jamesr4199 Posted May 2, 2012 Posted May 2, 2012 Just tried to use Verbatim BR-R LTH Type 25 gb 6x discs and ingburn will not burn the disc. I get this error message. I/O Error! Device: [5:0:0] HL-DT-ST BD-RE GGW-H20L YL05 (G:) (RAID) SCSISATUS: 0X02 Interpertation: Write (12) - Sectors: 96 -127 Sence Area: 71 00 03 00 00 00 00 0A 37 2D 03 B4 0C 00 00 00 00 00 SK Interpretation: Medium Error ASC/ASCQ Interpretation: Write Error Does this mean that these discs are not compatable??? Thanks Jim
ianymaty Posted May 2, 2012 Posted May 2, 2012 Basicaly yes, the drive don't like the disc. A log would be more helpful than a screenshot. See the pink box at the top. From what I can see in the pic, the firmware on your drive is outdated. Try the latest, maybe it solves the problem for you. http://www.firmwarehq.com/download_1859-file_GGW-H20L_YL07(EW).zip.html
jamesr4199 Posted May 2, 2012 Author Posted May 2, 2012 (edited) /****************************************\\ ; ImgBurn Version 2.5.7.0 - Log ; Friday, 27 April 2012, 08:44:16 ; \\****************************************// ; ; I 08:18:32 ImgBurn Version 2.5.7.0 started! I 08:18:32 Microsoft Windows 7 Ultimate Edition (6.1, Build 7601 : Service Pack 1) I 08:18:32 Total Physical Memory: 2,881,060 KB - Available: 1,896,216 KB W 08:18:32 AnyDVD can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled! I 08:18:32 Initialising SPTI... I 08:18:32 Searching for SCSI / ATAPI devices... I 08:18:32 -> Drive 1 - Info: HL-DT-ST BD-RE GGW-H20L YL05 (G:) (RAID) I 08:18:32 -> Drive 2 - Info: HL-DT-ST BD-RE WH10LS30 1.00-06 (H:) (RAID) I 08:18:32 -> Drive 3 - Info: PLDS DVD+-RW DH-16A6S YD11 (F:) (RAID) I 08:18:32 -> Drive 4 - Info: TSSTcorp DVD-ROM TS-H353B D500 (E:) (RAID) I 08:18:32 Found 1 DVD-ROM, 1 DVD±RW/RAM, 1 BD-RE and 1 HD DVD-ROM/BD-RE! I 08:44:16 Close Request Acknowledged I 08:44:16 Closing Down... I 08:44:16 Shutting down SPTI... I 08:44:16 ImgBurn closed! ;OK here is the Log file. I just tried with Phillips BD-R 1-6x and got same result. I have loaded the new firmware and I'm going to try it now. Edited May 2, 2012 by jamesr4199
Recommended Posts