Harry Baules Posted August 14, 2012 Posted August 14, 2012 This is similar to the post by Aaron96. I have been using this drive for 6 months flawlessly. This week all of a sudden I've having lots of trouble burning my xbox 360 backups. I tried rebooting the pc and that helps sometimes. Even when it does work I usually only get one good burn and then the following ones fail. Here is the most current logs. ; //****************************************\\ ; ImgBurn Version 2.5.7.0 - Log ; Tuesday, 14 August 2012, 15:04:47 ; \\****************************************// ; ; I 14:58:09 ImgBurn Version 2.5.7.0 started! I 14:58:09 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 14:58:09 Total Physical Memory: 3,106,864 KB - Available: 1,786,404 KB I 14:58:09 Initialising SPTI... I 14:58:09 Searching for SCSI / ATAPI devices... I 14:58:09 -> Drive 1 - Info: ATAPI iHAS124 B AL0S (D:) (ATA) I 14:58:09 Found 1 DVD±RW/RAM! I 15:00:26 Operation Started! I 15:00:26 Source File: X:\Xbox 360\Need to Verify\injected\Need to Verify\Darksiders II.iso I 15:00:26 Source File Sectors: 4,267,015 (MODE1/2048) I 15:00:26 Source File Size: 8,738,846,720 bytes I 15:00:26 Source File Volume Identifier: DVD_ROM I 15:00:26 Source File Volume Set Identifier: f15c4000MS UDFBridge I 15:00:26 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 15:00:26 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 15:00:26 Source File File System(s): ISO9660, UDF (1.50) I 15:00:26 Destination Device: [0:0:0] ATAPI iHAS124 B AL0S (D:) (ATA) I 15:00:26 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) I 15:00:26 Destination Media Supported Write Speeds: 2.4x, 4x, 6x, 8x I 15:00:26 Destination Media Sectors: 4,267,040 I 15:00:26 Write Mode: DVD I 15:00:26 Write Type: DAO I 15:00:26 Write Speed: 4x I 15:00:27 DVD+R DL Reserve Track: No I 15:00:27 Link Size: Auto I 15:00:27 Lock Volume: Yes I 15:00:27 Test Mode: No I 15:00:27 OPC: Yes I 15:00:27 BURN-Proof: Enabled I 15:00:27 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x) I 15:00:27 Book Type Setting: DVD-ROM I 15:00:27 Advanced Settings - Force HT: Yes, Online HT: Yes, OverSpeed: No, SmartBurn: Yes I 15:01:25 Optimal L0 Data Zone Capacity: 2,133,520 I 15:01:25 Optimal L0 Data Zone Method: ECC Block Boundary I 15:01:25 Set L0 Data Zone Capacity Succeeded! I 15:01:25 Filling Buffer... (40 MB) I 15:01:25 Writing LeadIn... W 15:02:24 Failed to Write Sectors 0 - 31 - Reason: Timeout on Logical Unit W 15:02:24 Retrying (1 of 20)... W 15:03:26 Retry Failed - Reason: Timeout on Logical Unit W 15:03:26 Retrying (2 of 20)... W 15:03:33 Retry Failed - Reason: Write Error W 15:03:33 Retrying (3 of 20)... W 15:03:43 Retry Failed - Reason: Write Error W 15:03:43 Retrying (4 of 20)... W 15:03:44 Retry Failed - Reason: Write Error W 15:03:44 Retrying (5 of 20)... W 15:03:45 Retry Failed - Reason: Write Error W 15:03:45 Retrying (6 of 20)... W 15:03:49 Retry Failed - Reason: Write Error W 15:03:49 Retrying (7 of 20)... W 15:03:50 Retry Failed - Reason: Write Error W 15:03:50 Retrying (8 of 20)... W 15:03:54 Retry Failed - Reason: Write Error W 15:03:54 Retrying (9 of 20)... W 15:03:55 Retry Failed - Reason: Write Error W 15:03:55 Retrying (10 of 20)... W 15:03:56 Retry Failed - Reason: Write Error W 15:03:56 Retrying (11 of 20)... W 15:03:59 Retry Failed - Reason: Write Error W 15:03:59 Retrying (12 of 20)... W 15:04:00 Retry Failed - Reason: Write Error W 15:04:00 Retrying (13 of 20)... W 15:04:04 Retry Failed - Reason: Write Error W 15:04:04 Retrying (14 of 20)... W 15:04:05 Retry Failed - Reason: Write Error W 15:04:05 Retrying (15 of 20)... W 15:04:08 Retry Failed - Reason: Write Error W 15:04:08 Retrying (16 of 20)... W 15:04:12 Retry Failed - Reason: Write Error W 15:04:12 Retrying (17 of 20)... W 15:04:13 Retry Failed - Reason: Write Error W 15:04:13 Retrying (18 of 20)... W 15:04:22 Retry Failed - Reason: Write Error W 15:04:22 Retrying (19 of 20)... W 15:04:23 Retry Failed - Reason: Write Error W 15:04:23 Retrying (20 of 20)... W 15:04:24 Retry Failed - Reason: Write Error E 15:04:36 Failed to Write Sectors 0 - 31 - Reason: Timeout on Logical Unit I 15:04:36 Synchronising Cache... W 15:04:38 User opted to skip the 'Close Track/Session/Disc' functions. E 15:04:38 Failed to Write Image! E 15:04:38 Operation Failed! - Duration: 00:04:12 I 15:04:38 Average Write Rate: N/A - Maximum Write Rate: N/A I 15:04:47 Close Request Acknowledged I 15:04:47 Closing Down... I 15:04:47 Shutting down SPTI... I 15:04:47 ImgBurn closed! ; ; ; //****************************************\\ ; ImgBurn Version 2.5.7.0 - Log ; Tuesday, 14 August 2012, 14:49:17 ; \\****************************************// ; ; I 14:22:57 ImgBurn Version 2.5.7.0 started! I 14:22:57 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 14:22:57 Total Physical Memory: 3,106,864 KB - Available: 2,085,980 KB I 14:22:57 Initialising SPTI... I 14:22:57 Searching for SCSI / ATAPI devices... I 14:22:58 -> Drive 1 - Info: ATAPI iHAS124 B AL0S (D:) (ATA) I 14:22:58 Found 1 DVD±RW/RAM! I 14:23:11 Operation Started! I 14:23:11 Source File: X:\Xbox 360\Need to Verify\injected\Need to Verify\Darksiders II.iso I 14:23:11 Source File Sectors: 4,267,015 (MODE1/2048) I 14:23:11 Source File Size: 8,738,846,720 bytes I 14:23:11 Source File Volume Identifier: DVD_ROM I 14:23:11 Source File Volume Set Identifier: f15c4000MS UDFBridge I 14:23:11 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 14:23:11 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 14:23:11 Source File File System(s): ISO9660, UDF (1.50) I 14:23:11 Destination Device: [0:0:0] ATAPI iHAS124 B AL0S (D:) (ATA) I 14:23:11 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) I 14:23:11 Destination Media Supported Write Speeds: 2.4x, 4x, 6x, 8x I 14:23:11 Destination Media Sectors: 4,267,040 I 14:23:11 Write Mode: DVD I 14:23:11 Write Type: DAO I 14:23:11 Write Speed: 4x I 14:23:11 DVD+R DL Reserve Track: No I 14:23:11 Link Size: Auto I 14:23:11 Lock Volume: Yes I 14:23:11 Test Mode: No I 14:23:11 OPC: Yes I 14:23:11 BURN-Proof: Enabled I 14:23:11 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x) I 14:23:11 Book Type Setting: DVD-ROM I 14:23:11 Advanced Settings - Force HT: Yes, Online HT: Yes, OverSpeed: No, SmartBurn: Yes I 14:23:20 Optimal L0 Data Zone Capacity: 2,133,520 I 14:23:20 Optimal L0 Data Zone Method: ECC Block Boundary I 14:23:20 Set L0 Data Zone Capacity Succeeded! I 14:23:20 Filling Buffer... (40 MB) I 14:23:21 Writing LeadIn... I 14:23:23 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 14:23:23 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 14:23:23 Writing Layer 0... (LBA: 0 - 2133519) W 14:37:07 Failed to Write Sectors 2124256 - 2124287 - Reason: Write Error W 14:37:07 Retrying (1 of 20)... W 14:37:07 Retry Failed - Reason: Invalid Address For Write W 14:37:07 Retrying (2 of 20)... W 14:37:07 Retry Failed - Reason: Invalid Address For Write W 14:37:07 Retrying (3 of 20)... W 14:37:07 Retry Failed - Reason: Invalid Address For Write W 14:37:07 Retrying (4 of 20)... W 14:37:07 Retry Failed - Reason: Invalid Address For Write W 14:37:07 Retrying (5 of 20)... W 14:37:07 Retry Failed - Reason: Invalid Address For Write W 14:37:07 Retrying (6 of 20)... W 14:37:07 Retry Failed - Reason: Invalid Address For Write W 14:37:07 Retrying (7 of 20)... W 14:37:07 Retry Failed - Reason: Invalid Address For Write W 14:37:07 Retrying (8 of 20)... W 14:37:07 Retry Failed - Reason: Invalid Address For Write W 14:37:07 Retrying (9 of 20)... W 14:37:07 Retry Failed - Reason: Invalid Address For Write W 14:37:07 Retrying (10 of 20)... W 14:37:07 Retry Failed - Reason: Invalid Address For Write W 14:37:07 Retrying (11 of 20)... W 14:37:07 Retry Failed - Reason: Invalid Address For Write W 14:37:07 Retrying (12 of 20)... W 14:37:07 Retry Failed - Reason: Invalid Address For Write W 14:37:07 Retrying (13 of 20)... W 14:37:07 Retry Failed - Reason: Invalid Address For Write W 14:37:07 Retrying (14 of 20)... W 14:37:07 Retry Failed - Reason: Invalid Address For Write W 14:37:07 Retrying (15 of 20)... W 14:37:07 Retry Failed - Reason: Invalid Address For Write W 14:37:07 Retrying (16 of 20)... W 14:37:07 Retry Failed - Reason: Invalid Address For Write W 14:37:07 Retrying (17 of 20)... W 14:37:07 Retry Failed - Reason: Invalid Address For Write W 14:37:07 Retrying (18 of 20)... W 14:37:07 Retry Failed - Reason: Invalid Address For Write W 14:37:07 Retrying (19 of 20)... W 14:37:07 Retry Failed - Reason: Invalid Address For Write W 14:37:07 Retrying (20 of 20)... W 14:37:07 Retry Failed - Reason: Invalid Address For Write W 14:48:54 Retrying (21)... W 14:48:54 Retry Failed - Reason: Invalid Address For Write E 14:48:57 Failed to Write Sectors 2124256 - 2124287 - Reason: Write Error E 14:48:57 Next Writable Address: 2123693 I 14:48:57 Synchronising Cache... W 14:48:59 User opted to skip the 'Close Track/Session/Disc' functions. E 14:48:59 Failed to Write Image! I 14:48:59 Exporting Graph Data... I 14:48:59 Graph Data File: C:\Documents and Settings\Omarisol\Application Data\ImgBurn\Graph Data Files\ATAPI_iHAS124_B_AL0S_TUESDAY-AUGUST-14-2012_2-23_PM_MKM-003-00_4x.ibg I 14:48:59 Export Successfully Completed! E 14:48:59 Operation Failed! - Duration: 00:25:48 I 14:48:59 Average Write Rate: 2,771 KB/s (2.0x) - Maximum Write Rate: 5,618 KB/s (4.1x) I 14:49:17 Close Request Acknowledged I 14:49:17 Closing Down... I 14:49:17 Shutting down SPTI... I 14:49:17 ImgBurn closed!
Harry Baules Posted August 15, 2012 Author Posted August 15, 2012 burning xbox 360 games on IHAS drives using the custom firmware on Verbatims has never been recommended. As a matter of fact, I've tried many times with no success. And remember, I've been burning at 4x for 6 months. I haven't changed anything but all of a sudden i'm having to many errors.
LIGHTNING UK! Posted August 15, 2012 Posted August 15, 2012 Use the drive advanced settings feature to clear opc data. Then disable the online hyper tuning option in the same area and try again. Burn the .dvd file, not the .iso.
Harry Baules Posted August 16, 2012 Author Posted August 16, 2012 HI lightning. That did not help. I cleared the opc history and disabled online hypertuning. I then opened up imgburn and tried burning a game. It failed from the get go. here is the log: By the way, i did not use a dvd file as I have always burned succesfully straight from the image using the appropriate dvd layer break for the given file. I 19:05:51 ImgBurn Version 2.5.7.0 started! I 19:05:51 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 19:05:51 Total Physical Memory: 3,106,864 KB - Available: 1,898,028 KB I 19:05:51 Initialising SPTI... I 19:05:51 Searching for SCSI / ATAPI devices... I 19:05:52 -> Drive 1 - Info: ATAPI iHAS124 B AL0S (D:) (ATA) I 19:05:52 Found 1 DVD±RW/RAM! I 19:06:05 Operation Started! I 19:06:05 Source File: X:\Xbox 360\Need to Verify\injected\Need to Verify\Darksiders II.iso I 19:06:05 Source File Sectors: 4,267,015 (MODE1/2048) I 19:06:05 Source File Size: 8,738,846,720 bytes I 19:06:05 Source File Volume Identifier: DVD_ROM I 19:06:05 Source File Volume Set Identifier: f15c4000MS UDFBridge I 19:06:05 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 19:06:05 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 19:06:05 Source File File System(s): ISO9660, UDF (1.50) I 19:06:05 Destination Device: [0:0:0] ATAPI iHAS124 B AL0S (D:) (ATA) I 19:06:05 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) I 19:06:05 Destination Media Supported Write Speeds: 2.4x, 4x, 6x, 8x I 19:06:05 Destination Media Sectors: 4,267,040 I 19:06:05 Write Mode: DVD I 19:06:05 Write Type: DAO I 19:06:05 Write Speed: 4x I 19:06:05 DVD+R DL Reserve Track: No I 19:06:05 Link Size: Auto I 19:06:05 Lock Volume: Yes I 19:06:05 Test Mode: No I 19:06:05 OPC: Yes I 19:06:05 BURN-Proof: Enabled I 19:06:05 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x) I 19:06:05 Book Type Setting: DVD-ROM I 19:06:05 Advanced Settings - Force HT: Yes, Online HT: No, OverSpeed: No, SmartBurn: Yes I 19:06:41 Optimal L0 Data Zone Capacity: 2,133,520 I 19:06:41 Optimal L0 Data Zone Method: ECC Block Boundary I 19:06:41 Set L0 Data Zone Capacity Succeeded! I 19:06:41 Filling Buffer... (40 MB) I 19:06:42 Writing LeadIn... I 19:06:45 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 19:06:45 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 19:06:45 Writing Layer 0... (LBA: 0 - 2133519) W 19:06:55 Failed to Write Sectors 640 - 671 - Reason: Write Error W 19:06:55 Retrying (1 of 20)... W 19:06:56 Retry Failed - Reason: Invalid Address For Write W 19:06:56 Retrying (2 of 20)... W 19:06:56 Retry Failed - Reason: Invalid Address For Write W 19:06:56 Retrying (3 of 20)... W 19:06:56 Retry Failed - Reason: Invalid Address For Write W 19:06:56 Retrying (4 of 20)... W 19:06:56 Retry Failed - Reason: Invalid Address For Write W 19:06:56 Retrying (5 of 20)... W 19:06:56 Retry Failed - Reason: Invalid Address For Write W 19:06:56 Retrying (6 of 20)... W 19:06:56 Retry Failed - Reason: Invalid Address For Write W 19:06:56 Retrying (7 of 20)... W 19:06:56 Retry Failed - Reason: Invalid Address For Write W 19:06:56 Retrying (8 of 20)... W 19:06:56 Retry Failed - Reason: Invalid Address For Write W 19:06:56 Retrying (9 of 20)... W 19:06:56 Retry Failed - Reason: Invalid Address For Write W 19:06:56 Retrying (10 of 20)... W 19:06:56 Retry Failed - Reason: Invalid Address For Write W 19:06:56 Retrying (11 of 20)... W 19:06:56 Retry Failed - Reason: Invalid Address For Write W 19:06:56 Retrying (12 of 20)... W 19:06:56 Retry Failed - Reason: Invalid Address For Write W 19:06:56 Retrying (13 of 20)... W 19:06:56 Retry Failed - Reason: Invalid Address For Write W 19:06:56 Retrying (14 of 20)... W 19:06:56 Retry Failed - Reason: Invalid Address For Write W 19:06:56 Retrying (15 of 20)... W 19:06:56 Retry Failed - Reason: Invalid Address For Write W 19:06:56 Retrying (16 of 20)... W 19:06:56 Retry Failed - Reason: Invalid Address For Write W 19:06:56 Retrying (17 of 20)... W 19:06:56 Retry Failed - Reason: Invalid Address For Write W 19:06:56 Retrying (18 of 20)... W 19:06:56 Retry Failed - Reason: Invalid Address For Write W 19:06:56 Retrying (19 of 20)... W 19:06:56 Retry Failed - Reason: Invalid Address For Write W 19:06:56 Retrying (20 of 20)... W 19:06:56 Retry Failed - Reason: Invalid Address For Write E 19:13:53 Failed to Write Sectors 640 - 671 - Reason: Write Error E 19:13:53 Next Writable Address: 77 I 19:13:53 Synchronising Cache... W 19:13:58 User opted to skip the 'Close Track/Session/Disc' functions. E 19:13:58 Failed to Write Image! I 19:13:58 Exporting Graph Data... I 19:13:58 Graph Data File: C:\Documents and Settings\Omarisol\Application Data\ImgBurn\Graph Data Files\ATAPI_iHAS124_B_AL0S_WEDNESDAY-AUGUST-15-2012_7-06_PM_MKM-003-00_4x.ibg I 19:13:58 Export Successfully Completed! E 19:13:58 Operation Failed! - Duration: 00:07:53 I 19:13:58 Average Write Rate: 2 KB/s (0.0x) - Maximum Write Rate: 2 KB/s (0.0x) I 19:14:08 Close Request Acknowledged I 19:14:08 Closing Down... I 19:14:08 Shutting down SPTI... I 19:14:08 ImgBurn closed!
LIGHTNING UK! Posted August 16, 2012 Posted August 16, 2012 Have you tried with another spindle of Verbatims?
Harry Baules Posted August 16, 2012 Author Posted August 16, 2012 Yes, I started getting these errors with another spindle. Then I went out and purchased a new one. These logs are all from the new spindle.
LIGHTNING UK! Posted August 16, 2012 Posted August 16, 2012 If discs from multiple spindles (ideally, made in Singapore) are failing, maybe it's time you tried another drive.
Harry Baules Posted August 16, 2012 Author Posted August 16, 2012 Yes, they are made in singapore. Do you think the drive could be on its last legs so soon? After only 6 months?
LIGHTNING UK! Posted August 16, 2012 Posted August 16, 2012 Well it's the drive that's erroring out as it tries to write to the disc...so it should really only be those 2 things that could be causing the problem.
Harry Baules Posted August 16, 2012 Author Posted August 16, 2012 Well it's the drive that's erroring out as it tries to write to the disc...so it should really only be those 2 things that could be causing the problem. I just went to the forum where I get my games. Others are reporting that these IHAS drives are starting to fail at about 6 months. Has to be the drive then. Ok i'm ordering a new one. Unfortunately it has to be another IHAS because I use it mainly for xbox 360 games. I'll report back when I get it.
Harry Baules Posted August 25, 2012 Author Posted August 25, 2012 UPDATE: I took a risk and ordered just the laser. It's a pretty simple replacement. Anyhow, it worked! My burner is back to normal. I wanted people to know that they have an option instead of just buying a new IHAS drive, you can just replace the laser when it starts to fail. Especially since people are saying that the B drives have been discontinued. Thanks everyone for your help.
Recommended Posts