Power Calibration Error

Kieranearth · May 4, 2012

I get the Power Calibration Error when trying to burn to DL Disks, I have updated to the latest firmware and searched for a fix for this and have read this http://forum.imgburn.com/index.php?showtopic=8000. I want to try and get it too burn with the disks I have rather than wasting money on Verbatim when Therese disks have worked for me before I have also tried burning on different speeds with no avail.

Here is my Log.

I 14:16:21 ImgBurn Version 2.5.7.0 started!

I 14:16:21 Microsoft Windows 7 Ultimate Edition (6.1, Build 7601 : Service Pack 1)

I 14:16:21 Total Physical Memory: 1,572,216 KB - Available: 377,632 KB

W 14:16:21 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.

I 14:16:21 Initialising SPTI...

I 14:16:21 Searching for SCSI / ATAPI devices...

I 14:16:22 -> Drive 1 - Info: HP DVD Writer 630c CH01 (E:) (ATA)

I 14:16:25 -> Drive 2 - Info: TSSTcorp CDDVDW SH-S223B SB03 (D:) (ATA)

I 14:16:25 -> Drive 3 - Info: ANW QFKTEFO5QZ 3.5Z (F:) (SCSI)

I 14:16:25 Found 1 DVD±RW, 1 DVD±RW/RAM and 1 BD-ROM/HD DVD-ROM!

W 14:17:11 User accepted disc space warning and is attempting to truncate!

I 14:17:11 Operation Started!

I 14:17:11 Source File: C:\Users\Kieran\Desktop\complex-nfstherun.dvd

I 14:17:11 Source File Sectors: 4,267,015 (MODE1/2048)

I 14:17:11 Source File Size: 8,738,846,720 bytes

I 14:17:11 Source File Volume Identifier: DVD_ROM

I 14:17:11 Source File Volume Set Identifier: df7ac000MS UDFBridge

I 14:17:11 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 14:17:12 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 14:17:12 Source File File System(s): ISO9660, UDF (1.50)

I 14:17:12 Destination Device: [3:0:0] TSSTcorp CDDVDW SH-S223B SB03 (D:) (ATA)

I 14:17:12 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67)

I 14:17:12 Destination Media Supported Write Speeds: 4x, 6x, 8x

I 14:17:12 Destination Media Sectors: 4,173,824

I 14:17:12 Write Mode: DVD

I 14:17:12 Write Type: DAO

I 14:17:12 Write Speed: 2x

I 14:17:12 DVD+R DL Reserve Track: No

I 14:17:12 Link Size: Auto

I 14:17:12 Lock Volume: Yes

I 14:17:12 Test Mode: No

I 14:17:12 OPC: No

I 14:17:12 BURN-Proof: Enabled

W 14:17:12 Write Speed Miscompare! - Wanted: 2,770 KB/s (2x), Got: 5,540 KB/s (4x)

W 14:17:12 The drive only supports writing these discs at 4x, 6x, 8x.

I 14:17:12 Book Type Setting: DVD-ROM

W 14:17:12 Optimal layer break position exceeds L0 capacity.

W 14:17:12 Optimal L0 Sectors: 2,133,520

W 14:17:12 Maximum L0 Sectors: 2,086,912

I 14:17:12 Optimal L0 Data Zone Capacity: 2,133,520

I 14:17:12 Optimal L0 Data Zone Method: Copied From Original Disc

W 14:17:12 Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in Parameter List

I 14:17:14 Filling Buffer... (40 MB)

I 14:17:15 Writing LeadIn...

W 14:17:15 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error

W 14:17:15 Retrying (1 of 20)...

W 14:17:15 Retry Failed - Reason: Power Calibration Area Error

W 14:17:15 Retrying (2 of 20)...

W 14:17:15 Retry Failed - Reason: Power Calibration Area Error

W 14:17:15 Retrying (3 of 20)...

W 14:17:15 Retry Failed - Reason: Power Calibration Area Error

W 14:17:15 Retrying (4 of 20)...

W 14:17:15 Retry Failed - Reason: Power Calibration Area Error

W 14:17:15 Retrying (5 of 20)...