bumpcity76 Posted August 14, 2013 Share Posted August 14, 2013 I've been having a tough time burning XDG3 disks. My burns go off the deep end after the layer break. Here's my setup: Lenovo T520, i7, SSD hard drive, 8GBs RAM, Windows 7 x64 I first started using a Lite-On iHas 124 D with Imgburn 2.5.8.0 and MKM-003 and 001 Singapore disks. I always burn in safe mode. I tried every combination of setting in Imgburn and documented the kprobe results. I got close a couple of times, but never got a burn within recommended PI and PIF specifications. The drive is connected externally to my laptop. I tried using a SATA\ESATA cable to my laptop's ESATA port, as well as the X360 USB Pro v2 interface. I also tried all combinations in Imgburn with the source on my SSD and with the source on an external drive. Always bad after the layerbreak. I also tried disks from three different spindles. Now, I just received a Sony 5280S-CB-Plus and I'm still having issues after the layerbreak, using default Imgburn settings (minus disabling burnproof). After burning on the Sony, I placed the disk in the Lite-On for Kprobe scanning. I can't figure out what's going on. Could it be my laptop? Here's my latest Imgburn logs and kprobe results: ; //****************************************\\ ; ImgBurn Version 2.5.8.0 - Log ; Wednesday, 14 August 2013, 17:57:09 ; \\****************************************// ; ; I 17:26:20 ImgBurn Version 2.5.8.0 started! I 17:26:20 Microsoft Windows 7 Professional x64 Edition (6.1, Build 7601 : Service Pack 1, Safe Mode) I 17:26:20 Total Physical Memory: 8,230,128 KiB - Available: 7,480,472 KiB I 17:26:20 Initialising SPTI... I 17:26:20 Searching for SCSI / ATAPI devices... I 17:26:20 -> Drive 1 - Info: Optiarc DVD RW AD-5280S 1.Z8 (E:) (USB 2.0) I 17:26:20 Found 1 DVD±RW! I 17:27:00 Operation Started! I 17:27:00 Source File: C:\Users\krisf\Desktop\XCOM_EnemyUnknown\XCOM_EnemyUnknown.dvd I 17:27:00 Source File Sectors: 4,267,015 (MODE1/2048) I 17:27:00 Source File Size: 8,738,846,720 bytes I 17:27:00 Source File Volume Identifier: DVD_ROM I 17:27:00 Source File Volume Set Identifier: c3e78000MS UDFBridge I 17:27:00 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 17:27:00 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 17:27:00 Source File File System(s): ISO9660, UDF (1.50) I 17:27:00 Destination Device: [0:0:0] Optiarc DVD RW AD-5280S 1.Z8 (E:) (USB) I 17:27:00 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) I 17:27:00 Destination Media Supported Write Speeds: 4x, 6x, 8x I 17:27:00 Destination Media Sectors: 4,267,040 I 17:27:00 Destination Media L0 Data Zone Capacity: 2,133,520 (Changeable: Yes) I 17:27:00 Write Mode: DVD I 17:27:00 Write Type: DAO I 17:27:00 Write Speed: 4x I 17:27:00 DVD+R DL Reserve Track: No I 17:27:00 Link Size: Auto I 17:27:00 Lock Volume: Yes I 17:27:00 Test Mode: No I 17:27:00 OPC: No I 17:27:00 BURN-Proof: Disabled I 17:27:00 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x) I 17:27:00 Book Type Setting: DVD-ROM I 17:27:00 Optimal L0 Data Zone Capacity: 2,133,520 I 17:27:00 Optimal L0 Data Zone Method: Copied From Original Disc I 17:27:09 Set L0 Data Zone Capacity Succeeded! I 17:27:09 L0 Data Zone Capacity - Effective: 2,133,520 I 17:27:09 Filling Buffer... (512 MiB) I 17:27:11 Writing LeadIn... I 17:27:14 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 17:27:14 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 17:27:14 Writing Layer 0... (LBA: 0 - 2133519) I 17:40:42 Writing Layer 1... (LBA: 2133520 - 4267014) I 17:54:19 Synchronising Cache... I 17:54:20 Closing Track... I 17:54:34 Finalising Disc... I 17:55:36 Exporting Graph Data... I 17:55:36 Graph Data File: C:\Users\krisf\AppData\Roaming\ImgBurn\Graph Data Files\Optiarc_DVD_RW_AD-5280S_1.Z8_WEDNESDAY-AUGUST-14-2013_5-27_PM_MKM-003-00_4x.ibg I 17:55:36 Export Successfully Completed! I 17:55:36 Operation Successfully Completed! - Duration: 00:28:35 I 17:55:36 Average Write Rate: 5,254 KiB/s (3.9x) - Maximum Write Rate: 5,467 KiB/s (4.0x) I 17:57:08 Close Request Acknowledged I 17:57:08 Closing Down... I 17:57:09 Shutting down SPTI... I 17:57:09 ImgBurn closed! ------------------------------------------------------ Kprobe results (burned with Sony, scanned by Lite-On Date : 8/14/2013 8:12:57 PM Model : 1-0-0-0 E:ATAPI iHAS124 D 8L0A Disc : DVD+R DL , MKM003 [Mitsubishi Chemical Corporation] Speed : 4x ECC blocks sum (PI/PIF) : 8/1 Scanned range : 0 - 4267015 Sampling count : 250127 Errors : 0 PI Max : 189 PI Average : 26.29 PI Total : 822310 PIF Max : 3 PIF Average : 0.19 PIF Total : 6076 Link to comment Share on other sites More sharing options...
bumpcity76 Posted August 14, 2013 Author Share Posted August 14, 2013 Well, I ran Nero Diskspeed with this latest burn in the Sony drive and here are the results: General Information Drive: Optiarc DVD RW AD-5280S Firmware: 1.Z8 Disc: DVD+R DL (n/a) Selected speed: 5 X PI Errors Maximum: 96 Average: 7.44 Total: 247905 PI failures Maximum: 10 Average: 0.02 Total: 4800 PO failures: - Jitter: - Scanning Statistics Elapsed time: 29:32 Number of samples: 33335 Average scanning interval: 8.00 ECC Glitches removed: 0 ------------------------------------------ According to this, the burn is acceptable. Why the big difference between kprobe and Discspeed? Now, I'm more confused than before. Link to comment Share on other sites More sharing options...
Recommended Posts