Jump to content

medium not present


huddles99

Recommended Posts

hi sorry for the bother im new here .... was burning dvds with no problems until yesterday where it stopped reading dvds ,i put in a dvd and nothing reads , tried a dvd and cd-r with stuff already in it and it wont even detect those if anyones got any suggestions id really appreciate it !

 

 

I 100755 ImgBurn Version 2.5.7.0 started!

I 100755 Microsoft Windows XP Professional (5.1, Build 2600 Service Pack 3)

I 100755 Total Physical Memory 2,095,088 KB - Available 1,773,620 KB

I 100755 Initialising SPTI...

I 100755 Searching for SCSI ATAPI devices...

I 100755 - Drive 1 - Info _NEC DVD+RW ND-1100A 10FD (D) (ATA)

I 100755 Found 1 DVD+RW!

 

thats what it said

Link to comment
Share on other sites

That burner is old and probably developed a fault, which is why it doesn't even read burned discs.

 

You should consider buying a new burner: not only they're cheap but they'll also burn your DVDs faster.

Link to comment
Share on other sites

In older drives it's usually a mechanical fault due to worn off parts that isn't worth fixing as it would probably cost more than new a burner and you'd still have an old burner that doesn't support most of the media of the current market.

Link to comment
Share on other sites

well i wasnt having any problem and was burnin discs untillast night but now it wont even read cd-r's which i weird cause i never had a drive that wasnt at least able to read cds .... thanks for your help guess i got no choice

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.