insaneoctane Posted July 26, 2012 Posted July 26, 2012 I have some new vertabim BD-RE DLs that I wanted to format. I stuck one in my Lite-on (iHBS112) and one in my LG (WH12LS38) and selected "ERASE>FULL" and got VERY different results (see logs at end of this posting). Lite-on was done in 1hr 33 minutes, LG took 4hr 17 minutes. Both are new burners capable of 2x BD-RE DL burns. Can anyone take a stab why such different results? Can I format these on the Lite-on and use them on the LG? LG: I 21:32:32 ImgBurn Version 2.5.7.0 started! I 21:32:32 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1) I 21:32:32 Total Physical Memory: 4,192,560 KB - Available: 2,022,820 KB W 21:32:32 AnyDVD can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled! I 21:32:32 Initialising SPTI... I 21:32:32 Searching for SCSI / ATAPI devices... I 21:32:32 -> Drive 1 - Info: ATAPI iHBS112 2 PL01 (V:) (RAID) I 21:32:32 -> Drive 2 - Info: HL-DT-ST BD-RE WH12LS38 1.00-D2 (W:) (RAID) I 21:32:32 Found 2 BD-REs! I 21:35:12 Operation Started! I 21:35:12 Device: [3:0:0] HL-DT-ST BD-RE WH12LS38 1.00 (W:) (RAID) I 21:35:12 Media Type: BD-RE (Disc ID: VERBAT-IM1-000) I 21:35:12 Media Supported Write Speeds: 2x I 21:35:12 Quick Erase: No I 21:35:12 Format Properly: Yes I 21:35:12 Format Size: Preferred I 21:35:12 Format With Full Certification: Yes I 21:35:12 Format Without Spare Areas: Yes I 21:35:12 Erasing Disc... I 00:19:27 Operation Successfully Completed! - Duration: 02:44:15 I 00:19:27 Operation Started! I 00:19:27 Device: [3:0:0] HL-DT-ST BD-RE WH12LS38 1.00 (W:) (RAID) I 00:19:27 Media Type: BD-RE (Disc ID: VERBAT-IM1-000) I 00:19:27 Media Supported Write Speeds: 2x I 00:19:27 Media Sectors: 24,438,784 I 00:19:27 BD-RE FastWrite: No I 00:19:27 Zeroing Sectors... I 01:52:35 Synchronising Cache... I 01:52:35 Operation Successfully Completed! - Duration: 01:33:07 - Total Duration: 04:17:23 I 01:52:35 Average Write Rate: 8,748 KB/s (1.9x) LITE-ON: I 21:27:26 ImgBurn Version 2.5.7.0 started! I 21:27:26 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1) I 21:27:26 Total Physical Memory: 4,192,560 KB - Available: 2,831,200 KB W 21:27:26 AnyDVD can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled! I 21:27:26 Initialising SPTI... I 21:27:26 Searching for SCSI / ATAPI devices... I 21:27:26 -> Drive 1 - Info: ATAPI iHBS112 2 PL01 (V:) (RAID) I 21:27:26 -> Drive 2 - Info: HL-DT-ST BD-RE WH12LS38 1.00-D2 (W:) (RAID) I 21:27:26 Found 2 BD-REs! I 21:35:35 Operation Started! I 21:35:35 Device: [3:1:0] ATAPI iHBS112 2 PL01 (V:) (RAID) I 21:35:35 Media Type: BD-RE (Disc ID: VERBAT-IM1-000) I 21:35:35 Media Supported Write Speeds: 2x I 21:35:35 Quick Erase: No I 21:35:35 Format Properly: Yes I 21:35:35 Format Size: Preferred I 21:35:35 Format With Full Certification: Yes I 21:35:35 Format Without Spare Areas: Yes I 21:35:36 Erasing Disc... I 21:36:30 Operation Successfully Completed! - Duration: 00:00:54 I 21:36:30 Operation Started! I 21:36:30 Device: [3:1:0] ATAPI iHBS112 2 PL01 (V:) (RAID) I 21:36:30 Media Type: BD-RE (Disc ID: VERBAT-IM1-000) I 21:36:30 Media Supported Write Speeds: 2x I 21:36:30 Media Sectors: 24,438,784 I 21:36:30 BD-RE FastWrite: No I 21:36:30 Zeroing Sectors... I 23:08:50 Synchronising Cache... I 23:08:51 Operation Successfully Completed! - Duration: 01:32:21 - Total Duration: 01:33:15 I 23:08:51 Average Write Rate: 8,821 KB/s (2.0x)
LIGHTNING UK! Posted July 26, 2012 Posted July 26, 2012 The LiteOn doesn't format with full certification properly. There's a newer firmware for the LiteOn btw. http://www.firmwarehq.com/Lite-On/iHBS112%2B2/files.html
insaneoctane Posted July 26, 2012 Author Posted July 26, 2012 (edited) Will the new firmware fix the problem? Is the LG's time the expected time for this size and type of disc? Thanks for your reply Edited July 27, 2012 by insaneoctane
insaneoctane Posted July 27, 2012 Author Posted July 27, 2012 (edited) Funny thing, I burned the same movie onto both discs and only the one formatted by the Lite-on was recognized by my PS3... Also, I successfully VERIFIED the burn with imgburn on the unrecognized LG formatted disc...I think I need some help. Edited July 27, 2012 by insaneoctane
LIGHTNING UK! Posted July 31, 2012 Posted July 31, 2012 I don't know if it will fix that problem... or if it's even a problem at all. LiteOn may have just decided to implement the format command differently. Yes, the time taken by the LG is normal for full certification. The drive's own full certification process should take slightly longer than the zeroing sectors part - thereby at least doubling the time it takes for the entire 'full erase' / format process.
Recommended Posts