DARKFiB3R Posted December 11, 2012 Posted December 11, 2012 This has started happening this morning (4 discs so far). As far as I know, nothing has changed with my system since the last time I burnt this file, which was quite recently. It's an xbox 360 rip that I have burned on multiple occations previously. Drive is flashed with burner max firmware, iso is patched with abgx360, Windows install is up to date. Not sure what other info is relevent. Here's the log... I 11:30:44 ImgBurn Version 2.5.7.0 started!I 11:30:44 Microsoft Windows 7 Ultimate Edition (6.1, Build 7601 : Service Pack 1) I 11:30:44 Total Physical Memory: 3,144,888 KB - Available: 1,638,184 KB I 11:30:44 Initialising SPTI... I 11:30:44 Searching for SCSI / ATAPI devices... I 11:30:45 -> Drive 1 - Info: ATAPI iHAS524 B AL2A (J:) (RAID) I 11:30:45 Found 1 DVD±RW/RAM! I 11:32:07 Device: [0:0:0] ATAPI iHAS524 B AL2A (J:) (RAID) I 11:32:07 Family Tree: I 11:32:07 -> ACPI x86-based PC I 11:32:07 -> Microsoft ACPI-Compliant System I 11:32:07 -> PCI bus I 11:32:07 -> Intel® ICH8 Family PCI Express Root Port 5 - 2847 (VEN_8086&DEV_2847 - Intel - pci) I 11:32:07 -> JMicron JMB36X Controller (VEN_197B&DEV_2363 - JMicron - JRAID) I 11:32:07 -> CD-ROM Drive (ATAPI iHAS524 B SCSI CdRom Device) (Bus Number 0, Target ID 0, LUN 0) I 11:32:26 Operation Started! I 11:32:26 Source File: K:\X360.dvd I 11:32:26 Source File Sectors: 4,267,015 (MODE1/2048) I 11:32:26 Source File Size: 8,738,846,720 bytes I 11:32:26 Source File Volume Identifier: DVD_ROM I 11:32:26 Source File Volume Set Identifier: b6664000MS UDFBridge I 11:32:26 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 11:32:26 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 11:32:26 Source File File System(s): ISO9660, UDF (1.50) I 11:32:26 Destination Device: [0:0:0] ATAPI iHAS524 B AL2A (J:) (RAID) I 11:32:26 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) I 11:32:26 Destination Media Supported Write Speeds: 2.4x, 4x, 6x, 8x I 11:32:26 Destination Media Sectors: 4,267,040 I 11:32:26 Write Mode: DVD I 11:32:26 Write Type: DAO I 11:32:26 Write Speed: 4x I 11:32:26 DVD+R DL Reserve Track: No I 11:32:26 Link Size: Auto I 11:32:26 Lock Volume: Yes I 11:32:26 Test Mode: No I 11:32:26 OPC: No I 11:32:26 BURN-Proof: Enabled I 11:32:26 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x) I 11:32:26 Book Type Setting: DVD-ROM I 11:32:26 Advanced Settings - Force HT: Yes, Online HT: No, OverSpeed: No, SmartBurn: Yes I 11:32:26 Optimal L0 Data Zone Capacity: 2,133,520 I 11:32:26 Optimal L0 Data Zone Method: Copied From Original Disc I 11:32:26 Set L0 Data Zone Capacity Succeeded! I 11:32:27 Filling Buffer... (40 MB) I 11:32:27 Writing LeadIn... I 11:32:58 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 11:32:58 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 11:32:58 Writing Layer 0... (LBA: 0 - 2133519) W 11:33:15 Failed to Write Sectors 42656 - 42687 - Reason: No Additional Sense Information W 11:33:15 Retrying (1 of 20)... W 11:33:17 Retry Failed - Reason: Invalid Address For Write W 11:33:17 Retrying (2 of 20)... W 11:33:18 Retry Failed - Reason: Invalid Address For Write W 11:33:18 Retrying (3 of 20)... W 11:33:18 Retry Failed - Reason: Invalid Address For Write W 11:33:18 Retrying (4 of 20)... W 11:33:18 Retry Failed - Reason: Invalid Address For Write W 11:33:18 Retrying (5 of 20)... W 11:33:18 Retry Failed - Reason: Invalid Address For Write W 11:33:18 Retrying (6 of 20)... W 11:33:18 Retry Failed - Reason: Invalid Address For Write W 11:33:18 Retrying (7 of 20)... W 11:33:18 Retry Failed - Reason: Invalid Address For Write W 11:33:18 Retrying (8 of 20)... W 11:33:18 Retry Failed - Reason: Invalid Address For Write W 11:33:18 Retrying (9 of 20)... W 11:33:18 Retry Failed - Reason: Invalid Address For Write W 11:33:18 Retrying (10 of 20)... W 11:33:18 Retry Failed - Reason: Invalid Address For Write W 11:33:18 Retrying (11 of 20)... W 11:33:18 Retry Failed - Reason: Invalid Address For Write W 11:33:18 Retrying (12 of 20)... W 11:33:18 Retry Failed - Reason: Invalid Address For Write W 11:33:18 Retrying (13 of 20)... W 11:33:18 Retry Failed - Reason: Invalid Address For Write W 11:33:18 Retrying (14 of 20)... W 11:33:18 Retry Failed - Reason: Invalid Address For Write W 11:33:18 Retrying (15 of 20)... W 11:33:18 Retry Failed - Reason: Invalid Address For Write W 11:33:18 Retrying (16 of 20)... W 11:33:18 Retry Failed - Reason: Invalid Address For Write W 11:33:18 Retrying (17 of 20)... W 11:33:18 Retry Failed - Reason: Invalid Address For Write W 11:33:18 Retrying (18 of 20)... W 11:33:18 Retry Failed - Reason: Invalid Address For Write W 11:33:18 Retrying (19 of 20)... W 11:33:18 Retry Failed - Reason: Invalid Address For Write W 11:33:18 Retrying (20 of 20)... W 11:33:18 Retry Failed - Reason: Invalid Address For Write E 11:33:22 Failed to Write Sectors 42656 - 42687 - Reason: No Additional Sense Information E 11:33:23 Next Writable Address: 42672 I 11:33:23 Synchronising Cache... W 11:34:00 User opted to skip the 'Close Track/Session/Disc' functions. E 11:34:00 Failed to Write Image! I 11:34:00 Exporting Graph Data... I 11:34:00 Graph Data File: C:\Users\FiB3R\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS524_B_AL2A_11-DECEMBER-2012_11-32_MKM-003-00_4x.ibg I 11:34:00 Export Successfully Completed! E 11:34:00 Operation Failed! - Duration: 00:01:34 I 11:34:00 Average Write Rate: 3,554 KB/s (2.6x) - Maximum Write Rate: 5,631 KB/s (4.1x) Any ideas? Thanks.
LIGHTNING UK! Posted December 11, 2012 Posted December 11, 2012 Can't you get it off the JMicron controller and onto the Intel one? If you can't, at least ensure you have the latest driver installed. ftp://driver.jmicron.com.tw/SATA_Controller/Windows/ At the moment it looks like you're losing the initial I/O error message - i.e. the bit that is actually useful.
Recommended Posts