mightymouse Posted November 9, 2012 Posted November 9, 2012 i am copying over an iso of a backup of a game and i get this error please help i am using vervatim discs and copied on 2.4 speed ImgBurn1.log
LIGHTNING UK! Posted November 9, 2012 Posted November 9, 2012 Don't mess with the layer break options, just leave it on 'Calculate Optimal'. The correct layer break position is read from the .DVD file.
mightymouse Posted November 9, 2012 Author Posted November 9, 2012 i have just copied the disc on optimal and this is what i got I 16:22:25 ImgBurn Version 2.5.5.0 started! I 16:22:25 Microsoft Windows 7 Ultimate Edition (6.1, Build 7601 : Service Pack 1) I 16:22:25 Total Physical Memory: 1,047,352 KB - Available: 576,996 KB I 16:22:25 Initialising SPTI... I 16:22:25 Searching for SCSI / ATAPI devices... I 16:22:25 -> Drive 1 - Info: _NEC DVD_RW ND-3530A 2.01 (D:) (ATA) I 16:22:25 -> Drive 2 - Info: ATAPI iHAS524 B AL2A (E:) (RAID) I 16:22:25 Found 1 DVD±RW and 1 DVD±RW/RAM! I 16:23:28 Operation Started! I 16:23:28 Source File: C:\Users\joker2\Desktop\busted\iso.dvd I 16:23:28 Source File Sectors: 4,267,015 (MODE1/2048) I 16:23:28 Source File Size: 8,738,846,720 bytes I 16:23:28 Source File Volume Identifier: DVD_ROM I 16:23:28 Source File Volume Set Identifier: b4b08000MS UDFBridge I 16:23:28 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 16:23:28 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 16:23:28 Source File File System(s): ISO9660, UDF (1.50) I 16:23:28 Destination Device: [2:0:0] ATAPI iHAS524 B AL2A (E:) (RAID) I 16:23:28 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x, 6x, 8x) I 16:23:28 Destination Media Sectors: 4,267,040 I 16:23:28 Write Mode: DVD I 16:23:28 Write Type: DAO I 16:23:28 Write Speed: 2.4x I 16:23:28 Link Size: Auto I 16:23:28 Lock Volume: Yes I 16:23:28 Test Mode: No I 16:23:28 OPC: No I 16:23:28 BURN-Proof: Enabled I 16:23:28 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x) I 16:23:28 Book Type Setting: DVD-ROM I 16:23:28 Advanced Settings - Force HT: Yes, Online HT: Yes, OverSpeed: No, SmartBurn: Yes W 16:23:46 User specified layer break position is such that L0 < L1. W 16:23:46 Image Size: 4,267,015 W 16:23:46 User Specified L0 Sectors: 1,913,760 W 16:23:46 Calculated L1 Sectors: 2,353,255 I 16:23:46 User Specified L0 Data Zone Capacity: 1,913,760 I 16:24:19 Set L0 Data Zone Capacity Succeeded! I 16:24:21 Filling Buffer... (40 MB) I 16:24:22 Writing LeadIn... I 16:24:24 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 16:24:24 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 16:24:24 Writing Layer 0... (LBA: 0 - 1913759) I 16:44:04 Writing Layer 1... (LBA: 1913760 - 4267014) W 17:03:56 Failed to Write Sectors 3827520 - 3827551 - Reason: Logical Block Address out of Range W 17:03:56 Retrying (1 of 20)... W 17:03:56 Retry Failed - Reason: Logical Block Address out of Range W 17:03:56 Retrying (2 of 20)... W 17:03:56 Retry Failed - Reason: Logical Block Address out of Range W 17:03:57 Retrying (3 of 20)... W 17:03:57 Retry Failed - Reason: Logical Block Address out of Range W 17:03:57 Retrying (4 of 20)... W 17:03:57 Retry Failed - Reason: Logical Block Address out of Range W 17:03:57 Retrying (5 of 20)...
LIGHTNING UK! Posted November 9, 2012 Posted November 9, 2012 It still looks like you're trying to use a 'User Specified' layer break position. The option you're looking for is on the 'Write' tab within the settings. Oh and install the current version of ImgBurn too.
mightymouse Posted November 9, 2012 Author Posted November 9, 2012 i have updated and this time it completed and failed on the verification. I 17:31:12 ImgBurn Version 2.5.7.0 started! I 17:31:12 Microsoft Windows 7 Ultimate Edition (6.1, Build 7601 : Service Pack 1) I 17:31:12 Total Physical Memory: 1,047,352 KB - Available: 527,360 KB I 17:31:12 Initialising SPTI... I 17:31:12 Searching for SCSI / ATAPI devices... I 17:31:19 -> Drive 1 - Info: _NEC DVD_RW ND-3530A 2.01 (D:) (ATA) I 17:31:19 -> Drive 2 - Info: ATAPI iHAS524 B AL2A (E:) (RAID) I 17:31:19 Found 1 DVD±RW and 1 DVD±RW/RAM! I 17:32:54 Operation Started! I 17:32:54 Source File: C:\Users\joker2\Desktop\busted\iso.dvd I 17:32:54 Source File Sectors: 4,267,015 (MODE1/2048) I 17:32:54 Source File Size: 8,738,846,720 bytes I 17:32:54 Source File Volume Identifier: DVD_ROM I 17:32:54 Source File Volume Set Identifier: b4b08000MS UDFBridge I 17:32:54 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 17:32:54 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 17:32:54 Source File File System(s): ISO9660, UDF (1.50) I 17:32:54 Destination Device: [2:0:0] ATAPI iHAS524 B AL2A (E:) (RAID) I 17:32:54 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) I 17:32:54 Destination Media Supported Write Speeds: 2.4x, 4x, 6x, 8x I 17:32:54 Destination Media Sectors: 4,267,040 I 17:32:54 Write Mode: DVD I 17:32:54 Write Type: DAO I 17:32:54 Write Speed: 2.4x I 17:32:54 DVD+R DL Reserve Track: No I 17:32:54 Link Size: Auto I 17:32:54 Lock Volume: Yes I 17:32:54 Test Mode: No I 17:32:54 OPC: No I 17:32:54 BURN-Proof: Enabled I 17:32:54 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x) I 17:32:54 Book Type Setting: DVD-ROM I 17:32:54 Advanced Settings - Force HT: Yes, Online HT: Yes, OverSpeed: No, SmartBurn: Yes I 17:32:54 Optimal L0 Data Zone Capacity: 2,133,520 I 17:32:54 Optimal L0 Data Zone Method: Copied From Original Disc I 17:32:54 Set L0 Data Zone Capacity Succeeded! I 17:32:56 Filling Buffer... (40 MB) I 17:32:57 Writing LeadIn... I 17:33:33 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 17:33:33 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 17:33:33 Writing Layer 0... (LBA: 0 - 2133519) I 17:55:29 Writing Layer 1... (LBA: 2133520 - 4267014) I 18:17:37 Synchronising Cache... I 18:17:42 Closing Track... I 18:17:43 Finalising Disc... I 18:20:18 Exporting Graph Data... I 18:20:18 Graph Data File: C:\Users\joker2\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS524_B_AL2A_09-NOVEMBER-2012_17-32_MKM-003-00_2.4x.ibg I 18:20:18 Export Successfully Completed! I 18:20:18 Operation Successfully Completed! - Duration: 00:47:23 I 18:20:18 Average Write Rate: 3,228 KB/s (2.3x) - Maximum Write Rate: 3,391 KB/s (2.4x) I 18:20:18 Cycling Tray before Verify... W 18:20:25 Waiting for device to become ready... I 18:20:40 Device Ready! I 18:20:41 Operation Started!
LIGHTNING UK! Posted November 9, 2012 Posted November 9, 2012 Your log doesn't show the error. Try burning at 4x and turn 'Online Hypertuning' off. They're what got me decent burns when I was testing things out ages ago.
mightymouse Posted November 9, 2012 Author Posted November 9, 2012 where in the menus is online hypertuning
mightymouse Posted November 9, 2012 Author Posted November 9, 2012 (edited) default overburn set it to overburn or truncate??? Edited November 9, 2012 by mightymouse
LIGHTNING UK! Posted November 9, 2012 Posted November 9, 2012 It's a drive setting and is in the 'Advanced Settings' screen - which you access via one of the three little button/icons down the bottom right of the main 'Write' mode screen - or you can use the eeprom tool. The default overburn setting doesn't apply here. Just leave it alone.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now