: 36 326 KB/s (8.1x) I 14:47:37 Cycling Tray before Verify... W 14:47:46 Waiting for device to become ready... I 14:48:02 Device Ready! I 14:48:04 Operation Started! I 14:48:04 Source Device: [4:0:0] HL-DT-ST BD-RE BH08LS20 2.00 (V:) (ATA) I 14:48:04 Source Media Type: BD-R (Disc ID: MEI-RA1-001) I 14:48:04 Source Media Supported Write Speeds: 2x; 4x; 6x; 8x I 14:48:04 Image File: -==/\/[bUILD IMAGE]\/\==- I 14:48:04 Image File Sectors: 11 618 400 (MODE1/2048) I 14:48:04 Image File Size: 23 794 483 200 bytes I 14:48:04 Image File Volume Identifier: ARTUR_I_ZEMSTA_MALTAZARA I 14:48:04 Image File Volume Set Identifier: 4088744600B147F0 I 14:48:04 Image File Application Identifier: ImgBurn v2.5.7.0 I 14:48:04 Image File Implementation Identifier: ImgBurn I 14:48:04 Image File File System(s): UDF (2.50) I 14:48:04 Read Speed (Data/Audio): MAX / MAX I 14:48:05 Verifying Session 1 of 1... (1 Track, LBA: 0 - 11618399) I 14:48:05 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 11618399) W 14:57:33 Failed to Read Sectors 5898560 - 5898591 - Reason: Cannot Read Medium - Incompatible Format W 14:57:35 Failed to Read Sector 5898560 - Reason: Cannot Read Medium - Incompatible Format W 14:57:35 Sector 5898560 maps to File: \BDMV\STREAM\00000.m2ts E 15:09:01 Failed to Read Sector 5898560 - Reason: Cannot Read Medium - Incompatible Format E 15:09:01 Sector 5898560 maps to File: \BDMV\STREAM\00000.m2ts E 15:09:01 Failed to Verify Sectors! I 15:09:02 Exporting Graph Data... I 15:09:02 Graph Data File: C:\Users\Maciej Zakrzewski\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_BH08LS20_2.00_8-KWIECIEŃ-2012_14-34_MEI-RA1-001_MAX.ibg I 15:09:02 Export Successfully Completed! E 15:09:02 Operation Failed! - Duration: 00:20:57 I 15:09:02 Average Verify Rate: 9 392 KB/s (2.1x) - Maximum Verify Rate: 27 705 KB/s (6.2x) I 15:09:07 Close Request Acknowledged I 15:09:07 Closing Down... I 15:09:07 Shutting down SPTI... I 15:09:07 ImgBurn closed!
LIGHTNING UK! Posted April 12, 2012 Posted April 12, 2012 Nope, nothing has changed. This is purely a drive/firmware/media combo issue.
Maciej Posted April 12, 2012 Author Posted April 12, 2012 Hi LightningUK, Thanks for your prompt reply - appreciated as much as your fantastic programme:). I think I'll just stick to nominal speeds, and post if any related problems appear.
Recommended Posts