.exe Posted January 24, 2013 Posted January 24, 2013 Hi again, İ have downloaded a bootale İSO that i'm going to burn on a CD.When i double clicked the iso,my İMGBURN opened with the Write Speed set to MAX. İs that the correct write speed for a bootable iso OR should i changed ? Thank you.
LIGHTNING UK! Posted January 24, 2013 Posted January 24, 2013 For CDs (assuming they're 48x or 52x), I normally go for 24x. Really it's all down to the drive and media you're using. It being a bootable image makes no difference.
.exe Posted January 24, 2013 Author Posted January 24, 2013 For CDs (assuming they're 48x or 52x), I normally go for 24x. And for DVD'S what speed would that be ? Mine are PHİLİPS -R and on them it says 1-16X SPEED ! Thanks
ianymaty Posted January 24, 2013 Posted January 24, 2013 Usualy half of MAX speed supported should be OK, so 8X, that's my theory.
.exe Posted January 24, 2013 Author Posted January 24, 2013 Thanks ianymaty 8x is my bet as well,however if LIGHTNING UK! disagrees,i would like to know !
.exe Posted January 25, 2013 Author Posted January 25, 2013 Thank you very much indeed,for the prompt replies.You're always very helpful. Regards
Recommended Posts