Thodoris Posted October 26, 2012 Posted October 26, 2012 Hi , i am not experienced in BDR burnings and this was the first time i got such a problem. i didnt anything different than my other successful burnings ... i saw similar posts from the past about this problem but i think its better to ask about my personal case ... i use JVC-Taiyo BDRs , till now without any problem. this is the log : ----------------------------------------------------------------------------------------------------------------------------- 07:41:37 ImgBurn Version 2.5.6.0 started! I 07:41:37 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 07:41:37 Total Physical Memory: 3,136,084 KB - Available: 2,703,848 KB I 07:41:37 Initialising SPTI... I 07:41:37 Searching for SCSI / ATAPI devices... I 07:41:37 -> Drive 1 - Info: HL-DT-ST BD-RE BH10LS38 1.00-A2 (G:) (ATA) I 07:41:37 -> Drive 2 - Info: TSSTcorp CDDVDW SH-222AB SB00 (D:) (ATA) I 07:41:37 Found 1 DVD±RW/RAM and 1 BD-RE! I 07:43:28 Operation Started! I 07:43:28 Building Image Tree... I 07:43:28 Calculating Totals... I 07:43:28 Preparing Image... I 07:43:29 Contents: 1,044 Files, 107 Folders I 07:43:29 Content Type: Data I 07:43:29 Data Type: MODE1/2048 I 07:43:29 File System(s): UDF (1.02) I 07:43:29 Volume Label: FRJBR015 I 07:43:29 Size: 23,949,037,318 bytes I 07:43:29 Sectors: 11,694,420 I 07:43:29 Image Size: 23,953,342,464 bytes I 07:43:29 Image Sectors: 11,695,968 I 07:43:38 Operation Successfully Completed! - Duration: 00:00:10 I 07:43:38 Operation Started! I 07:43:38 Source File: -==/\/[bUILD IMAGE]\/\==- I 07:43:38 Source File Sectors: 11,695,968 (MODE1/2048) I 07:43:38 Source File Size: 23,953,342,464 bytes I 07:43:38 Source File Volume Identifier: FRJBR015 I 07:43:38 Source File Volume Set Identifier: 415A3D6500B27756 I 07:43:38 Source File Application Identifier: ImgBurn v2.5.6.0 I 07:43:38 Source File Implementation Identifier: ImgBurn I 07:43:38 Source File File System(s): UDF (1.02) I 07:43:38 Destination Device: [0:1:0] HL-DT-ST BD-RE BH10LS38 1.00 (G:) (ATA) I 07:43:38 Destination Media Type: BD-R (Disc ID: TYG-BD-Y03-001) I 07:43:38 Destination Media Supported Write Speeds: 2x, 4x I 07:43:38 Destination Media Sectors: 12,219,392 I 07:43:38 Write Mode: BD I 07:43:38 Write Type: DAO I 07:43:38 Write Speed: 2x I 07:43:38 BD-R Verify Not Required: Yes I 07:43:38 Link Size: Auto I 07:43:38 Lock Volume: Yes I 07:43:38 Test Mode: No I 07:43:38 OPC: No I 07:43:38 BURN-Proof: Enabled I 07:43:38 Write Speed Successfully Set! - Effective: 8,991 KB/s (2x) I 07:43:53 Filling Buffer... (40 MB) I 07:43:54 Writing LeadIn... I 07:43:55 Writing Session 1 of 1... (1 Track, LBA: 0 - 11695967) I 07:43:55 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 11695967) I 08:28:27 Synchronising Cache... I 08:28:34 Closing Track... I 08:28:35 Finalising Disc... W 08:28:41 Finalise Disc Failed! - Reason: Cannot Write Medium - Incompatible Format W 08:28:41 Retrying (1 of 3)... W 08:28:41 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 08:28:41 Retrying (2 of 3)... W 08:28:41 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 08:28:41 Retrying (3 of 3)... W 08:28:41 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 08:31:26 Retrying (4)... W 08:31:26 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 08:31:27 Retrying (5)... W 08:31:27 Retry Failed - Reason: Cannot Write Medium - Incompatible Format I 08:31:29 Exporting Graph Data... I 08:31:29 Graph Data File: C:\Documents and Settings\Administrator\Application Data\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_BH10LS38_1.00_FRIDAY-OCTOBER-26-2012_7-43_AM_TYG-BD-Y03-001_2x.ibg I 08:31:29 Export Successfully Completed! I 08:31:29 Operation Successfully Completed! - Duration: 00:47:50 I 08:31:29 Average Write Rate: 8,754 KB/s (1.9x) - Maximum Write Rate: 9,137 KB/s (2.0x) I 08:31:29 Cycling Tray before Verify... W 08:31:38 Waiting for device to become ready... W 08:31:52 Device Not Ready - Unable to Recover TOC W 08:31:52 Retrying (1 of 3)... I 08:31:52 Cycling Tray before Verify... W 08:32:01 Waiting for device to become ready... W 08:32:16 Retry Failed - Reason: Unable to Recover TOC W 08:32:16 Retrying (2 of 3)... I 08:32:16 Cycling Tray before Verify... W 08:32:25 Waiting for device to become ready... W 08:32:39 Retry Failed - Reason: Unable to Recover TOC W 08:32:39 Retrying (3 of 3)... I 08:32:39 Cycling Tray before Verify... W 08:32:48 Waiting for device to become ready... I 08:32:49 Abort Request Acknowledged E 08:32:49 Device Not Ready - Reason: Logical Unit is in process of becoming ready E 08:32:49 Operation Aborted! I 08:33:12 Close Request Acknowledged I 08:33:12 Closing Down... I 08:33:12 Shutting down SPTI... I 08:33:12 ImgBurn closed! ----------------------------------------------------------------------------------------------------------------------------- u think this is an occasional "normal" problem on finalizing or something i have to change ? any opinions ? thanx.
LIGHTNING UK! Posted October 26, 2012 Posted October 26, 2012 Firstly, update ImgBurn. Then you should update the firmware on your drive. http://www.firmwarehq.com/LG/BH10LS38/files.html I believe the discs you're using are the cheaper LTH type rather than the traditional HTL ones. Drives do have more of a problem burning those. You may also find the drive does a better job if you burn at 4x rather than 2x.
Recommended Posts