acid06 Posted April 24, 2012 Posted April 24, 2012 I'm trying to use ImgBurn 2.5.7.0 to rip an image of a DVD but I can't, as I get the following error: "Sorry, using Read Mode to create an image file from a multi-track disc is not currently supported". I can't see why ImgBurn isn't able to rip this image and I think I've done it before, with older versions... anyway, below is the disc info, in case it helps. This DVD wasn't originally created by me, so I'm not sure how it was created, but I would guess it was created by some sort of DVR, since it was done by a third-party who converts VHS tapes to DVD. TSSTcorp CDDVDW SH-S203D SB01 (RAID) Current Profile: DVD-R Disc Information: Status: Complete State of Last Session: Complete Erasable: No Sessions: 1 Sectors: 1.628.624 Size: 3.335.421.952 bytes Time: 361:56:74 (MM:SS:FF) Supported Read Speeds: 2x; 4x; 6x; 8x; 12x; 16x Current Read Speed: 16x TOC Information: Session 1... (LBA: 0) -> Track 01 (Mode 1, LBA: 0 - 1628623) -> LeadOut (LBA: 1628624) Track Information: Session 1... -> Track 01 (LTSA: 0, LTS: 1520, LRA: 1519) -> Track 02 (LTSA: 1536, LTS: 256, LRA: 1567) -> Track 03 (LTSA: 1808, LTS: 748784, LRA: 750591) -> Track 04 (LTSA: 750608, LTS: 256, LRA: 750639) -> Track 05 (LTSA: 750880, LTS: 877616, LRA: 1628495) -> Track 06 (LTSA: 1628512, LTS: 16, LRA: 1628527) -> Track 07 (LTSA: 1628544, LTS: 16, LRA: 1628559) -> Track 08 (LTSA: 1628576, LTS: 16, LRA: 1628591) -> Track 09 (LTSA: 1628608, LTS: 16, LRA: 1628623) Pre-recorded Information: Manufacturer ID: TYG02 Recording Management Area Information: HL-DT-ST S6320 7/10/30 DVDRRW GDA-4164L Physical Format Information (Last Recorded): Book Type: DVD-R Part Version: 5 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196.608 Last Physical Sector of Data Area: 1.825.231 Last Physical Sector in Layer 0: 0 Thanks.
Recommended Posts