Jump to content

Recommended Posts

Posted (edited)

Windows7

Im getting this error using ihas 524 B drive trying to burn a xdg3 game using Verbatim DVD-DL with BurnerMax Tool (((((Unable To Lock Drive For Exclusive Access))))

I've tried both speeds 2.4x and 4x with proper settings...i even flashed the drive with BurnerMax flash without using BurnerMax Tool...and still exacly the same error.

First, the drive is working fine and its brand new. It has the latest firmware. I used it on other program (CloneCD) to burn a xgd2 game and it worked perfecly fine without any problems. Please notice CloneCD is not locking my drive or running in the backround its not showing in Task Manager. I've checked on PROCESS EXPLORER and UNLOCKER.

I've checked if any other program is using the drive/is locking the drive, i used Process Explorer and Unlocker. Nothing is locking my drive according to those programs. Ive also checked on Task manager and made sure nothing which can create this error is running. I have latest Nero, DVDFab and CloneCD installed (NOT NERO INCD). The drive is not burning xgd2 backups either using imgburn...the same error. but please note, when i tried other drive on the same PC,  it worked fine with ImgBurn, and other programs. The iHAS drive i have the problem with, wasn't used with any other program prior to trying to burn with imgburn. Ive installed it on PC and straight to imgburn. Other drives work fine with imgburn. Ive uninstalled DVDFab, CloneCD. even VLC player and tried it...same error !!! I havent uninstalled Nero but nero is definetly NOT RUNNING and INCD is not installed. I even turned off SideBar, but still no luck. I never had any problems with imgburn and other drives before. The drive works fine with other programs like i mentioned above. 

 

PLEASE HELP !!!!!!!!!!!!!!!!!!!!!!!

Ive spend so many nights and hours trying to sort this out....  :-(

post-52243-0-99133800-1368235734_thumb.jpg

post-52243-0-34845400-1368235764_thumb.jpg

Edited by anglik24
Posted

Right click the drive selection box and click 'Family Tree'.

 

Close the prompt and then copy + paste everything from the Log window please.

 

btw, being unable to lock the drive isn't a show stopper, just click 'Continue'.

 

You could also try again when you've booted Windows into 'Safe Mode'.

Posted (edited)

Im not sure if i supposed right-click on the drive before i press burn and recieve the error or after.

I'll send both:

 

After recieving the error

 

I 18:22:07 ImgBurn Version 2.5.7.0 started!
I 18:22:07 Microsoft Windows 7 Ultimate Edition (6.1, Build 7601 : Service Pack 1)
I 18:22:07 Total Physical Memory: 2,096,696 KB  -  Available: 1,187,048 KB
I 18:22:07 Initialising SPTI...
I 18:22:07 Searching for SCSI / ATAPI devices...
I 18:22:08 -> Drive 1 - Info: ATAPI iHAS524   B AL2A (X:) (ATA)
I 18:22:09 -> Drive 2 - Info: HL-DT-ST DVD-RAM GSA-H55N 1.06-08 (F:) (ATA)
I 18:22:09 -> Drive 3 - Info: HL-DT-ST DVD-ROM GDR8164B 0D08-0B (W:) (ATA)
I 18:22:09 Found 1 DVD-ROM and 2 DVD±RW/RAMs!
I 18:22:20 Operation Started!
I 18:22:20 Source File: G:\Resident Evil 6 ;-)\Disc_1\complex-re6dvd1.dvd
I 18:22:21 Source File Sectors: 4,267,015 (MODE1/2048)
I 18:22:21 Source File Size: 8,738,846,720 bytes
I 18:22:21 Source File Volume Identifier: DVD_ROM
I 18:22:21 Source File Volume Set Identifier: eccbc000MS UDFBridge
I 18:22:21 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 18:22:21 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 18:22:21 Source File File System(s): ISO9660, UDF (1.50)
I 18:22:21 Destination Device: [2:0:0] ATAPI iHAS524   B AL2A (X:) (ATA)
I 18:22:21 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00)
I 18:22:21 Destination Media Supported Write Speeds: 4x, 6x, 8x, 12x, 16x
I 18:22:21 Destination Media Sectors: 4,267,040
I 18:22:21 Write Mode: DVD
I 18:22:21 Write Type: DAO
I 18:22:21 Write Speed: 4x
I 18:22:21 DVD+R DL Reserve Track: No
I 18:22:21 Link Size: Auto
I 18:22:21 Lock Volume: Yes
I 18:22:21 Test Mode: No
I 18:22:21 OPC: Yes
I 18:22:21 BURN-Proof: Enabled
W 18:22:21 DeviceIoControl(IOCTL_STORAGE_MCN_CONTROL) Failed! - Media change notification has NOT been disabled.
 
Before getting the error

 

 

I 18:31:19 ImgBurn Version 2.5.7.0 started!
I 18:31:19 Microsoft Windows 7 Ultimate Edition (6.1, Build 7601 : Service Pack 1)
I 18:31:19 Total Physical Memory: 2,096,696 KB  -  Available: 1,206,864 KB
I 18:31:19 Initialising SPTI...
I 18:31:19 Searching for SCSI / ATAPI devices...
I 18:31:19 -> Drive 1 - Info: ATAPI iHAS524   B AL2A (X:) (ATA)
I 18:31:20 -> Drive 2 - Info: HL-DT-ST DVD-RAM GSA-H55N 1.06-08 (F:) (ATA)
I 18:31:21 -> Drive 3 - Info: HL-DT-ST DVD-ROM GDR8164B 0D08-0B (W:) (ATA)
I 18:31:21 Found 1 DVD-ROM and 2 DVD±RW/RAMs!
I 18:31:33 Device: [2:0:0] ATAPI iHAS524   B AL2A (X:) (ATA)
I 18:31:33 Family Tree:
I 18:31:33 -> ACPI x86-based PC
I 18:31:33 -> Microsoft ACPI-Compliant System
I 18:31:33 -> PCI bus
I 18:31:33 -> Standard Dual Channel PCI IDE Controller (VEN_10DE&DEV_0054 - NVIDIA - pciide - v6.1.7601.17514)
I 18:31:33 -> IDE Channel (ATA Channel 0)
I 18:31:33 -> CD-ROM Drive (ATAPI iHAS524   B ATA Device) (Channel 0, Target 0, Lun 0)
 
 
I'll try to to ignore the error, press continue and just burn now. I'll post if the burn was successfull in 5
Edited by anglik24
Posted

I 18:44:00 ImgBurn Version 2.5.7.0 started!

I 18:44:00 Microsoft Windows 7 Ultimate Edition (6.1, Build 7601 : Service Pack 1)

I 18:44:00 Total Physical Memory: 2,096,696 KB  -  Available: 1,210,996 KB

I 18:44:00 Initialising SPTI...

I 18:44:00 Searching for SCSI / ATAPI devices...

I 18:44:01 -> Drive 1 - Info: ATAPI iHAS524   B AL2A (X:) (ATA)

I 18:44:01 -> Drive 2 - Info: HL-DT-ST DVD-RAM GSA-H55N 1.06-08 (F:) (ATA)

I 18:44:02 -> Drive 3 - Info: HL-DT-ST DVD-ROM GDR8164B 0D08-0B (W:) (ATA)

I 18:44:02 Found 1 DVD-ROM and 2 DVD±RW/RAMs!

I 18:44:15 Device: [2:0:0] ATAPI iHAS524   B AL2A (X:) (ATA)

I 18:44:15 Family Tree:

I 18:44:15 -> ACPI x86-based PC

I 18:44:15 -> Microsoft ACPI-Compliant System

I 18:44:15 -> PCI bus

I 18:44:15 -> Standard Dual Channel PCI IDE Controller (VEN_10DE&DEV_0054 - NVIDIA - pciide - v6.1.7601.17514)

I 18:44:15 -> IDE Channel (ATA Channel 0)

I 18:44:15 -> CD-ROM Drive (ATAPI iHAS524   B ATA Device) (Channel 0, Target 0, Lun 0)

 

Posted (edited)

is this it ? I open Imgburn click tools...click drive....click family tree. Close prompt and copy log

Right-clicking the destonation drive box does the same.

Edited by anglik24
Posted (edited)

Its a coaster  :bomb:  :-(

 

Burned at 4x with right settings

The burn was successfully completed but the game doesnt work :-(

Edited by anglik24
Posted

Post the log from the failed burn please.

 

Also, try looking for some updated nvidia drivers for your motherboard chipset / OS combo.

 

It makes no sense that it wouldn't be able to lock the drive is everything was working as it should be and nothing else is using the drive. It's quite a low level OS function that's failing.

Posted

 I 18:50:15 ImgBurn Version 2.5.7.0 started!

I 18:50:15 Microsoft Windows 7 Ultimate Edition (6.1, Build 7601 : Service Pack 1)
I 18:50:15 Total Physical Memory: 2,096,696 KB  -  Available: 1,211,468 KB
I 18:50:15 Initialising SPTI...
I 18:50:15 Searching for SCSI / ATAPI devices...
I 18:50:16 -> Drive 1 - Info: ATAPI iHAS524   B AL2A (X:) (ATA)
I 18:50:16 -> Drive 2 - Info: HL-DT-ST DVD-RAM GSA-H55N 1.06-08 (F:) (ATA)
I 18:50:17 -> Drive 3 - Info: HL-DT-ST DVD-ROM GDR8164B 0D08-0B (W:) (ATA)
I 18:50:17 Found 1 DVD-ROM and 2 DVD±RW/RAMs!
I 18:50:47 Device: [2:0:0] ATAPI iHAS524   B AL2A (X:) (ATA)
I 18:50:47 Family Tree:
I 18:50:47 -> ACPI x86-based PC
I 18:50:47 -> Microsoft ACPI-Compliant System
I 18:50:47 -> PCI bus
I 18:50:47 -> Standard Dual Channel PCI IDE Controller (VEN_10DE&DEV_0054 - NVIDIA - pciide - v6.1.7601.17514)
I 18:50:47 -> IDE Channel (ATA Channel 0)
I 18:50:47 -> CD-ROM Drive (ATAPI iHAS524   B ATA Device) (Channel 0, Target 0, Lun 0)
I 18:54:57 Operation Started!
I 18:54:57 Source File: G:\Resident Evil 6 ;-)\Disc_1\complex-re6dvd1.dvd
I 18:54:57 Source File Sectors: 4,267,015 (MODE1/2048)
I 18:54:57 Source File Size: 8,738,846,720 bytes
I 18:54:57 Source File Volume Identifier: DVD_ROM
I 18:54:57 Source File Volume Set Identifier: eccbc000MS UDFBridge
I 18:54:57 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 18:54:57 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 18:54:57 Source File File System(s): ISO9660, UDF (1.50)
I 18:54:57 Destination Device: [2:0:0] ATAPI iHAS524   B AL2A (X:) (ATA)
I 18:54:57 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00)
I 18:54:57 Destination Media Supported Write Speeds: 4x, 6x, 8x, 12x, 16x
I 18:54:57 Destination Media Sectors: 4,267,040
I 18:54:57 Write Mode: DVD
I 18:54:57 Write Type: DAO
I 18:54:57 Write Speed: 4x
I 18:54:57 DVD+R DL Reserve Track: No
I 18:54:57 Link Size: Auto
I 18:54:57 Lock Volume: Yes
I 18:54:57 Test Mode: No
I 18:54:57 OPC: Yes
I 18:54:57 BURN-Proof: Enabled
W 18:54:57 DeviceIoControl(IOCTL_STORAGE_MCN_CONTROL) Failed! - Media change notification has NOT been disabled.
W 18:55:03 DeviceIoControl(IOCTL_CDROM_EXCLUSIVE_ACCESS, Lock, 1) Failed! - Reason: The handle is invalid.
I 18:55:03 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)
I 18:55:03 Book Type Setting: DVD-ROM
I 18:55:03 Advanced Settings - Force HT: Yes, Online HT: No, OverSpeed: Yes, SmartBurn: Yes
I 18:55:34 Optimal L0 Data Zone Capacity: 2,133,520
I 18:55:34 Optimal L0 Data Zone Method: Copied From Original Disc
I 18:55:35 Set L0 Data Zone Capacity Succeeded!
I 18:55:36 Filling Buffer... (80 MB)
I 18:55:43 Writing LeadIn...
I 18:55:45 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014)
I 18:55:45 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)
I 18:55:45 Writing Layer 0... (LBA: 0 - 2133519)
I 19:08:59 Writing Layer 1... (LBA: 2133520 - 4267014)
I 19:22:18 Synchronising Cache...
I 19:22:30 Closing Track...
I 19:22:32 Finalising Disc...
I 19:23:05 Exporting Graph Data...
I 19:23:05 Graph Data File: C:\Users\BIGpol666\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS524_B_AL2A_12-MAY-2013_18-54_MKM-003-00_4x.ibg
I 19:23:05 Export Successfully Completed!
I 19:23:05 Operation Successfully Completed! - Duration: 00:28:08
I 19:23:05 Average Write Rate: 5,357 KB/s (3.9x) - Maximum Write Rate: 5,673 KB/s (4.1x)
I 19:38:47 Close Request Acknowledged
I 19:38:47 Closing Down...
I 19:38:47 Shutting down SPTI...
I 19:38:47 ImgBurn closed!
;
Posted

Turn off 'perform opc before write'.

Turn off 'overspeed' on the drive.

Re-enable the 'verify' option so you can actually see if the burnt disc is 100% readable.

Perform a 'clear opc history' on the drive.

 

When you've done all that, try again.

Posted (edited)

Ok...i'll try that...but every one saying at iHAS XGD3 burning communities that burning at 4x speed  "perform opc before write" has to be on. "Overspeed" option has to be enabled and "clear opc history" .... has to be left alone ?????????? Hmmmmm Do i still burn with 4x speed ???

When i tried it to burn at 2.4x speed with "perform opc before write" disabled, the log said that this drive not supporting 2.4x and it burned it at 4x anyways. That was when i tried it to burn with continue option anyway before i came here to this forum. It was a coaster !!!!!

I've done it with above settings still getting the "Unable To Lock Drive For Exclusive Access" error !

Do i continue with the burn anyway ??? 

 

I really appreaciate you helping me. This is really bogging me !!! Thank You very much Lighting UK

 

anglik24

Edited by anglik24

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.