MSIGuy Posted October 21, 2012 Share Posted October 21, 2012 I just got a new BD burner and I've been trying to burn some home theatre demo's I've grabbed from the net. I'm using the latest imgburn, updated my Lite On 112's firmware, and are using Optical Quantum BD-R DL 6x discs. I seem to get about half way through the disc, 50-53% (where it switches to layer two?) and it fails. Here is the log file, any help would be greatly appreciated. ; ; //****************************************\\ ; ImgBurn Version 2.5.7.0 - Log ; Sunday, 21 October 2012, 14:30:41 ; \\****************************************// ; ; I 13:49:36 ImgBurn Version 2.5.7.0 started! I 13:49:36 Microsoft Windows 7 Enterprise x64 Edition (6.1, Build 7601 : Service Pack 1) I 13:49:36 Total Physical Memory: 4,193,428 KB - Available: 2,335,004 KB I 13:49:36 Initialising SPTI... I 13:49:36 Searching for SCSI / ATAPI devices... I 13:49:36 -> Drive 1 - Info: ATAPI iHBS112 2 PL04 (F:) (ATAPI) I 13:49:36 -> Drive 2 - Info: TSSTcorp CDDVDW SH-S223Q SB00 (D:) (ATAPI) I 13:49:36 Found 1 DVD±RW/RAM and 1 BD-RE! I 13:53:52 Operation Started! I 13:53:52 Building Image Tree... I 13:54:04 Corrected file system selection for Blu-ray Video disc. I 13:54:04 Corrected UDF revision selection for Blu-ray Video disc. I 13:54:22 Calculating Totals... I 13:54:22 Preparing Image... I 13:54:22 Contents: 482 Files, 15 Folders I 13:54:22 Content Type: BD Video I 13:54:22 Data Type: MODE1/2048 I 13:54:22 File System(s): UDF (2.50) I 13:54:22 Volume Label: Home Theater Demonstration Bluray v2.0 I 13:54:22 Size: 49,584,852,960 bytes I 13:54:22 Sectors: 24,211,649 I 13:54:22 Image Size: 49,588,469,760 bytes I 13:54:22 Image Sectors: 24,213,120 I 13:54:33 Operation Successfully Completed! - Duration: 00:00:41 I 13:54:33 Operation Started! I 13:54:33 Source File: -==/\/[bUILD IMAGE]\/\==- I 13:54:33 Source File Sectors: 24,213,120 (MODE1/2048) I 13:54:33 Source File Size: 49,588,469,760 bytes I 13:54:33 Source File Volume Identifier: Home Theater Demonstration Bluray v2.0 I 13:54:33 Source File Volume Set Identifier: 41556EBA01717421 I 13:54:33 Source File Application Identifier: ImgBurn v2.5.7.0 I 13:54:33 Source File Implementation Identifier: ImgBurn I 13:54:33 Source File File System(s): UDF (2.50) I 13:54:33 Destination Device: [0:3:0] ATAPI iHBS112 2 PL04 (F:) (ATAPI) I 13:54:33 Destination Media Type: BD-R (Disc ID: CMCMAG-DI6-000) I 13:54:33 Destination Media Supported Write Speeds: 4x I 13:54:33 Destination Media Sectors: 24,438,784 I 13:54:33 Write Mode: BD I 13:54:33 Write Type: DAO I 13:54:33 Write Speed: MAX I 13:54:33 Hardware Defect Management Active: No I 13:54:33 BD-R Verify Not Required: Yes I 13:54:33 Link Size: Auto I 13:54:33 Lock Volume: Yes I 13:54:33 Test Mode: No I 13:54:33 OPC: No I 13:54:33 BURN-Proof: Enabled I 13:54:35 Write Speed Successfully Set! - Effective: 17,980 KB/s (4x) I 13:54:35 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes I 13:55:29 Filling Buffer... (40 MB) I 13:55:32 Writing LeadIn... I 13:55:33 Writing Session 1 of 1... (1 Track, LBA: 0 - 24213119) I 13:55:33 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 24213119) I 13:55:33 Writing Layer 0... (LBA: 0 - 12219391) I 14:18:55 Writing Layer 1... (LBA: 12219392 - 24213119) W 14:21:27 Failed to Write Sectors 12937696 - 12937727 - Reason: Write Error W 14:21:27 Retrying (1 of 20)... W 14:21:30 Retry Failed - Reason: Invalid Address For Write W 14:21:30 Retrying (2 of 20)... W 14:21:30 Retry Failed - Reason: Invalid Address For Write W 14:21:30 Retrying (3 of 20)... W 14:21:30 Retry Failed - Reason: Invalid Address For Write W 14:21:30 Retrying (4 of 20)... W 14:21:30 Retry Failed - Reason: Invalid Address For Write W 14:21:30 Retrying (5 of 20)... W 14:21:30 Retry Failed - Reason: Invalid Address For Write W 14:21:30 Retrying (6 of 20)... W 14:21:30 Retry Failed - Reason: Invalid Address For Write W 14:21:30 Retrying (7 of 20)... W 14:21:30 Retry Failed - Reason: Invalid Address For Write W 14:21:30 Retrying (8 of 20)... W 14:21:30 Retry Failed - Reason: Invalid Address For Write W 14:21:30 Retrying (9 of 20)... W 14:21:30 Retry Failed - Reason: Invalid Address For Write W 14:21:30 Retrying (10 of 20)... W 14:21:30 Retry Failed - Reason: Invalid Address For Write W 14:21:30 Retrying (11 of 20)... W 14:21:30 Retry Failed - Reason: Invalid Address For Write W 14:21:30 Retrying (12 of 20)... W 14:21:30 Retry Failed - Reason: Invalid Address For Write W 14:21:30 Retrying (13 of 20)... W 14:21:30 Retry Failed - Reason: Invalid Address For Write W 14:21:30 Retrying (14 of 20)... W 14:21:30 Retry Failed - Reason: Invalid Address For Write W 14:21:30 Retrying (15 of 20)... W 14:21:30 Retry Failed - Reason: Invalid Address For Write W 14:21:30 Retrying (16 of 20)... W 14:21:30 Retry Failed - Reason: Invalid Address For Write W 14:21:30 Retrying (17 of 20)... W 14:21:30 Retry Failed - Reason: Invalid Address For Write W 14:21:30 Retrying (18 of 20)... W 14:21:30 Retry Failed - Reason: Invalid Address For Write W 14:21:30 Retrying (19 of 20)... W 14:21:30 Retry Failed - Reason: Invalid Address For Write W 14:21:30 Retrying (20 of 20)... W 14:21:30 Retry Failed - Reason: Invalid Address For Write W 14:21:52 Retrying (21)... W 14:21:52 Retry Failed - Reason: Invalid Address For Write W 14:21:54 Retrying (22)... W 14:21:54 Retry Failed - Reason: Invalid Address For Write E 14:21:55 Failed to Write Sectors 12937696 - 12937727 - Reason: Write Error E 14:21:55 Next Writable Address: 0 I 14:21:56 Synchronising Cache... I 14:22:04 Closing Track... I 14:22:50 Finalising Disc... E 14:23:41 Failed to Write Image! I 14:23:41 Exporting Graph Data... I 14:23:41 Graph Data File: C:\Users\XXXXX\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHBS112_2_PL04_SUNDAY-OCTOBER-21-2012_1-54_PM_CMCMAG-DI6-000_MAX.ibg I 14:23:41 Export Successfully Completed! E 14:23:41 Operation Failed! - Duration: 00:29:07 I 14:23:41 Average Write Rate: 16,356 KB/s (3.6x) - Maximum Write Rate: 18,146 KB/s (4.0x) I 14:30:40 Close Request Acknowledged I 14:30:40 Closing Down... I 14:30:41 Shutting down SPTI... I 14:30:41 ImgBurn closed! ; Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted October 21, 2012 Share Posted October 21, 2012 PL05 is the latest firmware for that drive. http://www.firmwarehq.com/Lite-On/iHBS112%2B2/files.html Your drive is reporting a 'Write Error' as it tries to burn the disc... so it must be running into some issue with it. Try discs with a different (better) dye / MID. Perhaps the iHBS112 (at least with PL04 firmware) isn't very good at burning 'CMCMAG-DI6-000' discs. Link to comment Share on other sites More sharing options...
MSIGuy Posted October 21, 2012 Author Share Posted October 21, 2012 Thanks for the reply. I have had discs fail with both PL04 and after I updated to PL05. The last disc I tried was with the write speed forced to 6x like the media states. So other than the media being bad there's nothing in the log file that points to anything being setup wrong? Correct file system, etc? It would be unfortunate if it was all the media's fault, I bought a spindel of it. Is there anything else you could recommend? Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted October 21, 2012 Share Posted October 21, 2012 I 13:54:33 Destination Media Supported Write Speeds: 4x The drive says it only supports the discs at 4x and you can't make it do something it doesn't want to - it'll just ignore any request for an unsupported speed. Nothing about what you're burning can cause a burn to fail. So the file system etc don't even come into it. This is purely a drive/firmware/media combo issue. Link to comment Share on other sites More sharing options...
MSIGuy Posted October 22, 2012 Author Share Posted October 22, 2012 I seem to have figgured the problem out. After seeing a few others with problems like mine I turned on the HT and online HT options in the drive settings and I've burned 2 sucessful discs since then! Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted October 22, 2012 Share Posted October 22, 2012 That'll make the drive ignore what's in the firmware and build a new write strategy 'on the fly'. Be careful though... sometimes it works, sometimes it doesn't. When burning with the drive configured like that, burns are less consistent and because it's a drive setting (and nothing to do with the software you're using), it's applied to every burn you do and on all media. Link to comment Share on other sites More sharing options...
MSIGuy Posted October 23, 2012 Author Share Posted October 23, 2012 That's good information to know! I'll have to get to the bottom of what's causing problems then, hopefully after getting a couple BD-RE DL's, and when I have more time. Link to comment Share on other sites More sharing options...
Recommended Posts