myltyl Posted June 29, 2013 Posted June 29, 2013 Hello! I want to burn a ISO into a DVD+R to play a wii game, but it don't work. I know I should use DVD-R, but I don't have one and I want to play now My wii has a modchip and play backup games. I tried to change the booktype and it says Failed: Invalid Command Operation Code This is the info HL-DT-ST DVD+-RW GA31N A102 (SATA) Current Profile: DVD+R Disc Information: Status: Empty State of Last Session: Empty Erasable: No Free Sectors: 2,295,104 Free Space: 4,700,372,992 bytes Free Time: 510:03:29 (MM:SS:FF) Next Writable Address: 0 MID: CMC MAG-M01-00 Supported Write Speeds: 2.4x, 4x, 8x Physical Format Information (ADIP): Disc ID: CMC MAG-M01-00 Book Type: DVD+R Part Version: 1 Disc Size: 120 mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 2,491,711 Last Physical Sector in Layer 0: 0 Physical Format Information (Last Recorded): Disc ID: CMC MAG-M01-00 Book Type: DVD+R Part Version: 1 Disc Size: 120 mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 2,491,711 Last Physical Sector in Layer 0: 0 Performance (Write Speed): Descriptor 1... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 2295103 (0x0023053F) -> RS: 11,080 KB/s (8x) - WS: 3,324 KB/s (2.4x) Descriptor 2... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 2295103 (0x0023053F) -> RS: 11,080 KB/s (8x) - WS: 5,540 KB/s (4x) Descriptor 3... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 2295103 (0x0023053F) -> RS: 11,080 KB/s (8x) - WS: 11,080 KB/s (8x) And the Family tree ACPI x 64 based PC Compatible ACPI Microsoft BUS PCI Intel® 5 series/3400 Series Chipset Family 6 port SATA AHCI controller - 3B2F (VEN_8086&DEV_3B2F Intel- msahci v9.1.9.1002 Canal IDE ( ATA Channel 1) Device: HL-DT-ST DVD+-RW GA31N ATA Device Channel 1, Target 0, Lun 0 Any Ideas?? Thank you!
LIGHTNING UK! Posted July 1, 2013 Posted July 1, 2013 Your drive many not support the booktype commands. If it did, the program would change it to DVD-ROM for that drive anyway. You don't need to do anything manually.
Recommended Posts