elo Posted April 14, 2012 Share Posted April 14, 2012 I have a ihas 324b with lt3 firmware on it when i use image burn my disks burns @2.4 starts fine but when it gets to 49% i get an I/O error (see picture attached). He is my log file below. //****************************************\\ ; ImgBurn Version 2.5.7.0 - Log ; Saturday, 14 April 2012, 19:11:55 ; \\****************************************// ; ; I 18:15:59 ImgBurn Version 2.5.7.0 started! I 18:15:59 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 18:15:59 Total Physical Memory: 4,192,440 KB - Available: 2,934,496 KB I 18:15:59 Initialising SPTI... I 18:15:59 Searching for SCSI / ATAPI devices... I 18:16:00 -> Drive 1 - Info: ATAPI iHAS324 B AL1B (G:) (ATA) I 18:16:00 -> Drive 2 - Info: TSSTcorp CDDVDW TS-H653N 0208 (F:) (ATA) I 18:16:00 -> Drive 3 - Info: TSSTcorp DVD-ROM SH-D162D SB01 (E:) (ATA) I 18:16:00 Found 1 DVD-ROM and 2 DVD±RW/RAMs! I 18:16:30 Operation Started! I 18:16:30 Source File: H:\Kinect Starwars\complex-kinectstarwars.dvd I 18:16:30 Source File Sectors: 4,267,015 (MODE1/2048) I 18:16:30 Source File Size: 8,738,846,720 bytes I 18:16:30 Source File Volume Identifier: DVD_ROM I 18:16:30 Source File Volume Set Identifier: 66234000MS UDFBridge I 18:16:30 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 18:16:30 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 18:16:30 Source File File System(s): ISO9660, UDF (1.50) I 18:16:30 Destination Device: [4:1:0] ATAPI iHAS324 B AL1B (G:) (ATA) I 18:16:30 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) I 18:16:30 Destination Media Supported Write Speeds: 4x, 6x, 8x I 18:16:30 Destination Media Sectors: 4,267,040 I 18:16:30 Write Mode: DVD I 18:16:30 Write Type: DAO I 18:16:30 Write Speed: 4x I 18:16:30 DVD+R DL Reserve Track: No I 18:16:30 Link Size: Auto I 18:16:30 Lock Volume: Yes I 18:16:30 Test Mode: No I 18:16:30 OPC: Yes I 18:16:30 BURN-Proof: Enabled I 18:16:30 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x) I 18:16:30 Book Type Setting: DVD-ROM I 18:16:30 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes I 18:17:31 Optimal L0 Data Zone Capacity: 2,133,520 I 18:17:31 Optimal L0 Data Zone Method: Copied From Original Disc I 18:17:31 Set L0 Data Zone Capacity Succeeded! I 18:17:32 Filling Buffer... (80 MB) I 18:17:35 Writing LeadIn... I 18:17:39 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 18:17:39 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 18:17:39 Writing Layer 0... (LBA: 0 - 2133519) W 18:31:46 Failed to Write Sectors 2117440 - 2117471 - Reason: No Additional Sense Information W 18:31:46 Retrying (1 of 20)... W 18:31:51 Retry Failed - Reason: Invalid Address For Write W 18:31:51 Retrying (2 of 20)... W 18:31:51 Retry Failed - Reason: Invalid Address For Write W 18:31:51 Retrying (3 of 20)... W 18:31:51 Retry Failed - Reason: Invalid Address For Write W 18:31:51 Retrying (4 of 20)... W 18:31:51 Retry Failed - Reason: Invalid Address For Write W 18:31:51 Retrying (5 of 20)... W 18:31:51 Retry Failed - Reason: Invalid Address For Write W 18:31:51 Retrying (6 of 20)... W 18:31:51 Retry Failed - Reason: Invalid Address For Write W 18:31:51 Retrying (7 of 20)... W 18:31:51 Retry Failed - Reason: Invalid Address For Write W 18:31:51 Retrying (8 of 20)... W 18:31:51 Retry Failed - Reason: Invalid Address For Write W 18:31:51 Retrying (9 of 20)... W 18:31:51 Retry Failed - Reason: Invalid Address For Write W 18:31:51 Retrying (10 of 20)... W 18:31:51 Retry Failed - Reason: Invalid Address For Write W 18:31:51 Retrying (11 of 20)... W 18:31:51 Retry Failed - Reason: Invalid Address For Write W 18:31:51 Retrying (12 of 20)... W 18:31:51 Retry Failed - Reason: Invalid Address For Write W 18:31:51 Retrying (13 of 20)... W 18:31:51 Retry Failed - Reason: Invalid Address For Write W 18:31:51 Retrying (14 of 20)... W 18:31:51 Retry Failed - Reason: Invalid Address For Write W 18:31:51 Retrying (15 of 20)... W 18:31:51 Retry Failed - Reason: Invalid Address For Write W 18:31:51 Retrying (16 of 20)... W 18:31:51 Retry Failed - Reason: Invalid Address For Write W 18:31:51 Retrying (17 of 20)... W 18:31:51 Retry Failed - Reason: Invalid Address For Write W 18:31:51 Retrying (18 of 20)... W 18:31:51 Retry Failed - Reason: Invalid Address For Write W 18:31:51 Retrying (19 of 20)... W 18:31:51 Retry Failed - Reason: Invalid Address For Write W 18:31:51 Retrying (20 of 20)... W 18:31:52 Retry Failed - Reason: Invalid Address For Write W 18:35:42 Retrying (21)... W 18:35:43 Retry Failed - Reason: Invalid Address For Write W 18:35:43 Retrying (22)... W 18:35:44 Retry Failed - Reason: Invalid Address For Write W 18:35:44 Retrying (23)... W 18:35:44 Retry Failed - Reason: Invalid Address For Write W 18:35:45 Retrying (24)... W 18:35:45 Retry Failed - Reason: Invalid Address For Write W 18:35:45 Retrying (25)... W 18:35:45 Retry Failed - Reason: Invalid Address For Write W 18:35:45 Retrying (26)... W 18:35:46 Retry Failed - Reason: Invalid Address For Write W 18:35:46 Retrying (27)... W 18:35:46 Retry Failed - Reason: Invalid Address For Write W 18:35:46 Retrying (28)... W 18:35:46 Retry Failed - Reason: Invalid Address For Write W 18:35:50 Retrying (29)... W 18:35:50 Retry Failed - Reason: Invalid Address For Write E 18:38:37 Failed to Write Sectors 2117440 - 2117471 - Reason: No Additional Sense Information E 18:38:38 Next Writable Address: 2116871 I 18:38:38 Synchronising Cache... I 18:38:44 Closing Track... I 18:38:48 Finalising Disc... W 18:45:46 Potential 'WaitImmediateIO' Deferred Error - (94%, 0/3) - Session Fixation Error Writing Lead Out W 18:45:46 Finalise Disc Failed! - Reason: Session Fixation Error Writing Lead Out E 18:47:53 Finalise Disc Failed! - Reason: Session Fixation Error Writing Lead Out E 18:47:53 Failed to Write Image! I 18:47:55 Exporting Graph Data... I 18:47:55 Graph Data File: C:\Users\Derek Phillips\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS324_B_AL1B_14-APRIL-2012_18-16_RICOHJPN-D01-67_4x.ibg I 18:47:55 Export Successfully Completed! E 18:47:55 Operation Failed! - Duration: 00:31:23 I 18:47:55 Average Write Rate: 3,363 KB/s (2.4x) - Maximum Write Rate: 5,757 KB/s (4.2x) I 19:11:55 Close Request Acknowledged I 19:11:55 Closing Down... I 19:11:55 Shutting down SPTI... I 19:11:55 ImgBurn closed! I have burned a disk earlier today worked fine. Any Suggestions Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted April 14, 2012 Share Posted April 14, 2012 We already tell people to use Verbatim double layer discs over all others and that's even more important why trying to overburn them (something they simply weren't ever designed for). http://forum.imgburn.com/index.php?showtopic=8000 Link to comment Share on other sites More sharing options...
Recommended Posts