Jump to content

same problem as below, layouts dont match burning xgd3 dual layer


Recommended Posts

Posted

i have tried 3 times unsucessfully to burn these games, this has happened since i updated my pc to windows 8, here is the log:

 

I 16:16:00 ImgBurn Version 2.5.7.0 started!

I 16:16:00 Microsoft Windows 8 Professional x64 Edition (6.2, Build 9200)

I 16:16:00 Total Physical Memory: 3,559,116 KB - Available: 1,776,268 KB

I 16:16:00 Initialising SPTI...

I 16:16:00 Searching for SCSI / ATAPI devices...

I 16:16:00 -> Drive 1 - Info: ATAPI iHAS124 B AL0S (I:) (RAID)

I 16:16:00 Found 1 DVD±RW/RAM!

I 16:17:55 Operation Started!

I 16:17:55 Source File: C:\Users\Christopher\Downloads\Newshosting\Forza.Horizon.Region.Free ... zon.XBOX360-X360CLUB.nzb_Hondo\Forza.Horizon.XBOX360-X360CLUB\Forza.Horizon.XBOX360-X360CLUB.dvd

I 16:17:55 Source File Sectors: 4,267,015 (MODE1/2048)

I 16:17:55 Source File Size: 8,738,846,720 bytes

I 16:17:55 Source File Volume Identifier: DVD_ROM

I 16:17:55 Source File Volume Set Identifier: 8ed74000MS UDFBridge

I 16:17:55 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 16:17:55 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 16:17:55 Source File File System(s): ISO9660, UDF (1.50)

I 16:17:55 Destination Device: [0:1:0] ATAPI iHAS124 B AL0S (I:) (RAID)

I 16:17:55 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00)

I 16:17:55 Destination Media Supported Write Speeds: 2.4x

I 16:17:55 Destination Media Sectors: 4,267,040

I 16:17:55 Write Mode: DVD

I 16:17:55 Write Type: DAO

I 16:17:55 Write Speed: 2.4x

I 16:17:55 DVD+R DL Reserve Track: No

I 16:17:55 Link Size: Auto

I 16:17:55 Lock Volume: Yes

I 16:17:55 Test Mode: No

I 16:17:55 OPC: No

I 16:17:55 BURN-Proof: Enabled

I 16:17:55 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x)

I 16:17:55 Book Type Setting: DVD-ROM

I 16:17:55 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes

I 16:17:55 Optimal L0 Data Zone Capacity: 2,133,520

I 16:17:55 Optimal L0 Data Zone Method: Copied From Original Disc

I 16:17:55 Set L0 Data Zone Capacity Succeeded!

I 16:17:55 Filling Buffer... (80 MB)

I 16:17:56 Writing LeadIn...

I 16:18:33 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014)

I 16:18:33 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)

I 16:18:33 Writing Layer 0... (LBA: 0 - 2133519)

I 16:24:31 Writing Layer 1... (LBA: 2133520 - 4267014)

I 16:30:28 Synchronising Cache...

I 16:30:29 Closing Track...

I 16:30:31 Finalising Disc...

I 16:36:22 Exporting Graph Data...

I 16:36:22 Graph Data File: C:\Users\Christopher\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS124_B_AL0S_FRIDAY-NOVEMBER-30-2012_4-17_PM_MKM-001-00_2.4x.ibg

I 16:36:22 Export Successfully Completed!

I 16:36:22 Operation Successfully Completed! - Duration: 00:18:27

I 16:36:22 Average Write Rate: 11,952 KB/s (8.6x) - Maximum Write Rate: 12,395 KB/s (8.9x)

I 16:36:22 Cycling Tray before Verify...

I 16:36:27 Device Ready!

E 16:36:28 CompareImageFileLayouts Failed! - Session Count Not Equal (1/0)

E 16:36:28 Verify Failed! - Reason: Layouts do not match.

 

 

here is the info on the right when switched to read only:

 

ATAPI iHAS124 B AL0S (RAID)

Current Profile: DVD+R DL

 

Disc Information:

Status: Complete

State of Last Session: Complete

Erasable: No

Sessions: 1

Sectors: 576

Size: 1,179,648 bytes

Time: 00:09:51 (MM:SS:FF)

Supported Read Speeds: 2.4x, 4x, 6x, 8x

Current Read Speed: 6x

 

File System Information:

Sectors: 25,063

Size: 51,329,024 bytes

Time: 05:36:13 (MM:SS:FF)

 

TOC Information:

Session 1... (LBA: 0)

-> Track 01 (Mode 1, LBA: 0 - 575)

-> LeadOut (LBA: 576)

 

Track Information:

Session 1...

-> Track 01 (LTSA: 0, LTS: 576, LRA: 0)

 

Disc Control Blocks Information:

ATAPI

 

Physical Format Information (ADIP - L0):

Disc ID: MKM-001-00

Book Type: DVD+R DL

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 16,580,607

Last Physical Sector in Layer 0: 2,283,519

 

Physical Format Information (ADIP - L1):

Disc ID: MKM-001-00

Book Type: DVD+R DL

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 16,580,607

Last Physical Sector in Layer 0: 2,283,519

 

Physical Format Information (Last Recorded - L0):

Disc ID: MKM-001-00

Book Type: DVD-ROM

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 197,183

Last Physical Sector in Layer 0: 197,183

 

Physical Format Information (Last Recorded - L1):

Disc ID: MKM-001-00

Book Type: DVD-ROM

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 197,183

Last Physical Sector in Layer 0: 197,183

 

Layer Information:

Layer 0 Sectors: 576 (100%)

Layer 1 Sectors: 0 (0%)

 

this is the family tree info:

I 16:58:26 Family Tree:

I 16:58:26 -> ACPI x64-based PC

I 16:58:26 -> Microsoft ACPI-Compliant System

I 16:58:26 -> PCI bus

I 16:58:26 -> AMD AHCI Compatible RAID Controller (VEN_1022&DEV_7802 - AMD - amdsbs)

I 16:58:26 -> CD-ROM Drive (ATAPI iHAS124 B SCSI CdRom Device) (Bus Number 0, Target Id 1, LUN 0)

 

drive is flashed with imax firmware to burn the games and i have never had a problem before, this just started happening when i upgraged to windows 8,

the help is appreciated!!! thanks!!!!!

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.