Imb ID

[Adrianvdh]

when i read a disc ImgBurn changes the Imb ID to ImgBurn how to I change that to the orginal ID e.g. Daikin U.S. Comrec Lab

Edited October 1, 2012 by Adrianvdh

[LIGHTNING UK!]

No it doesn't.

[Adrianvdh]

Here I open an Image file i read and i put it into to write Mode and it says this after i wrote to a disc

Edited October 1, 2012 by Adrianvdh

[LIGHTNING UK!]

Well then you've built a new image rather than reading (sector by sector) what was already on the disc.

[Adrianvdh]

Oh ok so ImgBurn make a clean Image of a disc then..Sorry

[LIGHTNING UK!]

Yes, if you use 'Read' mode.

 

By the look of it, you've been using 'Build' mode.

[Adrianvdh]

But How I have be in read mode for all my discs

[LIGHTNING UK!]

You haven't been in Read mode if the Implementation ID is now 'ImgBurn' in your images (and the source disc doesn't also show 'ImgBurn'). It would only say that if ImgBurn has actually build the ISO (and the file system within it).

[Adrianvdh]

But i have been creating the ISO from Drives

[LIGHTNING UK!]

You really haven't.

 

Post me the log where you've read a disc to an image file so I can see the implementation ID before and after the read.

 

There's no code in ImgBurn that can even do what you're saying, so I know it can't possibly be happening!

[Adrianvdh]

I have been creating ISO from my discs in read mode!? thats what

 

 

I 14:00:13 ImgBurn Version 2.5.7.0 started!

I 14:00:13 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1)

I 14:00:13 Total Physical Memory: 8 379 444 KB - Available: 4 842 920 KB

I 14:00:13 Initialising SPTI...

I 14:00:13 Searching for SCSI / ATAPI devices...

I 14:00:13 -> Drive 1 - Info: DTSOFT BDROM 1.05 (T:) (Virtual)

I 14:00:14 -> Drive 2 - Info: ATAPI iHAS324 B AL1B (K:) (ATA)

I 14:00:14 -> Drive 3 - Info: HL-DT-ST BD-RE BH10LS30 1.01-A0 (E:) (ATA)

I 14:00:14 Found 1 DVD±RW/RAM, 1 BD-ROM and 1 BD-RE!

I 14:00:26 Operation Started!

I 14:00:26 Source Device: [2:1:0] ATAPI iHAS324 B AL1B (K:) (ATA)

I 14:00:26 Source Media Type: DVD-ROM (Book Type: DVD-ROM)

I 14:00:26 Source Media Sectors: 2 162 016 (Track Path: PTP)

I 14:00:26 Source Media Size: 4 427 808 768 bytes

I 14:00:26 Source Media Volume Identifier: Betrayed At 17

I 14:00:26 Source Media Volume Set Identifier: 40BD71350020FD53

I 14:00:26 Source Media Application Identifier: IMGBURN V2.5.7.0 - THE ULTIMATE IMAGE BURNER!

I 14:00:26 Source Media Implementation Identifier: ImgBurn

I 14:00:26 Source Media File System(s): ISO9660, UDF (1.02)

I 14:00:26 Read Speed (Data/Audio): MAX / 8x

I 14:00:26 Destination File: G:\Betrayed At 17.iso

I 14:00:26 Destination Free Space: 42 179 096 576 Bytes (41 190 524.00 KB) (40 225.12 MB) (39.28 GB)

I 14:00:26 Destination File System: NTFS

I 14:00:26 File Splitting: Auto

I 14:00:30 Reading Session 1 of 1... (1 Track, LBA: 0 - 2162015)

I 14:00:30 Reading Track 1 of 1... (MODE1/2048, LBA: 0 - 2162015)

I 14:12:54 Exporting Graph Data...

I 14:12:55 Graph Data File: C:\Users\Adrian\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS324_B_AL1B_30-SEPTEMBER-2012_02-00_PM_N-A.ibg

I 14:12:55 Export Successfully Completed!

I 14:12:55 Operation Successfully Completed! - Duration: 00:12:27

I 14:12:55 Average Read Rate: 5 788 KB/s (4.2x) - Maximum Read Rate: 8 442 KB/s (6.1x)

I 14:14:57 Close Request Acknowledged

I 14:14:57 Closing Down...

I 14:14:57 Shutting down SPTI...

I 14:14:57 ImgBurn closed!

;

Edited October 1, 2012 by Adrianvdh

[LIGHTNING UK!]

But that source disc has a file system built by ImgBurn.

 

Get a disc that *wasn't* built by ImgBurn and read that.

 

The ISO created from that (non ImgBurn built) disc won't display 'ImgBurn' as the Imp ID when you load it in Write mode, I promise you.

[Adrianvdh]

That is an original rental disc

[Adrianvdh]

Heres another one!!

 

I 21:38:19 ImgBurn Version 2.5.7.0 started!

I 21:38:19 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1)

I 21:38:19 Total Physical Memory: 8 379 444 KB - Available: 5 980 608 KB

W 21:38:19 DVDFab Passkey can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled!

I 21:38:19 Initialising SPTI...

I 21:38:19 Searching for SCSI / ATAPI devices...

I 21:38:19 -> Drive 1 - Info: DTSOFT BDROM 1.05 (T:) (Virtual)

I 21:38:20 -> Drive 2 - Info: ATAPI iHAS324 B AL1B (K:) (ATA)

I 21:38:20 -> Drive 3 - Info: HL-DT-ST BD-RE BH10LS30 1.01-A0 (E:) (ATA)

I 21:38:20 Found 1 DVD±RW/RAM, 1 BD-ROM and 1 BD-RE!

I 21:41:37 Operation Started!

I 21:41:37 Source Device: [3:0:0] HL-DT-ST BD-RE BH10LS30 1.01 (E:) (ATA)

I 21:41:37 Source Media Type: BD-R

I 21:41:37 Source Media Supported Write Speeds: 0.2x, 0.3x, 0.6x, 1x, 1.3x, 1.6x, 1.9x

I 21:41:37 Source Media Sectors: 20 727 456

I 21:41:37 Source Media Size: 42 449 829 888 bytes

I 21:41:37 Source Media Volume Identifier: TOWER_HEIST_G51

I 21:41:37 Source Media Volume Set Identifier: 8CE9E909C083CFE6_VOLUME_SET_ID

I 21:41:37 Source Media Application Identifier: APPLICATION_ID

I 21:41:37 Source Media Implementation Identifier: IMPLEMENTATION_ID

I 21:41:37 Source Media File System(s): UDF (2.50)

I 21:41:37 Read Speed (Data/Audio): MAX / 8x

I 21:41:37 Destination File: G:\Tower Heist.iso

I 21:41:37 Destination Free Space: 84 894 150 656 Bytes (82 904 444.00 KB) (80 961.37 MB) (79.06 GB)

I 21:41:37 Destination File System: NTFS

I 21:41:37 File Splitting: Auto

I 21:41:41 Reading Session 1 of 1... (1 Track, LBA: 0 - 20727455)

I 21:41:41 Reading Track 1 of 1... (MODE1/2048, LBA: 0 - 20727455)

I 22:28:55 Exporting Graph Data...

I 22:28:55 Graph Data File: C:\Users\Adrian\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_BH10LS30_1.01_29-SEPTEMBER-2012_09-41_PM_N-A.ibg

I 22:28:55 Export Successfully Completed!

I 22:28:55 Operation Successfully Completed! - Duration: 00:47:17

I 22:28:55 Average Read Rate: 14 612 KB/s (3.3x) - Maximum Read Rate: 21 198 KB/s (4.7x)

I 22:49:32 Close Request Acknowledged

I 22:49:32 Closing Down...

I 22:49:32 Shutting down SPTI...

I 22:49:32 ImgBurn closed!

[Adrianvdh]

But my problem was it did it just once to me with the 4.7 GB disc not my other DVDs or Blurays

Edited October 1, 2012 by Adrianvdh

[LIGHTNING UK!]

If that 'Betrayed At 17' was an original rental disc, the people that authored and created the master disc must have used ImgBurn for the job.

 

I bet that 'TOWER_HEIST_G51' ISO doesn't show ImgBurn in the Imp ID field once loaded in Write mode.

 

[Adrianvdh]

Oh how to i refresh the Forum to see if someone is said something

[LIGHTNING UK!]

Press F5 and use your eyes.

[Adrianvdh]

Let me check

[Adrianvdh]

No it has...

Edited October 1, 2012 by Adrianvdh

[Adrianvdh]

I a bit confused how do I add an photo the first time a post a message

[LIGHTNING UK!]

It has what?!

 

That screen shows exactly what it showed in the log when you read the disc.

 

I 21:41:37 Source Media Implementation Identifier: IMPLEMENTATION_ID

[Adrianvdh]

Wait a minute the orginal discs are make with the move/game on it when its make right? Then how did they use ImgBurn to make that disc or was that disc like a "Prototype"

[Adrianvdh]

But how did Betrayed at 17 have ImgBurn Imb ID set at that

[LIGHTNING UK!]

You can create a master image for replication/duplication with whatever program you want.

 

They've just decided to use ImgBurn.