Laughing Man Posted August 31, 2006 Posted August 31, 2006 W 15:04:22 Waiting for hard disk activity to reach threshold level... Is that what's slowing down my DVD burn? A bottleneck on my HDD?
volvofl10 Posted August 31, 2006 Posted August 31, 2006 from what you posted , its very hard to tell . was you doing a build and burn , or write mode ? if you could post a full log it may help us more , also, it will show us more of whats going on in the whole process. it needs to be a FULL log please
Laughing Man Posted August 31, 2006 Author Posted August 31, 2006 My log I 17:45:27 ImgBurn Version 2.0.0.0 started! I 17:45:27 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 17:45:27 Initialising SPTI... I 17:45:27 Searching for SCSI / ATAPI devices... I 17:45:27 Found 1 DVD-ROM and 1 DVD?RW/RAM! I 17:45:38 Operation Started! I 17:45:38 Source File: E:\My Documents\burn2.iso I 17:45:38 Source File Sectors: 2,162,348 (MODE1/2048) I 17:45:38 Source File Size: 4,428,488,704 bytes I 17:45:38 Source File Volume Identifier: 31 Aug 2006 I 17:45:38 Source File File System(s): ISO9660, Joliet I 17:45:38 Destination Device: [0:1:0] BENQ DVD DC DQ60 MRDC (G:) (ATA) I 17:45:38 Destination Media Type: DVD+R (Disc ID: AML-002-00) (Speeds: 2.4x, 4x) I 17:45:38 Destination Media Sectors: 2,295,104 I 17:45:38 Write Mode: DVD I 17:45:38 Write Type: DAO I 17:45:38 Write Speed: MAX I 17:45:38 Link Size: Auto I 17:45:38 Test Mode: No I 17:45:38 BURN-Proof: Enabled I 17:45:38 Filling Buffer... I 17:45:39 Writing LeadIn... I 17:46:04 Writing Image... W 17:46:48 Waiting for buffers to recover... W 17:46:49 Waiting for hard disk activity to reach threshold level... I 17:46:50 Writing Image... W 17:47:38 Waiting for buffers to recover... W 17:47:39 Waiting for hard disk activity to reach threshold level... I 17:47:40 Writing Image... W 17:49:13 Waiting for buffers to recover... W 17:49:15 Waiting for hard disk activity to reach threshold level... I 17:49:33 Writing Image... W 17:50:06 Waiting for buffers to recover... W 17:50:13 Waiting for hard disk activity to reach threshold level... I 17:50:21 Writing Image... W 17:50:46 Waiting for buffers to recover... W 17:50:46 Waiting for hard disk activity to reach threshold level... I 17:50:48 Writing Image... W 17:52:10 Waiting for buffers to recover... W 17:52:11 Waiting for hard disk activity to reach threshold level... I 17:52:12 Writing Image... W 17:53:07 Waiting for buffers to recover... W 17:53:08 Waiting for hard disk activity to reach threshold level... I 17:53:09 Writing Image... W 17:54:25 Waiting for buffers to recover... W 17:54:26 Waiting for hard disk activity to reach threshold level... I 17:54:27 Writing Image... W 17:56:00 Waiting for buffers to recover... W 17:56:00 Waiting for hard disk activity to reach threshold level... I 17:56:01 Writing Image... W 17:57:32 Waiting for buffers to recover... W 17:57:33 Waiting for hard disk activity to reach threshold level... I 17:57:34 Writing Image... W 17:58:18 Waiting for buffers to recover... W 17:58:21 Waiting for hard disk activity to reach threshold level... I 17:58:23 Writing Image... W 17:58:49 Waiting for buffers to recover... W 17:58:51 Waiting for hard disk activity to reach threshold level... I 17:58:52 Writing Image... W 18:00:13 Waiting for buffers to recover... W 18:00:14 Waiting for hard disk activity to reach threshold level... I 18:00:15 Writing Image... W 18:01:23 Waiting for buffers to recover... W 18:01:24 Waiting for hard disk activity to reach threshold level... I 18:01:25 Writing Image... W 18:02:22 Waiting for buffers to recover... W 18:02:24 Waiting for hard disk activity to reach threshold level... I 18:02:25 Writing Image... I 18:02:40 Synchronising Cache... I 18:02:42 Closing Track... I 18:02:45 Finalising Disc... I 18:03:06 Image MD5: c9ee27dd6c804700db8ea3ab16383a15 I 18:03:06 Operation Successfully Completed! - Duration: 00:17:28 I 18:03:06 Average Write Rate: 4,346 KB/s (3.1x) - Maximum Write Rate: 5,905 KB/s (4.3x) I 18:03:06 Cycling Tray before Verify... W 18:03:14 Waiting for device to become ready... I 18:03:31 Device Ready! I 18:03:31 Operation Started! I 18:03:31 Source Device: [0:1:0] BENQ DVD DC DQ60 MRDC (G:) (ATA) I 18:03:31 Source Media Type: DVD+R (Book Type: DVD-ROM) (Disc ID: AML-002-00) (Speeds: 2.4x, 4x) I 18:03:31 Image File: E:\My Documents\burn2.iso I 18:03:31 Image File Sectors: 2,162,348 (MODE1/2048) I 18:03:31 Image File Size: 4,428,488,704 bytes I 18:03:31 Image File Volume Identifier: 31 Aug 2006 I 18:03:31 Image File File System(s): ISO9660, Joliet I 18:03:31 Verifying Sectors... I 18:11:53 Device MD5: c9ee27dd6c804700db8ea3ab16383a15 I 18:11:53 Image MD5: c9ee27dd6c804700db8ea3ab16383a15 I 18:11:54 File Successfully Deleted: E:\My Documents\burn2.iso I 18:11:54 Operation Successfully Completed! - Duration: 00:08:22 I 18:11:54 Average Verify Rate: 8,632 KB/s (6.2x) - Maximum Verify Rate: 13,758 KB/s (9.9x)
cornholio7 Posted August 31, 2006 Posted August 31, 2006 your supported write speed for those discs are 4x so you cant burn them at 8x even though your burner may be an 8x drive try turning buffer recovery off in settings, see if it helps you with the buffer message 'try getting some better media too
Shamus_McFartfinger Posted September 1, 2006 Posted September 1, 2006 I 17:58:52 Writing Image...W 18:00:13 Waiting for buffers to recover... W 18:00:14 Waiting for hard disk activity to reach threshold level... Something to check would be to see if your source HD and your burner share an IDE channel. This would certainly bottleneck the burn process. Also, update your firmware. The latest version for your drive can be found here: http://support.benq.com/files/storage/Firm...W/DQ60/MREC.zip
LIGHTNING UK! Posted September 1, 2006 Posted September 1, 2006 If your hdd can't even sustain 4x write speed, something is definitely wrong. Check for cable sharing as mentioned by Shamus (get hdd + burner on different IDE channels) and use the 80 wire IDE cable. Then follow the DMA stuff / post in the FAQ. Once you've deleted + reinstalled the IDE controller, the hdd should probably register as UDMA 5 or 6 and the burner as UDMA 2 or 4.
polopony Posted September 1, 2006 Posted September 1, 2006 get better media to start with .Those discs are a step above pure crap .Buy some Verbatim or Taiyo Yudens and eliminate the media as the source of your problem
Laughing Man Posted September 1, 2006 Author Posted September 1, 2006 Ok, I'll suggest my dad to replace the medium he buys (my dad buys them, not me). And I don't remember if they're sharing IDE cables. I recently replaced my DVD drive as the old one stopped burning discs. But I believe I had it so my two HDDs were on one cable and my DVD drive on the other.
Laughing Man Posted September 18, 2006 Author Posted September 18, 2006 Hmm, I just notice the medium specifies it can burn at 8x..but imgburn says 4x. Hmm, any reason for this?
kevdriver Posted September 18, 2006 Posted September 18, 2006 Laughing Man, No matter what the packaging states on burn speed of medium, your burner must sense that its safe to only burn at certain speeds and which is what Img is reporting in her log. Another possibility is that the packaging is mislabeled, but I rather doubt that.
spinningwheel Posted September 19, 2006 Posted September 19, 2006 Did you upgrade your firmware as Shamus suggested?
Laughing Man Posted September 19, 2006 Author Posted September 19, 2006 (edited) Yeah, haven't had the time to check if it was on a seperate IDE cable though. I think it is though because I remember I set my primary HDD to master and secondary HDD to slave. Edit: it can read at 8x though. Probably doesn't mean much though. Edited September 19, 2006 by Laughing Man
Shamus_McFartfinger Posted September 19, 2006 Posted September 19, 2006 Yeah, haven't had the time to check if it was on a seperate IDE cable though. I think it is though because I remember I set my primary HDD to master and secondary HDD to slave. Are you using 40-wire or 80-wire IDE cable? Edit: it can read at 8x though. Probably doesn't mean much though. You're right. It doesn't mean anything. Burn speed is not only dictated by the media but also by the drives' firmware. The media might be rated at 8x but if the firmware is a bit dicky (like it is in one of my drives) it might only support burning that particular media at 4x or 6x.
karen cito Posted May 7, 2007 Posted May 7, 2007 I had the same problem with a really slow DVD burn. The ImgBurn folks solved the problem for me. It turned out that Windows XP slows down the disks turning them from DMA to PIO without you knowing it. See the references at http://forum.imgburn.com/index.php?showtopic=4032 Good luck! Karen Cito
Shamus_McFartfinger Posted May 7, 2007 Posted May 7, 2007 I had the same problem with a really slow DVD burn.The ImgBurn folks solved the problem for me. It turned out that Windows XP slows down the disks turning them from DMA to PIO without you knowing it. See the references at http://forum.imgburn.com/index.php?showtopic=4032 Good luck! Karen Cito PIO mode limits the drive speed to 2x. If your speed is above this (such as the original posters' question), it's not a DMA problem. The reason his drive wouldn't go above 4x is shown is this part of their logfile. I 17:45:38 Destination Media Type: DVD+R (Disc ID: AML-002-00) (Speeds: 2.4x, 4x) As you can see above, the maximum rated speed for this media is 4x and the reason for the slow burn.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now