Jump to content

hp DVD-RAM drive DVD+R media "Disc Not Empty" error


rich_719

Recommended Posts

Any clues? Here is the output with DVD+R in drive.  Several new disks tried with same result.

 

Thx,

Rich

 

hp DVD-RAM UJ8D1 H.01 (RAID)
Current Profile: DVD+R

Disc Information:
Status: Complete
State of Last Session: Complete
Erasable: No
Sessions: 1
Sectors: 282,784
Size: 579,141,632 bytes
Time: 62:52:34 (MM:SS:FF)
MID: CMC MAG-M01-00
Supported Write Speeds: 2.4x, 4x, 6x, 8x

TOC Information:
Session 1... (LBA: 0)
-> Track 01  (Mode 1, LBA: 0 - 282783)
-> LeadOut  (LBA: 282784)

Disc Control Blocks Information:
HL-DT-ST GS30N

Physical Format Information (ADIP):
Disc ID: CMC MAG-M01-00
Book Type: DVD+R
Part Version: 1
Disc Size: 120 mm
Maximum Read Rate: Not Specified
Number of Layers: 1
Track Path: Parallel Track Path (PTP)
Linear Density: 0.267 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 2,491,711
Last Physical Sector in Layer 0: 0

Physical Format Information (Last Recorded):
Disc ID: CMC MAG-M01-00
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120 mm
Maximum Read Rate: Not Specified
Number of Layers: 1
Track Path: Parallel Track Path (PTP)
Linear Density: 0.267 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 479,391
Last Physical Sector in Layer 0: 0

Performance (Write Speed):
Descriptor 1...
-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 2295103 (0x0023053F)
-> RS: 5,540 KB/s (4x) - WS: 3,324 KB/s (2.4x)
Descriptor 2...
-> B0: 0x08, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 2295103 (0x0023053F)
-> RS: 5,540 KB/s (4x) - WS: 5,540 KB/s (4x)
Descriptor 3...
-> B0: 0x08, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 2295103 (0x0023053F)
-> RS: 5,540 KB/s (4x) - WS: 8,310 KB/s (6x)
Descriptor 4...
-> B0: 0x08, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 2295103 (0x0023053F)
-> RS: 5,540 KB/s (4x) - WS: 11,080 KB/s (8x)
 

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.