Imageburn 2.5.8.0 and Sony Optriac

[Xander606]

Hello Imageburn community,

I have just updated Imageburn to the latest version 2.5.8.0

I am having some trouble with my new Sony Optriac Model AD-5280S plus.
The problem is that the device buffer does not fill to 100%It only manages to reach 96%
The drive is in ultra DMA 5, i have two other lite on ihas drive connected to the same pc.

I have replaced the sata cable, also changed sata ports twice.

Pc specs:

Amd extreme 9 Mb (990Fx chipset)

Amd FX-8350 Cpu

16Gb ddr3 (Gskill) 7-7-7-21

Windows 7-64bit (Home premium)

700w PSU

Although, all that is irrelevant, as only chipset,power,drive and Imageburn are really the only things that really relevant while burning. So i was Hoping, that i could get a bit of support here on imageburn support forums.

I almost forgot to mention i did update the AD-5280S plus to the latest firmware, i believe is 1z8.

Thank you for your time.

Xander

 

 

EDIT: I have let the drive complete the burn. The burn turned out great. I have scanned the disc with my ihas 224 drive using Kprobe. I am now determined to know what is the problem with the device buffer only filling to 96%?

Edited June 18, 2013 by Xander606

[LIGHTNING UK!]

It's just down to how the drive works internally and is nothing to worry about. Some sit on 50% all the time.

[Sigma]

I have the same drive with the same firmware and the device buffer only goes up to 96% for me too. Burns are very good quality though, so I've never worried about it. It was the same on 2.5.7.0 for me as well.