bumpcity76 Posted August 14, 2013 Posted August 14, 2013 I've been having a tough time burning XDG3 disks. My burns go off the deep end after the layer break. Here's my setup: Lenovo T520, i7, SSD hard drive, 8GBs RAM, Windows 7 x64 I first started using a Lite-On iHas 124 D with Imgburn 2.5.8.0 and MKM-003 and 001 Singapore disks. I always burn in safe mode. I tried every combination of setting in Imgburn and documented the kprobe results. I got close a couple of times, but never got a burn within recommended PI and PIF specifications. The drive is connected externally to my laptop. I tried using a SATA\ESATA cable to my laptop's ESATA port, as well as the X360 USB Pro v2 interface. I also tried all combinations in Imgburn with the source on my SSD and with the source on an external drive. Always bad after the layerbreak. I also tried disks from three different spindles. Now, I just received a Sony 5280S-CB-Plus and I'm still having issues after the layerbreak, using default Imgburn settings (minus disabling burnproof). After burning on the Sony, I placed the disk in the Lite-On for Kprobe scanning. I can't figure out what's going on. Could it be my laptop? Here's my latest Imgburn logs and kprobe results: ; //****************************************\\ ; ImgBurn Version 2.5.8.0 - Log ; Wednesday, 14 August 2013, 17:57:09 ; \\****************************************// ; ; I 17:26:20 ImgBurn Version 2.5.8.0 started! I 17:26:20 Microsoft Windows 7 Professional x64 Edition (6.1, Build 7601 : Service Pack 1, Safe Mode) I 17:26:20 Total Physical Memory: 8,230,128 KiB - Available: 7,480,472 KiB I 17:26:20 Initialising SPTI... I 17:26:20 Searching for SCSI / ATAPI devices... I 17:26:20 -> Drive 1 - Info: Optiarc DVD RW AD-5280S 1.Z8 (E:) (USB 2.0) I 17:26:20 Found 1 DVD±RW! I 17:27:00 Operation Started! I 17:27:00 Source File: C:\Users\krisf\Desktop\XCOM_EnemyUnknown\XCOM_EnemyUnknown.dvd I 17:27:00 Source File Sectors: 4,267,015 (MODE1/2048) I 17:27:00 Source File Size: 8,738,846,720 bytes I 17:27:00 Source File Volume Identifier: DVD_ROM I 17:27:00 Source File Volume Set Identifier: c3e78000MS UDFBridge I 17:27:00 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 17:27:00 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 17:27:00 Source File File System(s): ISO9660, UDF (1.50) I 17:27:00 Destination Device: [0:0:0] Optiarc DVD RW AD-5280S 1.Z8 (E:) (USB) I 17:27:00 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) I 17:27:00 Destination Media Supported Write Speeds: 4x, 6x, 8x I 17:27:00 Destination Media Sectors: 4,267,040 I 17:27:00 Destination Media L0 Data Zone Capacity: 2,133,520 (Changeable: Yes) I 17:27:00 Write Mode: DVD I 17:27:00 Write Type: DAO I 17:27:00 Write Speed: 4x I 17:27:00 DVD+R DL Reserve Track: No I 17:27:00 Link Size: Auto I 17:27:00 Lock Volume: Yes I 17:27:00 Test Mode: No I 17:27:00 OPC: No I 17:27:00 BURN-Proof: Disabled I 17:27:00 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x) I 17:27:00 Book Type Setting: DVD-ROM I 17:27:00 Optimal L0 Data Zone Capacity: 2,133,520 I 17:27:00 Optimal L0 Data Zone Method: Copied From Original Disc I 17:27:09 Set L0 Data Zone Capacity Succeeded! I 17:27:09 L0 Data Zone Capacity - Effective: 2,133,520 I 17:27:09 Filling Buffer... (512 MiB) I 17:27:11 Writing LeadIn... I 17:27:14 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 17:27:14 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 17:27:14 Writing Layer 0... (LBA: 0 - 2133519) I 17:40:42 Writing Layer 1... (LBA: 2133520 - 4267014) I 17:54:19 Synchronising Cache... I 17:54:20 Closing Track... I 17:54:34 Finalising Disc... I 17:55:36 Exporting Graph Data... I 17:55:36 Graph Data File: C:\Users\krisf\AppData\Roaming\ImgBurn\Graph Data Files\Optiarc_DVD_RW_AD-5280S_1.Z8_WEDNESDAY-AUGUST-14-2013_5-27_PM_MKM-003-00_4x.ibg I 17:55:36 Export Successfully Completed! I 17:55:36 Operation Successfully Completed! - Duration: 00:28:35 I 17:55:36 Average Write Rate: 5,254 KiB/s (3.9x) - Maximum Write Rate: 5,467 KiB/s (4.0x) I 17:57:08 Close Request Acknowledged I 17:57:08 Closing Down... I 17:57:09 Shutting down SPTI... I 17:57:09 ImgBurn closed! ------------------------------------------------------ Kprobe results (burned with Sony, scanned by Lite-On Date : 8/14/2013 8:12:57 PM Model : 1-0-0-0 E:ATAPI iHAS124 D 8L0A Disc : DVD+R DL , MKM003 [Mitsubishi Chemical Corporation] Speed : 4x ECC blocks sum (PI/PIF) : 8/1 Scanned range : 0 - 4267015 Sampling count : 250127 Errors : 0 PI Max : 189 PI Average : 26.29 PI Total : 822310 PIF Max : 3 PIF Average : 0.19 PIF Total : 6076
bumpcity76 Posted August 14, 2013 Author Posted August 14, 2013 Well, I ran Nero Diskspeed with this latest burn in the Sony drive and here are the results: General Information Drive: Optiarc DVD RW AD-5280S Firmware: 1.Z8 Disc: DVD+R DL (n/a) Selected speed: 5 X PI Errors Maximum: 96 Average: 7.44 Total: 247905 PI failures Maximum: 10 Average: 0.02 Total: 4800 PO failures: - Jitter: - Scanning Statistics Elapsed time: 29:32 Number of samples: 33335 Average scanning interval: 8.00 ECC Glitches removed: 0 ------------------------------------------ According to this, the burn is acceptable. Why the big difference between kprobe and Discspeed? Now, I'm more confused than before.
Recommended Posts