gbcmm Posted December 26, 2012 Posted December 26, 2012 I have tried over 20 DVDs and every time it fails i have even got new DVDs and still fails. I even tried to re-burn a game a had previously burned before but this time around it failed. This is what it says when i try to burn it: I 12:50:55 ImgBurn Version 2.5.7.0 started! I 12:50:55 Microsoft Windows 7 Ultimate Edition (6.1, Build 7600) I 12:50:55 Total Physical Memory: 3,079,092 KB - Available: 2,121,520 KB I 12:50:55 Initialising SPTI... I 12:50:55 Searching for SCSI / ATAPI devices... I 12:50:57 -> Drive 1 - Info: HL-DT-ST DVDRAM GSA-T20L NC08 (E:) (ATA) I 12:50:57 Found 1 DVD±RW/RAM! W 12:53:41 User accepted disc space warning and is attempting to truncate! I 12:53:42 Operation Started! I 12:53:42 Source File: G:\Computer Stuff\Germans Files\xbox\Far Cry 3\cry.dvd I 12:53:42 Source File Sectors: 4,267,015 (MODE1/2048) I 12:53:42 Source File Size: 8,738,846,720 bytes I 12:53:42 Source File Volume Identifier: DVD_ROM I 12:53:42 Source File Volume Set Identifier: ae9a8000MS UDFBridge I 12:53:42 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 12:53:42 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 12:53:42 Source File File System(s): ISO9660, UDF (1.50) I 12:53:42 Destination Device: [0:0:0] HL-DT-ST DVDRAM GSA-T20L NC08 (E:) (ATA) I 12:53:42 Destination Media Type: DVD+R DL (Disc ID: MBIPG101-R10-65) I 12:53:42 Destination Media Supported Write Speeds: 2.4x, 4x, 6x I 12:53:42 Destination Media Sectors: 4,173,824 I 12:53:42 Write Mode: DVD I 12:53:42 Write Type: DAO I 12:53:42 Write Speed: 2x I 12:53:42 DVD+R DL Reserve Track: No I 12:53:42 Link Size: Auto I 12:53:42 Lock Volume: Yes I 12:53:42 Test Mode: No I 12:53:42 OPC: No I 12:53:42 BURN-Proof: Enabled W 12:53:42 Write Speed Miscompare! - MODE SENSE: 3,324 KB/s (2.4x), GET PERFORMANCE: 8,310 KB/s (6x) W 12:53:42 Write Speed Miscompare! - MODE SENSE: 3,324 KB/s (2.4x), GET PERFORMANCE: 8,310 KB/s (6x) W 12:53:42 Write Speed Miscompare! - MODE SENSE: 3,324 KB/s (2.4x), GET PERFORMANCE: 8,310 KB/s (6x) W 12:53:42 Write Speed Miscompare! - MODE SENSE: 3,324 KB/s (2.4x), GET PERFORMANCE: 8,310 KB/s (6x) W 12:53:42 Write Speed Miscompare! - Wanted: 2,770 KB/s (2x), Got: 3,324 KB/s (2.4x) / 8,310 KB/s (6x) W 12:53:42 The drive only supports writing these discs at 2.4x, 4x, 6x. I 12:53:42 Book Type Setting: N/A (Reason: Invalid Command Operation Code) W 12:53:42 User specified layer break position exceeds L0 capacity. W 12:53:42 User Specified L0 Sectors: 2,133,520 W 12:53:42 Maximum L0 Sectors: 2,086,912 I 12:53:42 User Specified L0 Data Zone Capacity: 2,133,520 W 12:53:42 Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in Parameter List I 12:53:43 Filling Buffer... (73 MB) I 12:53:46 Writing LeadIn... I 12:55:18 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 12:55:18 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 12:55:18 Writing Layer 0... (LBA: 0 - 2086911) W 13:17:10 Failed to Write Sectors 2014048 - 2014079 - Reason: Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0x90) W 13:17:10 Retrying (1 of 20)... W 13:17:10 Retry Failed - Reason: Invalid Address For Write W 13:17:10 Retrying (2 of 20)... W 13:17:10 Retry Failed - Reason: Invalid Address For Write W 13:17:10 Retrying (3 of 20)... W 13:17:10 Retry Failed - Reason: Invalid Address For Write W 13:17:10 Retrying (4 of 20)... W 13:17:10 Retry Failed - Reason: Invalid Address For Write W 13:17:10 Retrying (5 of 20)... W 13:17:10 Retry Failed - Reason: Invalid Address For Write W 13:17:10 Retrying (6 of 20)... W 13:17:10 Retry Failed - Reason: Invalid Address For Write W 13:17:10 Retrying (7 of 20)... W 13:17:10 Retry Failed - Reason: Invalid Address For Write W 13:17:10 Retrying (8 of 20)... W 13:17:10 Retry Failed - Reason: Invalid Address For Write W 13:17:10 Retrying (9 of 20)... W 13:17:10 Retry Failed - Reason: Invalid Address For Write W 13:17:10 Retrying (10 of 20)... W 13:17:10 Retry Failed - Reason: Invalid Address For Write W 13:17:10 Retrying (11 of 20)... W 13:17:10 Retry Failed - Reason: Invalid Address For Write W 13:17:10 Retrying (12 of 20)... W 13:17:10 Retry Failed - Reason: Invalid Address For Write W 13:17:10 Retrying (13 of 20)... W 13:17:10 Retry Failed - Reason: Invalid Address For Write W 13:17:10 Retrying (14 of 20)... W 13:17:10 Retry Failed - Reason: Invalid Address For Write W 13:17:10 Retrying (15 of 20)... W 13:17:10 Retry Failed - Reason: Invalid Address For Write W 13:17:10 Retrying (16 of 20)... W 13:17:10 Retry Failed - Reason: Invalid Address For Write W 13:17:10 Retrying (17 of 20)... W 13:17:10 Retry Failed - Reason: Invalid Address For Write W 13:17:10 Retrying (18 of 20)... W 13:17:10 Retry Failed - Reason: Invalid Address For Write W 13:17:10 Retrying (19 of 20)... W 13:17:10 Retry Failed - Reason: Invalid Address For Write W 13:17:10 Retrying (20 of 20)... W 13:17:10 Retry Failed - Reason: Invalid Address For Write E 13:23:28 Failed to Write Sectors 2014048 - 2014079 - Reason: Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0x90) E 13:23:28 Next Writable Address: 2013520 I 13:23:28 Synchronising Cache... W 13:23:31 User opted to skip the 'Close Track/Session/Disc' functions. E 13:23:31 Failed to Write Image! I 13:23:31 Exporting Graph Data... I 13:23:31 Graph Data File: C:\Users\User\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GSA-T20L_NC08_WEDNESDAY-DECEMBER-26-2012_12-53_PM_MBIPG101-R10-65_2x.ibg I 13:23:31 Export Successfully Completed! E 13:23:32 Operation Failed! - Duration: 00:29:49 I 13:23:32 Average Write Rate: 2,384 KB/s (1.7x) - Maximum Write Rate: 3,376 KB/s (2.4x)
LIGHTNING UK! Posted December 26, 2012 Posted December 26, 2012 Your drive will always fail to set the layer break position to 2133520, it can't physically do it. You need a drive that supports overburning DVD+R DL media for these larger disc images. As for the error during the burn, refer to this... http://forum.imgburn.com/index.php?showtopic=8000
gbcmm Posted December 26, 2012 Author Posted December 26, 2012 It will always fail? but i have used this same computer to burn game things before and never failed until recently, it worked just fine just recently it stopped working.
LIGHTNING UK! Posted December 26, 2012 Posted December 26, 2012 Yes, attempting to use the 2133520 will always fail. and by 'fail', I mean report that error/warning. That isn't the actual reason behind the complete failure. The complete failure of the operation comes down to your drive having a problem with the 'MBIPG101-R10-65' MID discs you're using. Try some others, as per that thread I linked you to.
Recommended Posts