No Seek Complete error

[Giangi]

Hi!

 

After many DVD-DL well written, today I have opened a new pack from "Ridata" (disk manufacturer is Ritek) and I have toasted the first three... first I was burning an iso image but then I have tried burning directly without saving it as iso first.

 

My writer is maybe a bit old, is a NEC 3540 with a modified firmware (never had trouble with it before) from http://liggydee.cdfreaks.com/page/

 

The log file is attached...

 

In the auto speed list these DVD are saved as RITEK-S04-66

 

Thanks and ciao!

Giangi

ImgBurn.log

[Giangi]

I have managed to fallback to the original Nec's firmware v1.04 but nothing changed: I trashed one more DVD... It looks like my drive doesn't like this media at all!!

I have tried on a HP laptop using a Samsumg drive: it has been burned perfectly! ...only difference is that on my Nec the available speeds are: 4x 6x and 8x while on the Samsung are: 3x 4x and 6x! I have burned at 4x speed

With modified Nec's firmware

Destination Device: [0:0:0] _NEC DVD_RW ND-3540A 1.WB (Z:) (ATA)

Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66)

Destination Media Supported Write Speeds: 4x; 6x; 8x

With original Nec's firmware

Destination Device: [0:0:0] _NEC DVD_RW ND-3540A 1.04 (Z:) (ATA)

Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66)

Destination Media Supported Write Speeds: 4x; 6x; 8x

O the HP with Samsun drive

Destination Device: [0:1:0] hp CDDVDW TS-L633N 0300 (Z:) (ATAPI)

Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66)

Destination Media Supported Write Speeds: 3x; 4x; 6x

 

...but the worst thing is that the DVD burned on the Samsung is not readable on my Nec!!! On the compatibility list my Nec should support 8x speed... http://www.ridatausa.com/Portals/0/CompChart/DVDDL/DVDplusR_DL_Compatibility_at_DVD_Burner_05_05_2010_1.pdf

Edited December 2, 2012 by Giangi

[spinningwheel]

http://forum.imgburn.com/index.php?showtopic=8000

[LIGHTNING UK!]

What MID were the disc you've written ok in the past?

 

Were they RICOH instead of RITEK? If your drive won't burn the RITEK ones, you'll have to go back to what you used before - or go with the tried and tested Verbatims as mentioned above.

[Giangi]

What MID were the disc you've written ok in the past?

Were they RICOH instead of RITEK?

Yes, most of them were RICOH... actually only now, after many years!, I have learned the difference... I guess my device is too old for these new 8x disks... A friend of mine has a not used burner that will give to me for a test, he doesn't remember the brand.

Yes, next time I'll take much more care of the real manufacturer...

Thank you for teaching me something new!

Ciao, Giangi

Edited December 4, 2012 by Giangi

[Giangi]

I have, drastically , solved my problem: I have replaced the old NEC writer with a new Samsung SH-224BB and I have burned these RITEK media succesfully!

 

Ciao, Giangi