drstratts Posted August 29, 2006 Posted August 29, 2006 I am getting the following error message after 10% burn: I/O Error. SciStatus: OXO2. Interpretation: Check Condition. CDB: 2A 00 00 03 AC AO 00 00 20 00. Interpretation: Write (10) - Sectors: 240800 - 240831. Sense Area ... Interpretation: No Seek Complete. I 19:33:36 ImgBurn Version 2.0.0.0 started! I 19:33:36 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2) I 19:33:36 Initialising SPTI... I 19:33:36 Searching for SCSI / ATAPI devices... I 19:33:36 Found 1 DVD-ROM and 1 DVD?RW! I 19:34:29 Operation Started! I 19:34:29 Source File: C:\THE_WIRE_S3_D3.ISO I 19:34:29 Source File Sectors: 2,285,866 (MODE1/2048) I 19:34:29 Source File Size: 4,681,453,568 bytes I 19:34:29 Source File Volume Identifier: THE_WIRE_S3_D3 I 19:34:29 Source File Implementation Identifier: DVD Shrink I 19:34:29 Source File File System(s): ISO9660, UDF (1.02) I 19:34:29 Destination Device: [0:1:0] HL-DT-ST DVD+-RW GWA4164B D108 (E:) (ATA) I 19:34:29 Destination Media Type: DVD+R (Disc ID: CMC MAG-M01-00) (Speeds: 4x, 8x, 12x, 16x) I 19:34:29 Destination Media Sectors: 2,295,104 I 19:34:29 Write Mode: DVD I 19:34:29 Write Type: DAO I 19:34:29 Write Speed: 4x I 19:34:29 Link Size: Auto I 19:34:29 Test Mode: No I 19:34:29 BURN-Proof: Enabled I 19:34:30 Filling Buffer... I 19:34:30 Writing LeadIn... I 19:35:10 Writing Image... W 19:36:45 Failed to Write Sectors 240800 - 240831 - No Seek Complete W 19:36:45 Retrying (1 of 20)... W 19:36:45 Retry Failed - Invalid Address For Write W 19:36:45 Retrying (2 of 20)... W 19:36:45 Retry Failed - Invalid Address For Write W 19:36:45 Retrying (3 of 20)... W 19:36:45 Retry Failed - Invalid Address For Write W 19:36:45 Retrying (4 of 20)... W 19:36:45 Retry Failed - Invalid Address For Write W 19:36:45 Retrying (5 of 20)... W 19:36:45 Retry Failed - Invalid Address For Write W 19:36:45 Retrying (6 of 20)... W 19:36:45 Retry Failed - Invalid Address For Write W 19:36:45 Retrying (7 of 20)... W 19:36:45 Retry Failed - Invalid Address For Write W 19:36:45 Retrying (8 of 20)... W 19:36:45 Retry Failed - Invalid Address For Write W 19:36:45 Retrying (9 of 20)... W 19:36:45 Retry Failed - Invalid Address For Write W 19:36:45 Retrying (10 of 20)... W 19:36:45 Retry Failed - Invalid Address For Write W 19:36:45 Retrying (11 of 20)... W 19:36:45 Retry Failed - Invalid Address For Write W 19:36:45 Retrying (12 of 20)... W 19:36:45 Retry Failed - Invalid Address For Write W 19:36:45 Retrying (13 of 20)... W 19:36:45 Retry Failed - Invalid Address For Write W 19:36:45 Retrying (14 of 20)... W 19:36:45 Retry Failed - Invalid Address For Write W 19:36:45 Retrying (15 of 20)... W 19:36:45 Retry Failed - Invalid Address For Write W 19:36:45 Retrying (16 of 20)... W 19:36:45 Retry Failed - Invalid Address For Write W 19:36:45 Retrying (17 of 20)... W 19:36:45 Retry Failed - Invalid Address For Write W 19:36:45 Retrying (18 of 20)... W 19:36:45 Retry Failed - Invalid Address For Write W 19:36:45 Retrying (19 of 20)... W 19:36:45 Retry Failed - Invalid Address For Write W 19:36:45 Retrying (20 of 20)... W 19:36:45 Retry Failed - Invalid Address For Write E 19:40:11 Failed to Write Sectors 240800 - 240831 - No Seek Complete I 19:40:11 Synchronising Cache... I 19:40:12 Closing Track... I 19:40:13 Finalising Disc... E 19:40:14 Failed to Write Image! E 19:40:14 Operation Failed! - Duration: 00:05:44 I 19:40:14 Average Write Rate: 1,605 KB/s (1.2x) - Maximum Write Rate: 5,618 KB/s (4.1x) This happens using Verbatim +R as well as Imation +R Thanks for the help.
kevdriver Posted August 30, 2006 Posted August 30, 2006 drstratts, Have you made sure your firmware for your drive is up to date. www.rpc1.org Also CMC MAG discs, forget about them, if you do manage a successful burn to them they won't last longer then a year maybe before they degrade to a point of not being able to be re-read. Maybe try using Verbatim -R media to burn to and see what happens. I use -R for SL burning and +R for DL burning, although I have no probs with burning to +R for SL data. Maybe your machine just doesn't like burning to those particular +R media.
cornholio7 Posted August 30, 2006 Posted August 30, 2006 http://forum.imgburn.com/index.php?showtopic=654 lfcrule1972 tested those discs in the link above -not very impressive at all
lfcrule1972 Posted August 30, 2006 Posted August 30, 2006 I remember those corny - they were terrible !
drstratts Posted August 30, 2006 Author Posted August 30, 2006 Here is an example of the problem using better media: I 18:35:49 ImgBurn Version 2.0.0.0 started! I 18:35:49 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2) I 18:35:49 Initialising SPTI... I 18:35:49 Searching for SCSI / ATAPI devices... I 18:35:49 Found 1 DVD-ROM and 1 DVD?RW! I 18:36:42 Operation Started! I 18:36:42 Source File: C:\THE_WIRE_S3_D3.ISO I 18:36:42 Source File Sectors: 2,285,866 (MODE1/2048) I 18:36:42 Source File Size: 4,681,453,568 bytes I 18:36:42 Source File Volume Identifier: THE_WIRE_S3_D3 I 18:36:42 Source File Implementation Identifier: DVD Shrink I 18:36:42 Source File File System(s): ISO9660, UDF (1.02) I 18:36:42 Destination Device: [0:1:0] HL-DT-ST DVD+-RW GWA4164B D108 (E:) (ATA) I 18:36:42 Destination Media Type: DVD+R (Disc ID: MCC-004-00) (Speeds: 4x, 8x, 12x, 16x) I 18:36:42 Destination Media Sectors: 2,295,104 I 18:36:42 Write Mode: DVD I 18:36:42 Write Type: DAO I 18:36:42 Write Speed: 4x I 18:36:42 Link Size: Auto I 18:36:42 Test Mode: No I 18:36:42 BURN-Proof: Enabled I 18:36:42 Filling Buffer... I 18:36:43 Writing LeadIn... I 18:37:17 Writing Image... W 18:39:19 Failed to Write Sectors 223328 - 223359 - No Seek Complete W 18:39:19 Retrying (1 of 20)... W 18:39:19 Retry Failed - Invalid Address For Write W 18:39:19 Retrying (2 of 20)... W 18:39:19 Retry Failed - Invalid Address For Write W 18:39:19 Retrying (3 of 20)... W 18:39:19 Retry Failed - Invalid Address For Write W 18:39:19 Retrying (4 of 20)... W 18:39:19 Retry Failed - Invalid Address For Write W 18:39:19 Retrying (5 of 20)... W 18:39:20 Retry Failed - Invalid Address For Write W 18:39:20 Retrying (6 of 20)... W 18:39:20 Retry Failed - Invalid Address For Write W 18:39:20 Retrying (7 of 20)... W 18:39:20 Retry Failed - Invalid Address For Write W 18:39:20 Retrying (8 of 20)... W 18:39:20 Retry Failed - Invalid Address For Write W 18:39:20 Retrying (9 of 20)... W 18:39:20 Retry Failed - Invalid Address For Write W 18:39:20 Retrying (10 of 20)... W 18:39:20 Retry Failed - Invalid Address For Write W 18:39:20 Retrying (11 of 20)... W 18:39:20 Retry Failed - Invalid Address For Write W 18:39:20 Retrying (12 of 20)... W 18:39:20 Retry Failed - Invalid Address For Write W 18:39:20 Retrying (13 of 20)... W 18:39:20 Retry Failed - Invalid Address For Write W 18:39:20 Retrying (14 of 20)... W 18:39:20 Retry Failed - Invalid Address For Write W 18:39:20 Retrying (15 of 20)... W 18:39:20 Retry Failed - Invalid Address For Write W 18:39:20 Retrying (16 of 20)... W 18:39:20 Retry Failed - Invalid Address For Write W 18:39:20 Retrying (17 of 20)... W 18:39:20 Retry Failed - Invalid Address For Write W 18:39:20 Retrying (18 of 20)... W 18:39:20 Retry Failed - Invalid Address For Write W 18:39:20 Retrying (19 of 20)... W 18:39:20 Retry Failed - Invalid Address For Write W 18:39:20 Retrying (20 of 20)... W 18:39:20 Retry Failed - Invalid Address For Write E 18:39:25 Failed to Write Sectors 223328 - 223359 - No Seek Complete I 18:39:25 Synchronising Cache... I 18:39:26 Closing Track... I 18:39:27 Finalising Disc... E 18:39:28 Failed to Write Image! E 18:39:28 Operation Failed! - Duration: 00:02:46 I 18:39:28 Average Write Rate: 3,489 KB/s (2.5x) - Maximum Write Rate: 5,618 KB/s (4.1x) My burner is fairly new but Dangerous Brothers have two firmware patches. I will next try one of them. Can someone please give me advice of this. Have not done this before. Thanks.
Defenestration Posted August 30, 2006 Posted August 30, 2006 (edited) I would've suggested that the problem was due to bad media, as the others have already mentioned, but since exactly the same problem also happens with different (and much better) media, then I would say it's either a problem with firmware or, more likely, a problem with the drive itself. If the drive's still under warranty then I'd suggest getting it replaced after trying out a new firmware. Edited August 30, 2006 by Defenestration
spinningwheel Posted August 30, 2006 Posted August 30, 2006 D108 Start ImgBurn in write mode, right click on your drive and scroll down the menu to the bottom. Click on firmware check and go on from there. I did a quick look at the site and couldn't find your firmware listed.
LIGHTNING UK! Posted August 31, 2006 Posted August 31, 2006 If yours is a Dell machine, get the E113 version from here http://forum.rpc1.org/dl_firmware.php?download_id=2279 Also, slowing decent media down to 4x doesn't mean you'll always get the best burn. They may do more work with higher speeds so be sure to try those too.
drstratts Posted September 1, 2006 Author Posted September 1, 2006 Flashed with E113 and got the same disappointing results: I 07:54:41 ImgBurn Version 2.0.0.0 started! I 07:54:41 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2) I 07:54:41 Initialising SPTI... I 07:54:41 Searching for SCSI / ATAPI devices... I 07:54:41 Found 1 DVD-ROM and 1 DVD?RW! I 07:56:51 Operation Started! I 07:56:51 Source File: C:\THE_WIRE_S3_D3.ISO I 07:56:51 Source File Sectors: 2,285,866 (MODE1/2048) I 07:56:51 Source File Size: 4,681,453,568 bytes I 07:56:51 Source File Volume Identifier: THE_WIRE_S3_D3 I 07:56:51 Source File Implementation Identifier: DVD Shrink I 07:56:51 Source File File System(s): ISO9660, UDF (1.02) I 07:56:51 Destination Device: [0:1:0] HL-DT-ST DVD+-RW GWA4164B E113 (E:) (ATA) I 07:56:51 Destination Media Type: DVD+R (Disc ID: MCC-004-00) (Speeds: 4x, 8x, 12x, 16x) I 07:56:51 Destination Media Sectors: 2,295,104 I 07:56:51 Write Mode: DVD I 07:56:51 Write Type: DAO I 07:56:51 Write Speed: 4x I 07:56:51 Link Size: Auto I 07:56:51 Test Mode: No I 07:56:51 BURN-Proof: Enabled I 07:56:52 Filling Buffer... I 07:56:54 Writing LeadIn... I 07:57:30 Writing Image... W 07:58:54 Failed to Write Sectors 213472 - 213503 - No Seek Complete W 07:58:54 Retrying (1 of 20)... W 07:58:54 Retry Failed - Invalid Address For Write W 07:58:54 Retrying (2 of 20)... W 07:58:54 Retry Failed - Invalid Address For Write W 07:58:54 Retrying (3 of 20)... W 07:58:54 Retry Failed - Invalid Address For Write W 07:58:54 Retrying (4 of 20)... W 07:58:54 Retry Failed - Invalid Address For Write W 07:58:54 Retrying (5 of 20)... W 07:58:54 Retry Failed - Invalid Address For Write W 07:58:54 Retrying (6 of 20)... W 07:58:54 Retry Failed - Invalid Address For Write W 07:58:54 Retrying (7 of 20)... W 07:58:54 Retry Failed - Invalid Address For Write W 07:58:54 Retrying (8 of 20)... W 07:58:54 Retry Failed - Invalid Address For Write W 07:58:54 Retrying (9 of 20)... W 07:58:54 Retry Failed - Invalid Address For Write W 07:58:54 Retrying (10 of 20)... W 07:58:54 Retry Failed - Invalid Address For Write W 07:58:54 Retrying (11 of 20)... W 07:58:54 Retry Failed - Invalid Address For Write W 07:58:54 Retrying (12 of 20)... W 07:58:54 Retry Failed - Invalid Address For Write W 07:58:54 Retrying (13 of 20)... W 07:58:54 Retry Failed - Invalid Address For Write W 07:58:54 Retrying (14 of 20)... W 07:58:54 Retry Failed - Invalid Address For Write W 07:58:54 Retrying (15 of 20)... W 07:58:54 Retry Failed - Invalid Address For Write W 07:58:54 Retrying (16 of 20)... W 07:58:54 Retry Failed - Invalid Address For Write W 07:58:54 Retrying (17 of 20)... W 07:58:54 Retry Failed - Invalid Address For Write W 07:58:54 Retrying (18 of 20)... W 07:58:54 Retry Failed - Invalid Address For Write W 07:58:54 Retrying (19 of 20)... W 07:58:54 Retry Failed - Invalid Address For Write W 07:58:54 Retrying (20 of 20)... W 07:58:54 Retry Failed - Invalid Address For Write E 07:59:17 Failed to Write Sectors 213472 - 213503 - No Seek Complete I 07:59:17 Synchronising Cache... I 07:59:18 Closing Track... I 07:59:19 Finalising Disc... E 07:59:20 Failed to Write Image! E 07:59:20 Operation Failed! - Duration: 00:02:28 I 07:59:20 Average Write Rate: 4,027 KB/s (2.9x) - Maximum Write Rate: 5,618 KB/s (4.1x) Do you recomend that I now try to replace the drive? If I go to Dell won't they just give me the same garbage that I initially paid for? Thanks.
LIGHTNING UK! Posted September 1, 2006 Posted September 1, 2006 Yeah they'll probably replace it with the same drive. Assuming that it is free, it's certainly worth a shot - even if it still doesn't work! After that, you can buy any drive you like. They're pretty much all available for ?30 - ?40 so they're not stupidly expensive anymore(compared to the ?200 odd we were paying a few years ago!). Did you try burning at 8x, 12x, 16x btw?
drstratts Posted September 1, 2006 Author Posted September 1, 2006 Same heartbreaking results at the speeds you suggested. I think I will give Dell a call and see what they have to say. Thanks.
blutach Posted September 2, 2006 Posted September 2, 2006 A US-based friend of mine recently had the same problem and pestered Dell so much that they gave him a decent drive. Their recent problems may make them less pliable, however. Still, I have a 4163B and have never had an issue with it. So you may just have got a bad one. Good luck Regards
lfcrule1972 Posted September 4, 2006 Posted September 4, 2006 I would give Dell a call too - my friend got them to replace a faulty drive a few months back (NEC I think) and its all been grand ever since.
drstratts Posted September 6, 2006 Author Posted September 6, 2006 Just spent a long session with Dell on the phone. Did the E113 Firmware download and many other things. Never could get the burner to play a DVD. It would burn a small data file. Never did try to get it to burn a video. At the end of the session the guy started to talk about how it is forbidden to copy copy-protected DVDs, my DVD burner worked because it could copy a small data file and I had a DVD player to play DVDs: so I really didn't have a problem. I told him I wanted to copy videos that were not copy-protected and he seemed to think such things did not exist. He would not replace the drive. He suggested we do a full system restore instead. I did not want to lose my data, so we did not proceed. I guess I will back everything up and do the restore. Funny thing about Dell. They sell the DVD burner but do not provide software to make use of it. As far as I can tell it is not possible to burn from file with the Roxio software that comes with the computer.
Defenestration Posted September 6, 2006 Posted September 6, 2006 I've had similar "laborious" calls to DELL myself when something goes wrong. However, when I know for sure there is a problem after doing my own testing I just pretend to be following their instructions on the phone (with added delays to make it look like I'm doing it) and just keep telling them "No, that didn't work either", or for longer tasks I say "I'll try it and get back to you" (without actually doing it). After they've exhausted all avenues they say they'll replace the faulty part. So, I would suggest calling them back and saying you've done the system restore but the problem with the DVD drive still exists.
lfcrule1972 Posted September 6, 2006 Posted September 6, 2006 Yeah that's a good suggestion - ignore the trained chimp on the phone and pretend you have done all their tests, then say its vital you have this drive as you regularly back up your important home videos to DVD.
drstratts Posted September 8, 2006 Author Posted September 8, 2006 Just spent another long session with a Dell technician. They run a diagnostic test on the burner and it turns out fine. They then say that my problem can not be the burner because of the results of this test and want to do a full system restore. I can not do a full system restore because there are all sorts of things on my hard drive I can not back up because the burner does not work. Dell says hire a technician to back up the hard drive and then do the full system restore. We even tried to burn a DVD using IMGBURN. It failed as usual after 10%.
polopony Posted September 8, 2006 Posted September 8, 2006 did you really think Dell would take the blame ,you should have done what Defenstration says in his post above .Find a friend that has a USB external burner and try to burn with that or maybe you can borrow another drive that you know works and install that if it burns OK then you know your drive is shot
Defenestration Posted September 9, 2006 Posted September 9, 2006 (edited) I had a problem with the DVD-ROM/CD-RW drive of the first DELL laptop I had, but only had a return-to-base warranty. The problem only seemed to arise during playback of some DVD's (although admittedly I didn't do much burning at the time). When I called them to report the problem I followed all the steps they said to take (I was none the wiser at this time), including running DELL diagnostics. All the tests I performed indicated the drive ran perfectly, but yet the drive still had problems with playback of some DVD's. I even suggested that they get a copy of the DVD in question to play back, so that when I sent the laptop back to them they would be able to see the problem - DELL said we don't budget for things like that so it was my problem. After several calls I finally said "Look, I'm not happy with the drive because it's faulty and I can demonstrate that, despite the fact that you can't reproduce the problem. If you send the laptop back to me again without replacing the drive, I can tell you now that I will be calling you up again to report the same problem again, and the cycle will continue which helps no-one." (or words to that effect). I added a bit of fluff saying "This is my first DELL and I've been very happy with it up to now. However, the problem with the drive is putting me off buying a DELL ever again." Finally they agreed to send an on-site technician round (even though I was on a RTB warranty) and he replaced the drive. I offered to demonstrate the problem with the DVD in question (which I did) but he wasn't interested and just replaced the drive. After a second call when I had a problem with the power supply and had to go through a similar laborious process, I became wise and without following their instructions just told them every time "Tried that but it didn't work!". While you still have to go through the steps with them, which is procedure, it cuts down the time you spend before getting the part. When it comes to DELL, a little white lie never did them any damage. My new "technique" hasn't failed me since (As long as you sound sincere when you call) Edited September 9, 2006 by Defenestration
blutach Posted September 9, 2006 Posted September 9, 2006 Sad to see drstratts But a system restore will not kill documents in my docs etc. It is pretty safe. Regards
drstratts Posted September 11, 2006 Author Posted September 11, 2006 Thanks Defenestration and Blutach. Not sure you are right Blutach. Did a full system restore about a month ago. When trying to rid myself of Roxio I deleted my DVD player drrive. The restore wiped out everything. It was as if the computer was new again and all those programs had to be configured anew. I am going to try to back up my hard drive with a laptop. I may only be able to get on with Windows 2000. Not sure if this will work.
kevdriver Posted September 11, 2006 Posted September 11, 2006 How far back did you restore to drstratts? Maybe you went back far enough so as to restore to a time where you didn't have these items installed. Just wondering out loud........... Blus' pretty accurate about these things.
cornholio7 Posted September 11, 2006 Posted September 11, 2006 if you use windows system restore you wont lose the files but if you did a system restore with the cd rom you got when you bought the pc you will lose everything
blutach Posted September 11, 2006 Posted September 11, 2006 A Windows System Restore can go back as far as the number of restore points you have and is totally reversible. Regards
Recommended Posts