Jump to content

incompatible format at 98% done!!!!!??? what the hell! (red lettering is where everything went wrong) HELP!


milkweed227

Recommended Posts

I 18:36:34 Operation Started!

I 18:36:34 Source File: -==/\/[bUILD IMAGE]\/\==-

I 18:36:34 Source File Sectors: 608 (MODE1/2048)

I 18:36:34 Source File Size: 1,245,184 bytes

I 18:36:34 Source File Volume Identifier: GTA 4 Modded

I 18:36:34 Source File Volume Set Identifier: 40EF945500000257

I 18:36:34 Source File Application Identifier: IMGBURN V2.5.7.0 - THE ULTIMATE IMAGE BURNER!

I 18:36:34 Source File Implementation Identifier: ImgBurn

I 18:36:34 Source File File System(s): ISO9660, UDF (1.02)

I 18:36:34 Destination Device: [0:1:0] MATSHITA DVD-RAM UJ890AS 1.00 (D:) (ATAPI)

I 18:36:34 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67)

I 18:36:34 Destination Media Supported Write Speeds: 2.4x, 4x, 6x

I 18:36:34 Destination Media Sectors: 4,173,824

I 18:36:34 Write Mode: DVD

I 18:36:34 Write Type: DAO

I 18:36:34 Write Speed: 2.4x

I 18:36:34 DVD+R DL Reserve Track: No

I 18:36:34 Link Size: Auto

I 18:36:34 Lock Volume: Yes

I 18:36:34 Test Mode: No

I 18:36:34 OPC: No

I 18:36:34 BURN-Proof: Enabled

I 18:36:35 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x)

W 18:36:41 User accepted that image is smaller than the media specified 'Read Compatibility LBA'.

W 18:36:48 Optimal layer break position may not be 'Read Compatible'.

W 18:36:48 Optimal L0 Sectors: 304

W 18:36:48 Read Compatible L0 Sectors: 265,696

I 18:36:48 Optimal L0 Data Zone Capacity: 304

I 18:36:48 Optimal L0 Data Zone Method: ECC Block Boundary

I 18:37:07 Set L0 Data Zone Capacity Succeeded!

I 18:38:06 Filling Buffer... (40 MB)

I 18:38:09 Writing LeadIn...

I 18:38:14 Writing Session 1 of 1... (1 Track, LBA: 0 - 607)

I 18:38:14 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 607)

I 18:38:14 Writing Layer 0... (LBA: 0 - 303)

I 18:38:14 Writing Layer 1... (LBA: 304 - 607)

I 18:38:15 Synchronising Cache...

I 18:38:20 Closing Track...

I 18:38:21 Finalising Disc...

W 18:44:14 Potential 'WaitImmediateIO' Deferred Error - (89%, 0/3) - Tracking Servo Failure

W 18:44:14 Finalise Disc Failed! - Reason: Tracking Servo Failure

W 18:44:14 Retrying (1 of 3)...

W 18:44:14 Retry Failed - Reason: Cannot Write Medium - Incompatible Format

W 18:44:14 Retrying (2 of 3)...

W 18:44:14 Retry Failed - Reason: Cannot Write Medium - Incompatible Format

W 18:44:14 Retrying (3 of 3)...

W 18:44:14 Retry Failed - Reason: Cannot Write Medium - Incompatible Format

E 18:44:32 Finalise Disc Failed! - Reason: Tracking Servo Failure

E 18:44:32 Failed to Write Image!

I 18:44:35 Exporting Graph Data...

I 18:44:36 Graph Data File: C:\Users\Rita\AppData\Roaming\ImgBurn\Graph Data Files\MATSHITA_DVD-RAM_UJ890AS_1.00_SUNDAY-JULY-15-2012_6-36_PM_RICOHJPN-D01-67_2.4x.ibg

I 18:44:36 Export Successfully Completed!

E 18:44:41 Operation Failed! - Duration: 00:07:58

I 18:44:41 Average Write Rate: 1,216 KB/s (0.9x) - Maximum Write Rate: 1,216 KB/s (0.9x)

I 20:46:37 Close Request Acknowledged

I 20:46:38 Closing Down...

I 20:47:13 Shutting down SPTI...

I 20:47:22 ImgBurn closed!

Link to comment
Share on other sites

You do realise that whatever you've burnt there is just over 1MB is size yeah? It would fit on a floppy disc, let alone a DVD+R DL disc!

 

Anyway... read this:

 

http://forum.imgburn.com/index.php?showtopic=8000

 

Oh and the first error returned by the drive is the real one...

 

W 18:44:14 Potential 'WaitImmediateIO' Deferred Error - (89%, 0/3) - Tracking Servo Failure

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.