Burning Stops

[il-paggi]

Hi, I tried several times to Burn a +DL DVD (XBOX game)

Everytime I try to burn the burning stops at different stages.

The Write Rate goes down to 0 and stays like that, no errors are shown the time keeps on going.

 

Can you help me please, I already wasted like 5 DL DVDs (Verbatim)

[LIGHTNING UK!]

It's probably due to the controller your drive is attached to.

 

Just copy + paste everything from the log window once it has got stuck - or if you don't have that info, just get us what's shown when you start the program.

[il-paggi]

Startup

 

I 18:59:12 ImgBurn Version 2.5.7.0 started!

I 18:59:12 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600 : Service Pack 1)

I 18:59:12 Total Physical Memory: 4,192,824 KB - Available: 2,539,872 KB

I 18:59:12 Initialising SPTI...

I 18:59:12 Searching for SCSI / ATAPI devices...

I 18:59:12 -> Drive 1 - Info: PIONEER BD-ROM BDC-202 1.07 (E:) (ATA)

I 18:59:12 Found 1 BD-RE!

[LIGHTNING UK!]

Ok, load the program again and switch to Write mode.

 

Then right click the drive selection box and pick 'Family Tree'. Close the prompt and copy + paste the contents of the log window again please.

[il-paggi]

Thanks a lot for your help.

 

I 19:56:55 ImgBurn Version 2.5.7.0 started!

I 19:56:55 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600 : Service Pack 1)

I 19:56:55 Total Physical Memory: 4,192,824 KB - Available: 2,545,412 KB

I 19:56:55 Initialising SPTI...

I 19:56:55 Searching for SCSI / ATAPI devices...

I 19:56:55 -> Drive 1 - Info: PIONEER BD-ROM BDC-202 1.07 (E:) (ATA)

I 19:56:55 Found 1 BD-RE!

I 19:57:26 Device: [3:0:0] PIONEER BD-ROM BDC-202 1.07 (E:) (ATA)

I 19:57:26 Family Tree:

I 19:57:26 -> ACPI x64-based PC

I 19:57:26 -> Microsoft ACPI-Compliant System

I 19:57:26 -> PCI bus

I 19:57:26 -> NVIDIA nForce Serial ATA Controller (VEN_10DE&DEV_037F - NVIDIA - nvstor64 - v11.1.0.23)

I 19:57:26 -> CD-ROM Drive (PIONEER BD-ROM BDC-202 SCSI CdRom Device) (Bus Number 0, Target Id 0, LUN 0)

[LIGHTNING UK!]

Ah, I see you have an nvidia chipset motherboard... I'm not a fan of anything non-Intel really!

 

All I can suggest is that you try some different motherboard/chipset drivers - or possibly try to revert to the standard Microsoft ones built into Windows.

 

You may even like to try switching your controller into AHCI mode via the BIOS and see if that makes a difference - you may need to make a quick registry edit in order to make the machine boot up in AHCI mode (do it when back in ATA/IDE mode). Try it and see.

[il-paggi]

I'm looking to buy a laptop. Will I be able to copy XBOX games using IMGburn with this laptop --> 

HP Pavilion g6-2210sa 15.6" Laptop  ???