HipsterHD Posted November 7, 2012 Share Posted November 7, 2012 (edited) Why am I getting this error, I have burned at least 20 good Dual Layer DVD's before and just burned Halo 4 Disk 1 without any problems but went to burn Halo 4 Disk 2 and received the following ImgBurn error and log; Error; Close Track Failed! Device: [3:0:0] ATAPI iHAS124 B AL0S (D:) (ATA) Reason: Power Calibration Area is Full Log; I 14:47:07 ImgBurn Version 2.5.7.0 started! I 14:47:07 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7601 : Service Pack 1) I 14:47:07 Total Physical Memory: 2,061,560 KB - Available: 960,540 KB I 14:47:07 Initialising SPTI... I 14:47:07 Searching for SCSI / ATAPI devices... I 14:47:14 -> Drive 1 - Info: ATAPI iHAS124 B AL0S (D:) (ATA) I 14:47:14 -> Drive 2 - Info: MagicISO Virtual DVD-ROM 1.0A (G:) (Unknown) I 14:47:14 Found 1 DVD-ROM and 1 DVD±RW/RAM! I 14:50:31 Operation Started! I 14:50:31 Source File: C:\Users\Sean\Desktop\Halo 4 - 2 Disks.Xbox360\Disk 1\Disk 1.dvd I 14:50:31 Source File Sectors: 4,267,015 (MODE1/2048) I 14:50:32 Source File Size: 8,738,846,720 bytes I 14:50:32 Source File Volume Identifier: DVD_ROM I 14:50:32 Source File Volume Set Identifier: 8a46c000MS UDFBridge I 14:50:32 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 14:50:32 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 14:50:32 Source File File System(s): ISO9660, UDF (1.50) I 14:50:32 Destination Device: [3:0:0] ATAPI iHAS124 B AL0S (D:) (ATA) I 14:50:32 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) I 14:50:32 Destination Media Supported Write Speeds: 4x, 6x, 8x I 14:50:32 Destination Media Sectors: 4,267,040 I 14:50:32 Write Mode: DVD I 14:50:32 Write Type: DAO I 14:50:32 Write Speed: MAX I 14:50:32 DVD+R DL Reserve Track: No I 14:50:32 Link Size: Auto I 14:50:32 Lock Volume: Yes I 14:50:32 Test Mode: No I 14:50:32 OPC: No I 14:50:32 BURN-Proof: Enabled I 14:50:32 Write Speed Successfully Set! - Effective: 11,080 KB/s (8x) I 14:50:32 Book Type Setting: DVD-ROM I 14:50:32 Advanced Settings - Force HT: No, Online HT: Yes, OverSpeed: No, SmartBurn: Yes I 14:50:49 Optimal L0 Data Zone Capacity: 2,133,520 I 14:50:49 Optimal L0 Data Zone Method: Copied From Original Disc I 14:50:49 Set L0 Data Zone Capacity Succeeded! I 14:50:51 Filling Buffer... (80 MB) I 14:50:52 Writing LeadIn... I 14:51:56 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 14:51:56 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 14:51:56 Writing Layer 0... (LBA: 0 - 2133519) I 15:01:02 Writing Layer 1... (LBA: 2133520 - 4267014) I 15:10:18 Synchronising Cache... I 15:10:26 Closing Track... I 15:10:27 Finalising Disc... I 15:11:00 Exporting Graph Data... I 15:11:00 Graph Data File: C:\Users\Sean\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS124_B_AL0S_WEDNESDAY-NOVEMBER-07-2012_2-50_PM_RITEK-S04-66_MAX.ibg I 15:11:00 Export Successfully Completed! I 15:11:00 Operation Successfully Completed! - Duration: 00:20:28 I 15:11:00 Average Write Rate: 7,744 KB/s (5.6x) - Maximum Write Rate: 11,169 KB/s (8.1x) I 15:13:36 Operation Started! I 15:13:36 Source File: C:\Users\Sean\Desktop\Halo 4 - 2 Disks.Xbox360\Disk 2\Disk 2.dvd I 15:13:36 Source File Sectors: 4,267,015 (MODE1/2048) I 15:13:36 Source File Size: 8,738,846,720 bytes I 15:13:36 Source File Volume Identifier: DVD_ROM I 15:13:36 Source File Volume Set Identifier: 8a46c000MS UDFBridge I 15:13:36 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 15:13:36 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 15:13:36 Source File File System(s): ISO9660, UDF (1.50) I 15:13:36 Destination Device: [3:0:0] ATAPI iHAS124 B AL0S (D:) (ATA) I 15:13:36 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) I 15:13:36 Destination Media Supported Write Speeds: 4x, 6x, 8x I 15:13:36 Destination Media Sectors: 4,267,040 I 15:13:36 Write Mode: DVD I 15:13:36 Write Type: DAO I 15:13:36 Write Speed: MAX I 15:13:36 DVD+R DL Reserve Track: No I 15:13:36 Link Size: Auto I 15:13:36 Lock Volume: Yes I 15:13:36 Test Mode: No I 15:13:36 OPC: No I 15:13:36 BURN-Proof: Enabled I 15:13:36 Write Speed Successfully Set! - Effective: 11,080 KB/s (8x) I 15:13:36 Book Type Setting: DVD-ROM I 15:13:36 Advanced Settings - Force HT: No, Online HT: Yes, OverSpeed: No, SmartBurn: Yes I 15:13:39 Optimal L0 Data Zone Capacity: 2,133,520 I 15:13:39 Optimal L0 Data Zone Method: Copied From Original Disc I 15:13:39 Set L0 Data Zone Capacity Succeeded! I 15:13:39 Filling Buffer... (80 MB) I 15:13:40 Writing LeadIn... I 15:14:49 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 15:14:49 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 15:14:49 Writing Layer 0... (LBA: 0 - 2133519) I 15:23:55 Writing Layer 1... (LBA: 2133520 - 4267014) I 15:33:08 Synchronising Cache... I 15:33:31 Closing Track... W 15:34:30 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Power Calibration Area Is Full W 15:34:30 Close Track Failed! - Reason: Power Calibration Area Is Full W 15:34:30 Retrying (1 of 3)... W 15:34:47 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Power Calibration Area Is Full W 15:34:47 Retry Failed - Reason: Power Calibration Area Is Full W 15:34:47 Retrying (2 of 3)... W 15:35:07 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Power Calibration Area Is Full W 15:35:07 Retry Failed - Reason: Power Calibration Area Is Full W 15:35:07 Retrying (3 of 3)... W 15:35:28 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Power Calibration Area Is Full W 15:35:28 Retry Failed - Reason: Power Calibration Area Is Full W 15:35:31 Retrying (4)... W 15:35:49 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Power Calibration Area Is Full W 15:35:49 Retry Failed - Reason: Power Calibration Area Is Full I 15:35:51 Finalising Disc... W 15:35:51 Finalise Disc Failed! - Reason: Session Fixation Error - Incomplete Track in Session W 15:35:51 Retrying (1 of 3)... W 15:36:07 Retry Failed - Reason: Session Fixation Error - Incomplete Track in Session W 15:36:07 Retrying (2 of 3)... W 15:36:28 Retry Failed - Reason: Session Fixation Error - Incomplete Track in Session W 15:36:28 Retrying (3 of 3)... W 15:36:45 Retry Failed - Reason: Session Fixation Error - Incomplete Track in Session I 15:37:06 Exporting Graph Data... I 15:37:06 Graph Data File: C:\Users\Sean\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS124_B_AL0S_WEDNESDAY-NOVEMBER-07-2012_3-13_PM_RITEK-S04-66_MAX.ibg I 15:37:06 Export Successfully Completed! I 15:37:06 Operation Successfully Completed! - Duration: 00:23:30 I 15:37:06 Average Write Rate: 7,765 KB/s (5.6x) - Maximum Write Rate: 11,176 KB/s (8.1x) I 15:43:05 Operation Started! I 15:43:05 Source File: C:\Users\Sean\Desktop\Halo 4 - 2 Disks.Xbox360\Disk 2\Disk 2.dvd I 15:43:05 Source File Sectors: 4,267,015 (MODE1/2048) I 15:43:05 Source File Size: 8,738,846,720 bytes I 15:43:05 Source File Volume Identifier: DVD_ROM I 15:43:05 Source File Volume Set Identifier: 8a46c000MS UDFBridge I 15:43:05 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 15:43:05 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 15:43:05 Source File File System(s): ISO9660, UDF (1.50) I 15:43:05 Destination Device: [3:0:0] ATAPI iHAS124 B AL0S (D:) (ATA) I 15:43:05 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) I 15:43:05 Destination Media Supported Write Speeds: 4x, 6x, 8x I 15:43:05 Destination Media Sectors: 4,267,040 I 15:43:05 Write Mode: DVD I 15:43:05 Write Type: DAO I 15:43:05 Write Speed: MAX I 15:43:05 DVD+R DL Reserve Track: No I 15:43:05 Link Size: Auto I 15:43:05 Lock Volume: Yes I 15:43:05 Test Mode: No I 15:43:05 OPC: No I 15:43:05 BURN-Proof: Enabled I 15:43:05 Write Speed Successfully Set! - Effective: 11,080 KB/s (8x) I 15:43:05 Book Type Setting: DVD-ROM I 15:43:05 Advanced Settings - Force HT: No, Online HT: Yes, OverSpeed: No, SmartBurn: Yes I 15:43:05 Optimal L0 Data Zone Capacity: 2,133,520 I 15:43:05 Optimal L0 Data Zone Method: Copied From Original Disc I 15:43:05 Set L0 Data Zone Capacity Succeeded! I 15:43:05 Filling Buffer... (80 MB) I 15:43:07 Writing LeadIn... I 15:44:08 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 15:44:08 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 15:44:08 Writing Layer 0... (LBA: 0 - 2133519) I 15:53:15 Writing Layer 1... (LBA: 2133520 - 4267014) I 16:02:31 Synchronising Cache... I 16:03:22 Closing Track... W 16:03:39 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Power Calibration Area Is Full W 16:03:39 Close Track Failed! - Reason: Power Calibration Area Is Full W 16:03:39 Retrying (1 of 3)... W 16:03:53 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Power Calibration Area Is Full W 16:03:53 Retry Failed - Reason: Power Calibration Area Is Full W 16:03:53 Retrying (2 of 3)... W 16:04:10 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Power Calibration Area Is Full W 16:04:10 Retry Failed - Reason: Power Calibration Area Is Full W 16:04:10 Retrying (3 of 3)... W 16:04:24 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Power Calibration Area Is Full W 16:04:24 Retry Failed - Reason: Power Calibration Area Is Full W 16:04:26 Retrying (4)... W 16:04:40 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Power Calibration Area Is Full W 16:04:40 Retry Failed - Reason: Power Calibration Area Is Full E 16:05:30 Close Track Failed! - Reason: Power Calibration Area Is Full I 16:05:30 Closing Track (Last Attempt!)... E 16:05:47 Close Track Failed! - Reason: Power Calibration Area Is Full I 16:05:47 Finalising Disc... W 16:05:47 Finalise Disc Failed! - Reason: Session Fixation Error - Incomplete Track in Session W 16:05:47 Retrying (1 of 3)... W 16:06:01 Retry Failed - Reason: Session Fixation Error - Incomplete Track in Session W 16:06:01 Retrying (2 of 3)... W 16:06:19 Retry Failed - Reason: Session Fixation Error - Incomplete Track in Session W 16:06:19 Retrying (3 of 3)... W 16:06:33 Retry Failed - Reason: Session Fixation Error - Incomplete Track in Session I 16:10:33 Exporting Graph Data... I 16:10:33 Graph Data File: C:\Users\Sean\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS124_B_AL0S_WEDNESDAY-NOVEMBER-07-2012_3-43_PM_RITEK-S04-66_MAX.ibg I 16:10:33 Export Successfully Completed! I 16:10:33 Operation Successfully Completed! - Duration: 00:27:27 I 16:10:33 Average Write Rate: 7,744 KB/s (5.6x) - Maximum Write Rate: 11,176 KB/s (8.1x) I 16:28:04 Operation Started! I 16:28:04 Source File: C:\Users\Sean\Desktop\Halo 4 - 2 Disks.Xbox360\Disk 2\Disk 2.dvd I 16:28:04 Source File Sectors: 4,267,015 (MODE1/2048) I 16:28:04 Source File Size: 8,738,846,720 bytes I 16:28:04 Source File Volume Identifier: DVD_ROM I 16:28:04 Source File Volume Set Identifier: 8a46c000MS UDFBridge I 16:28:04 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 16:28:04 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 16:28:04 Source File File System(s): ISO9660, UDF (1.50) I 16:28:04 Destination Device: [3:0:0] ATAPI iHAS124 B AL0S (D:) (ATA) I 16:28:04 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) I 16:28:04 Destination Media Supported Write Speeds: 4x, 6x, 8x I 16:28:04 Destination Media Sectors: 4,267,040 I 16:28:04 Write Mode: DVD I 16:28:04 Write Type: DAO I 16:28:04 Write Speed: MAX I 16:28:04 DVD+R DL Reserve Track: No I 16:28:04 Link Size: Auto I 16:28:04 Lock Volume: Yes I 16:28:04 Test Mode: No I 16:28:04 OPC: Yes I 16:28:04 BURN-Proof: Disabled I 16:28:04 Write Speed Successfully Set! - Effective: 11,080 KB/s (8x) I 16:28:04 Book Type Setting: DVD-ROM I 16:28:04 Advanced Settings - Force HT: No, Online HT: Yes, OverSpeed: No, SmartBurn: Yes I 16:29:06 Optimal L0 Data Zone Capacity: 2,133,520 I 16:29:06 Optimal L0 Data Zone Method: Copied From Original Disc I 16:29:06 Set L0 Data Zone Capacity Succeeded! I 16:29:06 Filling Buffer... (80 MB) I 16:29:07 Writing LeadIn... I 16:29:11 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 16:29:11 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 16:29:11 Writing Layer 0... (LBA: 0 - 2133519) I 16:38:18 Writing Layer 1... (LBA: 2133520 - 4267014) I 16:47:32 Synchronising Cache... I 16:48:32 Closing Track... W 16:48:49 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Power Calibration Area Is Full W 16:48:49 Close Track Failed! - Reason: Power Calibration Area Is Full W 16:48:49 Retrying (1 of 3)... W 16:49:04 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Power Calibration Area Is Full W 16:49:04 Retry Failed - Reason: Power Calibration Area Is Full W 16:49:04 Retrying (2 of 3)... W 16:49:21 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Power Calibration Area Is Full W 16:49:21 Retry Failed - Reason: Power Calibration Area Is Full W 16:49:21 Retrying (3 of 3)... W 16:49:35 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Power Calibration Area Is Full W 16:49:35 Retry Failed - Reason: Power Calibration Area Is Full W 16:49:36 Retrying (4)... W 16:49:51 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Power Calibration Area Is Full W 16:49:51 Retry Failed - Reason: Power Calibration Area Is Full E 16:56:59 Close Track Failed! - Reason: Power Calibration Area Is Full I 16:56:59 Closing Track (Last Attempt!)... Edited November 7, 2012 by HipsterHD Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted November 7, 2012 Share Posted November 7, 2012 Overburning onto RITEK-S04-66 at 8x speed? You're brave! Try at a more civilised speed of 4x. Link to comment Share on other sites More sharing options...
HipsterHD Posted November 8, 2012 Author Share Posted November 8, 2012 Overburning onto RITEK-S04-66 at 8x speed? You're brave! Try at a more civilised speed of 4x. I love the humour, thanks though I will be sure to try it. Link to comment Share on other sites More sharing options...
Recommended Posts