Cant play read disc

[Adrianvdh]

Hello everyone I bought 4 Blu-ray movies today and one of then is Robots . So now I want to copy this disc so I insert the disc in my drive and DVDFab Passkey does it's thing and then AACS has been removed and ImgBurn says Ready no copy protection... SO I create the ISO and after about an hour I mount the ISO with DVDFab Virtual Drive and it mounts and then I load up VLC so I can watch it. So I go to open Disc and select I: drive (the mounted ISO) and VLC make full screen thing (1080x1920) and I show the movie is 1 hour and 29 minutes long in the time line and it starts moving and I just get a black and pixelated video. I don't understand I just defragged my drive with Windows Defragger and my HDD works but why wont the movie work? It couldn't be a copy protection problem because VLC would say in it's little log the disc contains AACS

Yes I am running the latest DVDFab Passkey (8.0.9.4)

Please help me...

 

 

I 16:16:55 ImgBurn Version 2.5.7.0 started!

I 16:16:55 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1)

I 16:16:55 Total Physical Memory: 8 379 444 KB  -  Available: 6 453 244 KB

W 16:16:55 DVDFab Passkey can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled!

I 16:16:55 Initialising SPTI...

I 16:16:55 Searching for SCSI / ATAPI devices...

I 16:16:56 -> Drive 1 - Info: HL-DT-ST BD-RE  BH10LS30 1.01-A0 (I:) (ATA)

I 16:16:56 -> Drive 2 - Info: DVDFab Virtual Drive 1.1 (R:) (SCSI)

I 16:16:56 Found 1 BD-ROM/HD DVD-ROM and 1 BD-RE!

I 16:17:37 Operation Started!

I 16:17:37 Source Device: [3:0:0] HL-DT-ST BD-RE  BH10LS30 1.01 (I:) (ATA)

I 16:17:37 Source Media Type: BD-R

I 16:17:37 Source Media Supported Write Speeds: 0.2x, 0.3x, 0.6x, 1x, 1.3x, 1.6x, 1.9x

I 16:17:37 Source Media Sectors: 16 844 096

I 16:17:37 Source Media Size: 34 496 708 608 bytes

I 16:17:37 Source Media Volume Identifier: ROBOTS

I 16:17:37 Source Media Volume Set Identifier: 8CC73F91F0670B49_VOLUME_SET_ID

I 16:17:37 Source Media Application Identifier: APPLICATION_ID

I 16:17:37 Source Media Implementation Identifier: IMPLEMENTATION_ID

I 16:17:37 Source Media File System(s): UDF (2.50)

I 16:17:37 Read Speed (Data/Audio): MAX / 8x

I 16:17:37 Destination File: J:\Robots.iso

I 16:17:37 Destination Free Space: 1 438 402 629 632 Bytes (1 404 690 068.00 KB) (1 371 767.64 MB) (1 339.62 GB)

I 16:17:37 Destination File System: NTFS

I 16:17:37 File Splitting: Auto

I 16:17:41 Reading Session 1 of 1... (1 Track, LBA: 0 - 16844095)

I 16:17:41 Reading Track 1 of 1... (MODE1/2048, LBA: 0 - 16844095)

I 16:58:30 Exporting Graph Data...

I 16:58:30 Graph Data File: C:\Users\Adrian\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_BH10LS30_1.01_13-APRIL-2013_04-17_PM_N-A.ibg

I 16:58:30 Export Successfully Completed!

I 16:58:30 Operation Successfully Completed! - Duration: 00:40:52

I 16:58:30 Average Read Rate: 13 739 KB/s (3.1x) - Maximum Read Rate: 19 319 KB/s (4.3x)

I 17:40:22 Close Request Acknowledged

I 17:40:22 Closing Down...

I 17:40:22 Shutting down SPTI...

I 17:40:22 ImgBurn closed!

 

P.S this issue also happend with the movie Aliens in the attic, but not any other Blu-ray of mine

 

The disc are brand new not a single scratch

Edited April 13, 2013 by Adrianvdh

[ianymaty]

This isn't ImgBurn problem. No help on this forum.

 

Go to DVDFab Passkey forum and ask for help there.