Rside Posted December 31, 2012 Posted December 31, 2012 Hello. Im trying to burn xbox360 game to Acme DVD+R DL disk. But already 3 disks went to trash, and only 1 burn were successeful. problem are always the same: I 11:28:21 ImgBurn Version 2.5.7.0 started! I 11:28:21 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1) I 11:28:21 Total Physical Memory: 4 126 284 KB - Available: 1 937 352 KB I 11:28:21 Initialising SPTI... I 11:28:21 Searching for SCSI / ATAPI devices... I 11:28:23 -> Drive 1 - Info: TSSTcorp CDDVDW SH-S202N SB02 (E:) (ATA) I 11:28:23 Found 1 DVD±RW/RAM! W 11:32:28 User accepted disc space warning and is attempting to truncate! I 11:32:28 Operation Started! I 11:32:28 Source File: D:\Downloads\Skyrim RUSSOUND UPD\Skyrim.dvd I 11:32:28 Source File Sectors: 4 267 015 (MODE1/2048) I 11:32:28 Source File Size: 8 738 846 720 bytes I 11:32:28 Source File Volume Identifier: DVD_ROM I 11:32:28 Source File Volume Set Identifier: 90bd4000MS UDFBridge I 11:32:28 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 11:32:28 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 11:32:28 Source File File System(s): ISO9660; UDF (1.50) I 11:32:28 Destination Device: [0:0:0] TSSTcorp CDDVDW SH-S202N SB02 (E:) (ATA) I 11:32:28 Destination Media Type: DVD+R DL (Disc ID: MBIPG101-R10-65) I 11:32:28 Destination Media Supported Write Speeds: 4x; 6x; 8x I 11:32:28 Destination Media Sectors: 4 173 824 I 11:32:28 Write Mode: DVD I 11:32:28 Write Type: DAO I 11:32:28 Write Speed: 1x I 11:32:28 DVD+R DL Reserve Track: No I 11:32:28 Link Size: Auto I 11:32:28 Lock Volume: Yes I 11:32:28 Test Mode: No I 11:32:28 OPC: No I 11:32:28 BURN-Proof: Enabled W 11:32:28 Write Speed Miscompare! - Wanted: 1 385 KB/s (1x), Got: 5 540 KB/s (4x) W 11:32:28 The drive only supports writing these discs at 4x; 6x; 8x. I 11:32:28 Book Type Setting: DVD-ROM W 11:32:28 User specified layer break position exceeds L0 capacity. W 11:32:28 User Specified L0 Sectors: 2 133 520 W 11:32:28 Maximum L0 Sectors: 2 086 912 I 11:32:28 User Specified L0 Data Zone Capacity: 2 133 520 W 11:32:28 Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in Parameter List I 11:32:30 Filling Buffer... (80 MB) I 11:32:31 Writing LeadIn... I 11:33:39 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 11:33:39 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 11:33:39 Writing Layer 0... (LBA: 0 - 2086911) W 11:44:44 Failed to Write Sectors 1697408 - 1697439 - Reason: Write Error W 11:44:45 Retrying (1 of 20)... W 11:44:45 Retry Failed - Reason: Invalid Address For Write W 11:44:45 Retrying (2 of 20)... W 11:44:45 Retry Failed - Reason: Invalid Address For Write W 11:44:45 Retrying (3 of 20)... W 11:44:45 Retry Failed - Reason: Invalid Address For Write W 11:44:45 Retrying (4 of 20)... W 11:44:45 Retry Failed - Reason: Invalid Address For Write W 11:44:45 Retrying (5 of 20)... W 11:44:45 Retry Failed - Reason: Invalid Address For Write W 11:44:45 Retrying (6 of 20)... W 11:44:45 Retry Failed - Reason: Invalid Address For Write W 11:44:45 Retrying (7 of 20)... W 11:44:45 Retry Failed - Reason: Invalid Address For Write W 11:44:45 Retrying (8 of 20)... W 11:44:45 Retry Failed - Reason: Invalid Address For Write W 11:44:45 Retrying (9 of 20)... W 11:44:45 Retry Failed - Reason: Invalid Address For Write W 11:44:45 Retrying (10 of 20)... W 11:44:45 Retry Failed - Reason: Invalid Address For Write W 11:44:45 Retrying (11 of 20)... W 11:44:45 Retry Failed - Reason: Invalid Address For Write W 11:44:45 Retrying (12 of 20)... W 11:44:45 Retry Failed - Reason: Invalid Address For Write W 11:44:45 Retrying (13 of 20)... W 11:44:45 Retry Failed - Reason: Invalid Address For Write W 11:44:45 Retrying (14 of 20)... W 11:44:45 Retry Failed - Reason: Invalid Address For Write W 11:44:45 Retrying (15 of 20)... W 11:44:45 Retry Failed - Reason: Invalid Address For Write W 11:44:45 Retrying (16 of 20)... W 11:44:45 Retry Failed - Reason: Invalid Address For Write W 11:44:45 Retrying (17 of 20)... W 11:44:45 Retry Failed - Reason: Invalid Address For Write W 11:44:45 Retrying (18 of 20)... W 11:44:45 Retry Failed - Reason: Invalid Address For Write W 11:44:45 Retrying (19 of 20)... W 11:44:45 Retry Failed - Reason: Invalid Address For Write W 11:44:45 Retrying (20 of 20)... W 11:44:45 Retry Failed - Reason: Invalid Address For Write Why? Whats wrong? I set up ImgBurn as in instruction. (Settings>Write> Layer break: user specified: 2133520. ) Is it fine?
LIGHTNING UK! Posted December 31, 2012 Posted December 31, 2012 http://forum.imgburn.com/index.php?showtopic=8000
Rside Posted December 31, 2012 Author Posted December 31, 2012 http://forum.imgburn.com/index.php?showtopic=8000 Thanks, but i already read this thread. But all disks are new, my drive firmware is latest (sb02), and disks are fine, i know many people who burns sucessefully on it.
LIGHTNING UK! Posted December 31, 2012 Posted December 31, 2012 If everything was fine, you wouldn't be here. The advice is all there in that thread, you can do with it as you please.
Rside Posted December 31, 2012 Author Posted December 31, 2012 If everything was fine, you wouldn't be here. The advice is all there in that thread, you can do with it as you please. Not everything, in abgx360 image passes all tests, but in last one : "Game partition CRC does not match the verified ini! There are 4 possibilities:" but im not sure if that's a bad rip or modified rip. But as i remember when i burned successfully everething were ok there. So i think problem can be in here.
LIGHTNING UK! Posted December 31, 2012 Posted December 31, 2012 It has nothing to do with what you're burning. Your drive is just having trouble burning to those discs.
Rside Posted December 31, 2012 Author Posted December 31, 2012 It has nothing to do with what you're burning. Your drive is just having trouble burning to those discs. Well, fcuk. But why i burned one image with no problems? And i dont remember writing speed then, maybe it was 2.4x, and now i burn with 1x, as in instruction.
Cynthia Posted December 31, 2012 Posted December 31, 2012 And i dont remember writing speed then, maybe it was 2.4x, and now i burn with 1x, as in instruction. W 11:32:28 Write Speed Miscompare! - Wanted: 1 385 KB/s (1x), Got: 5 540 KB/s (4x)W 11:32:28 The drive only supports writing these discs at 4x; 6x; 8x. No, you burned with 4x, as that one is the lowest possible speed with your combo of media/writer.
Rside Posted December 31, 2012 Author Posted December 31, 2012 (edited) And i dont remember writing speed then, maybe it was 2.4x, and now i burn with 1x, as in instruction. W 11:32:28 Write Speed Miscompare! - Wanted: 1 385 KB/s (1x), Got: 5 540 KB/s (4x)W 11:32:28 The drive only supports writing these discs at 4x; 6x; 8x. No, you burned with 4x, as that one is the lowest possible speed with your combo of media/writer. I know, if i set to 1x, it goes to 4x But what if i will set 2.4x? Same? Edited December 31, 2012 by Rside
Cynthia Posted December 31, 2012 Posted December 31, 2012 Yes. I 11:32:28 Destination Media Type: DVD+R DL (Disc ID: MBIPG101-R10-65) That disc id is tricky for some burners, I would go for Verbatim AZO Made in Singapore instead if you want to "overburn".
Rside Posted December 31, 2012 Author Posted December 31, 2012 Yes. I 11:32:28 Destination Media Type: DVD+R DL (Disc ID: MBIPG101-R10-65) That disc id is tricky for some burners, I would go for Verbatim AZO Made in Singapore instead if you want to "overburn". oh thanks. googling now.
Rside Posted December 31, 2012 Author Posted December 31, 2012 I think these verbatims will be fine? 10disks -15$.
Cynthia Posted December 31, 2012 Posted December 31, 2012 Odd thing is that the label AZO is not in that image. It should be something like this:
Rside Posted December 31, 2012 Author Posted December 31, 2012 Odd thing is that the label AZO is not in that image. It should be something like this: Found them. But they are more expensive.
Rside Posted December 31, 2012 Author Posted December 31, 2012 So, i have proof that these disks works with IHAS124 D. Maybe will work with my samsung too?
Rside Posted January 5, 2013 Author Posted January 5, 2013 Hello, i forgot to reply here. Bought Verbatim, now i dont have any problems with burning.
LIGHTNING UK! Posted January 5, 2013 Posted January 5, 2013 Glad to hear it Of course, that's why the 'pinned' topic I linked you to in post #2 exists in the first place
Recommended Posts