HELP My dvd wont burn

steve1808 · September 23, 2012

Hi im new to useing imgburn bc i was wanting to make a modded iso disk for Call of Duty: WaW. i tryed useing the motion flex v2.1 per modded iso but when i burned it i got about 55% complete and it came up with a error message. iv done that about 4 time and wasted for disks. I then tryed it with a new iso because my brother thought it might be a corrupt sector in the iso. So i tryed the cobra v1 iso. it got to 55% again today and failed with the same error message.

This is the log:

I 23:42:15 ImgBurn Version 2.5.7.0 started!

I 23:42:15 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7601 : Service Pack 1)

I 23:42:15 Total Physical Memory: 3,074,020 KB - Available: 1,300,164 KB

I 23:42:16 Initialising SPTI...

I 23:42:16 Searching for SCSI / ATAPI devices...

I 23:42:16 -> Drive 1 - Info: DTSOFT BDROM 1.05 (E:) (Virtual)

I 23:42:17 -> Drive 2 - Info: HL-DT-ST DVDRAM GT30N 1.01-09 (D:) (ATAPI)

I 23:42:17 Found 1 DVD±RW/RAM and 1 BD-ROM!

I 00:01:29 Operation Started!

I 00:01:29 Source File: C:\Users\Andy\Desktop\Call of duty Motion Flexv2.1\CoDWaW.dvd

I 00:01:29 Source File Sectors: 3,825,924 (MODE1/2048)

I 00:01:29 Source File Size: 7,835,492,352 bytes

I 00:01:29 Source File Volume Identifier: XGD2DVD_NTSC

I 00:01:29 Source File Volume Set Identifier: 34672923

I 00:01:29 Source File Implementation Identifier: Sonic Scenarist 3.1

I 00:01:29 Source File File System(s): ISO9660, UDF (1.02)

I 00:01:29 Destination Device: [0:1:0] HL-DT-ST DVDRAM GT30N 1.01 (D:) (ATAPI)

I 00:01:29 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66)

I 00:01:29 Destination Media Supported Write Speeds: 2.4x, 4x, 6x

I 00:01:29 Destination Media Sectors: 4,173,824

I 00:01:29 Write Mode: DVD

I 00:01:29 Write Type: DAO

I 00:01:29 Write Speed: 2.4x

I 00:01:29 DVD+R DL Reserve Track: No

I 00:01:29 Link Size: Auto

I 00:01:29 Lock Volume: Yes

I 00:01:29 Test Mode: No

I 00:01:29 OPC: No

I 00:01:29 BURN-Proof: Enabled

I 00:01:29 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x)

I 00:01:29 Book Type Setting: N/A (Reason: Invalid Command Operation Code)

I 00:01:29 User Specified L0 Data Zone Capacity: 1,913,760

I 00:01:29 Set L0 Data Zone Capacity Succeeded!

I 00:01:31 Filling Buffer... (80 MB)

I 00:01:33 Writing LeadIn...

I 00:01:52 Writing Session 1 of 1... (1 Track, LBA: 0 - 3825923)

I 00:01:52 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3825923)

I 00:01:52 Writing Layer 0... (LBA: 0 - 1913759)

I 00:22:04 Writing Layer 1... (LBA: 1913760 - 3825923)

W 00:22:41 Failed to Write Sectors 1927168 - 1927199 - Reason: Write Error

W 00:22:41 Retrying (1 of 20)...

W 00:25:51 Retry Failed - Reason: The request could not be performed because of an I/O device error.

W 00:25:51 Retrying (2 of 20)...

I 00:25:52 Writing Sectors...

W 00:28:54 Failed to Write Sectors 2140160 - 2140191 - Reason: Write Error

W 00:28:54 Retrying (1 of 20)...

W 00:32:04 Retry Failed - Reason: The request could not be performed because of an I/O device error.

W 00:32:04 Retrying (2 of 20)...

W 00:32:04 Retry Failed - Reason: Write Error

W 00:32:04 Retrying (3 of 20)...