Jump to content

trouble burning any games


kwazie

Recommended Posts

hi,

recently(last 2 months) i'm having a lot of trouble burning games.I did everything i could from installing the burnermax firmware, downloading the latest versions of imgburn over and over again, i've been through several guides on different sites on how to setup the imgburn settings and how to flash my drive, and everytime the burning process fails on 50% or the burning process goes perfectly, but i'll get the unreadable disc error after playing for 5 minutes on the xbox.

i've wasted over 10 dvd's now and getting the same problem. I've wasted all my verbatims discs, now i'm using mediarange discs(i used them before and they always worked perfectly) i also have used platinums for a while which also worked perfectly untill now. For some reason imgburn also asks me if i want to truncate or overburn after i downloaded the latest version: 2.5.7.0. which i've never had before...after i downloaded the latest version every single game i wish to burn fails!

drive: ATAPI iHAS124 B ALOS (ATA)

and my xbox is flashed LT+3.0....

this is what happens if it fails at 50%:

 

 

I 19:24:47 ImgBurn Version 2.5.7.0 started!

I 19:24:47 Microsoft Windows Vista Home Basic Edition (6.0, Build 6002 : Service Pack 2)

I 19:24:47 Total Physical Memory: 2.095.628 KB - Available: 636.420 KB

I 19:24:47 Initialising SPTI...

I 19:24:47 Searching for SCSI / ATAPI devices...

I 19:24:48 -> Drive 1 - Info: ATAPI iHAS124 B AL0S (E:) (ATA)

I 19:24:48 Found 1 DVD±RW/RAM!

W 19:25:28 User accepted disc space warning and is attempting to truncate!

I 19:25:28 Operation Started!

I 19:25:28 Source File: C:\Users\jp2\Documents\Downloads\complete\fifa 13\fifa13x-ind.dvd

I 19:25:28 Source File Sectors: 4.267.015 (MODE1/2048)

I 19:25:28 Source File Size: 8.738.846.720 bytes

I 19:25:28 Source File Volume Identifier: DVD_ROM

I 19:25:28 Source File Volume Set Identifier: 3a03c000MS UDFBridge

I 19:25:28 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 19:25:28 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 19:25:28 Source File File System(s): ISO9660; UDF (1.50)

I 19:25:28 Destination Device: [3:0:0] ATAPI iHAS124 B AL0S (E:) (ATA)

I 19:25:28 Destination Media Type: DVD+R DL (Disc ID: MBIPG101-R10-65)

I 19:25:28 Destination Media Supported Write Speeds: 4x; 6x; 8x

I 19:25:28 Destination Media Sectors: 4.173.824

I 19:25:28 Write Mode: DVD

I 19:25:28 Write Type: DAO

I 19:25:28 Write Speed: 4x

I 19:25:29 DVD+R DL Reserve Track: No

I 19:25:29 Link Size: Auto

I 19:25:29 Lock Volume: Yes

I 19:25:29 Test Mode: No

I 19:25:29 OPC: Yes

I 19:25:29 BURN-Proof: Enabled

I 19:25:29 Write Speed Successfully Set! - Effective: 5.540 KB/s (4x)

I 19:25:29 Book Type Setting: DVD-ROM

I 19:25:29 Advanced Settings - Force HT: Yes, Online HT: No, OverSpeed: No, SmartBurn: Yes

W 19:25:57 Optimal layer break position exceeds L0 capacity.

W 19:25:57 Optimal L0 Sectors: 2.133.520

W 19:25:57 Maximum L0 Sectors: 2.086.912

I 19:25:57 Optimal L0 Data Zone Capacity: 2.133.520

I 19:25:57 Optimal L0 Data Zone Method: Copied From Original Disc

W 19:25:57 Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in Parameter List

I 19:25:58 Filling Buffer... (80 MB)

I 19:26:00 Writing LeadIn...

I 19:26:02 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014)

I 19:26:02 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)

I 19:26:02 Writing Layer 0... (LBA: 0 - 2086911)

I 19:38:58 Writing Layer 1... (LBA: 2086912 - 4267014)

W 19:39:31 Failed to Write Sectors 2092928 - 2092959 - Reason: Write Error

W 19:39:31 Retrying (1 of 20)...

W 19:39:31 Retry Failed - Reason: Invalid Address For Write

W 19:39:31 Retrying (2 of 20)...

W 19:39:31 Retry Failed - Reason: Invalid Address For Write

W 19:39:31 Retrying (3 of 20)...

W 19:39:31 Retry Failed - Reason: Invalid Address For Write

W 19:39:31 Retrying (4 of 20)...

W 19:39:31 Retry Failed - Reason: Invalid Address For Write

W 19:39:31 Retrying (5 of 20)...

W 19:39:31 Retry Failed - Reason: Invalid Address For Write

W 19:39:31 Retrying (6 of 20)...

W 19:39:31 Retry Failed - Reason: Invalid Address For Write

W 19:39:31 Retrying (7 of 20)...

W 19:39:31 Retry Failed - Reason: Invalid Address For Write

W 19:39:31 Retrying (8 of 20)...

W 19:39:31 Retry Failed - Reason: Invalid Address For Write

W 19:39:31 Retrying (9 of 20)...

W 19:39:31 Retry Failed - Reason: Invalid Address For Write

W 19:39:31 Retrying (10 of 20)...

W 19:39:31 Retry Failed - Reason: Invalid Address For Write

W 19:39:31 Retrying (11 of 20)...

W 19:39:31 Retry Failed - Reason: Invalid Address For Write

W 19:39:31 Retrying (12 of 20)...

W 19:39:31 Retry Failed - Reason: Invalid Address For Write

W 19:39:31 Retrying (13 of 20)...

W 19:39:31 Retry Failed - Reason: Invalid Address For Write

W 19:39:31 Retrying (14 of 20)...

W 19:39:31 Retry Failed - Reason: Invalid Address For Write

W 19:39:31 Retrying (15 of 20)...

W 19:39:31 Retry Failed - Reason: Invalid Address For Write

W 19:39:31 Retrying (16 of 20)...

W 19:39:31 Retry Failed - Reason: Invalid Address For Write

W 19:39:31 Retrying (17 of 20)...

W 19:39:31 Retry Failed - Reason: Invalid Address For Write

W 19:39:31 Retrying (18 of 20)...

W 19:39:31 Retry Failed - Reason: Invalid Address For Write

W 19:39:31 Retrying (19 of 20)...

W 19:39:31 Retry Failed - Reason: Invalid Address For Write

W 19:39:31 Retrying (20 of 20)...

W 19:39:31 Retry Failed - Reason: Invalid Address For Write

E 19:39:35 Failed to Write Sectors 2092928 - 2092959 - Reason: Write Error

E 19:39:35 Next Writable Address: 2092351

I 19:39:35 Synchronising Cache...

W 19:39:38 User opted to skip the 'Close Track/Session/Disc' functions.

E 19:39:38 Failed to Write Image!

I 19:39:44 Exporting Graph Data...

I 19:39:44 Graph Data File: C:\Users\jp2\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS124_B_AL0S_WOENSDAG-10-OKTOBER-2012_19-25_MBIPG101-R10-65_4x.ibg

I 19:39:44 Export Successfully Completed!

E 19:39:44 Operation Failed! - Duration: 00:14:09

I 19:39:44 Average Write Rate: 5.154 KB/s (3.7x) - Maximum Write Rate: 5.634 KB/s (4.1x)

 

 

please help me...:3

Link to comment
Share on other sites

You don't have the modified firmware installed, that's why it's prompting for truncate/overburn.

 

I would assume the drive is failing to burn those 'MBIPG101-R10-65' discs because they're cheapo ones.

 

If the Verbatim ones burn and verify ok, that's all we really care about. Playback issues in your console are not our concern.

 

http://forum.imgburn.com/index.php?showtopic=12200

 

If you get a decent burn from your drive (and you know you can use kprobe etc to check that), there should be no problem - except if your console itself has one.

Link to comment
Share on other sites

yeah i know there is something wrong with my firmware...but i've installed it the right way(atleast what the guides and stuff tell me) and it worked perfectly before and i've never changed anything about it, untill i downloaded imgburn 2.5.7.0. thats when everything went wrong

and the disc unreadable error is just because it doesn't burn correctly...

and i know i use cheaper discs now cause i've ran out of verbatims, but these discs worked perfectly before so i don't see why they won't work now, and i've also got another set of discs(not verbatims) which also used to work good, and they're not working either.

but my question is what is wrong about my ''modified firmware'' or do i have to go to the ixtreme.net forums for that..?

thanks already.

Link to comment
Share on other sites

The program doesn't have any control over the burn, it just provides the drive with data. Success / failure comes from your drive/firmware/media combo.

 

Like I said, you don't have it installed. If you did, your drive would report the discs as being larger than they are designed to be and ImgBurn wouldn't ask you about truncating or overburning (because they'd appear large enough to hold the oversized image).

Link to comment
Share on other sites

i've installed the latest firmware on my drive over 3 times now and still get the same error that he asks if i want to truncate or overburn...

but then you'll probably say it's the discs but i've also used all my verbs and they failed aswell..

so i still don't know what to do or what's wrong...all i know is that it started after i downloaded imgburn 2.5.7.0 somehow, i tried to use 2.5.6.0. again but it didn't work..

and if there's something wrong about my drive i really don't know what it is, my local flasher doesn't know either....cause i'ts installed correctly!

thanks,

Link to comment
Share on other sites

AFAIK, the modified firmware applies the size changes to all DVD+R DL media... so I wouldn't blame the media for it not doing so.

 

I don't know what to tell you. ImgBurn offering truncate/overburn means the firmware isn't doing its job and reporting a larger available capacity.

Link to comment
Share on other sites

i've fixed the problem with the firmware, now it's fixed and it doesn't ask for overburn or truncate...although now comes another problem....

every single burn fails at verifying at 50%...now i've watched some other forums where people talked about it but it doesn't seem to work for me(once again -.-).

i don't know why it fails though..

this person/topic has the same problem as me but his fix doesn't work for me http://c4evaspeaks.com/topic/error-verifying-xgd3-isos/

maybe someone knows a solution...if it helps i can make an own log if neccesary

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.