scottishdude Posted October 28, 2012 Posted October 28, 2012 hi folks, previously had windows 7 on my pc and burned backups for my xbox with no problems with verb singapores, but since ave installed windows 8 ave had a few coasters, basically imgburn looks like it times out, the burn time becomes unknown and then doesn't complete, just a don't really want to have to have dual boot just to burn back ups, was on the #c4e irc, and few of the guys said it takes a few burns to get smartburn to work properly, the first one a burned last night was fine and ave had to coasters today and dont really want to waste my discs till there is a solution to the error. kind regards stevo,
LIGHTNING UK! Posted October 28, 2012 Posted October 28, 2012 If it just seems to stop doing anything (with no errors in the log window), it's because it's waiting for an I/O command to finish processing. If that's happening, it'll be due to the drivers installed for the chipset/controller. Right click the drive selection box and hit 'Family Tree'. Close the prompt and then copy+paste everything from the Log window.
scottishdude Posted October 28, 2012 Author Posted October 28, 2012 --------------------------- ImgBurn --------------------------- Device: [1:0:0] ATAPI iHAS124 B AL0S (G:) (SATA) Family Tree: -> ACPI x64-based PC -> Microsoft ACPI-Compliant System -> PCI Express Root Complex -> Intel® 5520/5500/X58 I/O Hub PCI Express Root Port 1 - 3408 (VEN_8086&DEV_3408 - Intel - pci - v6.2.9200.16384) -> Standard SATA AHCI Controller (VEN_1B4B&DEV_9123 - Marvell - storahci - v6.2.9200.16384) -> CD-ROM Drive (ATAPI iHAS124 (Bus Number 1, Target Id 0, LUN 0) --------------------------- OK ---------------------------
LIGHTNING UK! Posted October 28, 2012 Posted October 28, 2012 Get the drive off the Marvell controller and onto the proper onboard chipset one.
scottishdude Posted October 28, 2012 Author Posted October 28, 2012 cool al open it up, didn't realize it was on the marvel controller
scottishdude Posted October 28, 2012 Author Posted October 28, 2012 is this better then fella --------------------------- ImgBurn --------------------------- Device: [0:0:0] ATAPI iHAS124 B AL0S (E:) (ATAPI) Family Tree: -> ACPI x64-based PC -> Microsoft ACPI-Compliant System -> PCI Express Root Complex -> Intel® ICH8R/ICH9R/ICH10R/DO/PCH SATA RAID Controller (VEN_8086&DEV_2822 - Intel - iaStor) -> CD-ROM Drive (ATAPI iHAS124 (3) --------------------------- OK ---------------------------
LIGHTNING UK! Posted October 28, 2012 Posted October 28, 2012 Yes. Which driver have you installed for the Intel one? I can't remember if the Intel Rapid Storage Technology drivers work on ICH8/9/10... if they do, try putting v10.8 on.
Adrianvdh Posted October 28, 2012 Posted October 28, 2012 I don't think your CPU, Motherboard. Graphics card...etc drivers support Windows 8 Try and look drivers that support Windows 8 (windows 8 is a new OS to the community and not a lot of people have made there programs support Windows 8 (that secludes ImgBurn)
Recommended Posts