hemi1500 Posted September 7, 2013 Posted September 7, 2013 Since I have up dated from 2.5.7 to 2.5.8 I have been getting this same error W 15:47:32 Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in Parameter List. even though I get this error sometimes the games play and sometimes they don't, but never had this problem until I updated. Thanks for any help!!! 15:42:33 ImgBurn Version 2.5.8.0 started!I 15:42:33 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1)I 15:42:33 Total Physical Memory: 8,346,704 KiB - Available: 6,073,792 KiBI 15:42:33 Initialising SPTI...I 15:42:33 Searching for SCSI / ATAPI devices...I 15:42:33 -> Drive 1 - Info: ATAPI iHAS424 B GL1A (G:) (ATAPI)I 15:42:33 -> Drive 2 - Info: HL-DT-ST BD-RE BH30N A102 (E:) (ATAPI)I 15:42:33 Found 1 DVD±RW/RAM and 1 BD-RE!I 15:47:01 Operation Started!I 15:47:01 Source File: F:\Saints.Row.IV.XBOX360-iMARS\imars-sr4-360.dvdI 15:47:01 Source File Sectors: 4,267,015 (MODE1/2048)I 15:47:01 Source File Size: 8,738,846,720 bytesI 15:47:01 Source File Volume Identifier: DVD_ROMI 15:47:01 Source File Volume Set Identifier: ef764000MS UDFBridgeI 15:47:01 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)I 15:47:01 Source File Implementation Identifier: Microsoft CDIMAGE UDFI 15:47:01 Source File File System(s): ISO9660, UDF (1.50)I 15:47:01 Destination Device: [0:3:0] ATAPI iHAS424 B GL1A (G:) (ATAPI)I 15:47:01 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00)I 15:47:01 Destination Media Supported Write Speeds: 2.4x, 4x, 6x, 8xI 15:47:01 Destination Media Sectors: 4,267,040I 15:47:01 Destination Media L0 Data Zone Capacity: 2,133,520 (Changeable: Yes)I 15:47:01 Write Mode: DVDI 15:47:01 Write Type: DAOI 15:47:01 Write Speed: 4xI 15:47:01 DVD+R DL Reserve Track: NoI 15:47:01 Link Size: AutoI 15:47:01 Lock Volume: YesI 15:47:01 Test Mode: NoI 15:47:01 OPC: YesI 15:47:01 BURN-Proof: EnabledI 15:47:01 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)I 15:47:01 Book Type Setting: DVD-ROMI 15:47:01 Advanced Settings - Force HT: Yes, Online HT: No, OverSpeed: No, SmartBurn: YesI 15:47:01 CD/DVD Life Record Count: 759 - CD/DVD Record Count: 133I 15:47:32 Optimal L0 Data Zone Capacity: 2,133,520I 15:47:32 Optimal L0 Data Zone Method: Copied From Original DiscW 15:47:32 Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in Parameter ListI 15:47:32 L0 Data Zone Capacity - Effective: 2,133,520I 15:47:33 Filling Buffer... (512 MiB)I 15:47:38 Writing LeadIn...I 15:47:41 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014)I 15:47:41 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)I 15:47:41 Writing Layer 0... (LBA: 0 - 2133519)I 16:00:53 Writing Layer 1... (LBA: 2133520 - 4267014)I 16:14:07 Synchronising Cache...I 16:14:10 Closing Track...I 16:14:11 Finalising Disc...I 16:14:44 Exporting Graph Data...I 16:14:44 Graph Data File: C:\Users\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS424_B_GL1A_SUNDAY-AUGUST-25-2013_3-47_PM_MKM-003-00_4x.ibgI 16:14:44 Export Successfully Completed!I 16:14:44 Operation Successfully Completed! - Duration: 00:27:43I 16:14:44 Average Write Rate: 5,384 KiB/s (4.0x) - Maximum Write Rate: 5,501 KiB/s (4.1x)I 16:14:44 Cycling Tray before Verify...W 16:14:52 Waiting for device to become ready...I 16:15:06 Device Ready!I 16:15:07 Operation Started!I 16:15:07 Source Device: [0:3:0] ATAPI iHAS424 B GL1A (G:) (ATAPI)I 16:15:07 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-003-00)I 16:15:07 Source Media Supported Read Speeds: 2.4x, 4x, 6x, 8xI 16:15:07 Source Media Supported Write Speeds: 2.4x, 4x, 6x, 8xI 16:15:07 Source Media Sectors: 4,267,024 (Track Path: OTP - L0: 2,133,520 - L1: 2,133,504)I 16:15:07 Source Media Size: 8,738,865,152 bytesI 16:15:07 Image File: F:\Saints.Row.IV.XBOX360-iMARS\imars-sr4-360.dvdI 16:15:07 Image File Sectors: 4,267,015 (MODE1/2048)I 16:15:07 Image File Size: 8,738,846,720 bytesI 16:15:07 Image File Volume Identifier: DVD_ROMI 16:15:07 Image File Volume Set Identifier: ef764000MS UDFBridgeI 16:15:07 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)I 16:15:07 Image File Implementation Identifier: Microsoft CDIMAGE UDFI 16:15:07 Image File File System(s): ISO9660, UDF (1.50)I 16:15:07 Read Speed (Data/Audio): MAX / MAXI 16:15:08 Read Speed - Effective: 3.2x - 8xI 16:15:08 Verifying Session 1 of 1... (1 Track, LBA: 0 - 4267014)I 16:15:08 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)I 16:15:08 Verifying Layer 0... (LBA: 0 - 2133519)I 16:24:21 Verifying Layer 1... (LBA: 2133520 - 4267014)I 16:33:34 Exporting Graph Data...I 16:33:34 Graph Data File: C:\Users\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS424_B_GL1A_SUNDAY-AUGUST-25-2013_3-47_PM_MKM-003-00_4x.ibgI 16:33:34 Export Successfully Completed!I 16:33:34 Operation Successfully Completed! - Duration: 00:18:26I 16:33:34 Average Verify Rate: 7,730 KiB/s (5.7x) - Maximum Verify Rate: 10,966 KiB/s (8.1x)I 16:34:57 Close Request AcknowledgedI 16:34:57 Closing Down...I 16:34:57 Shutting down SPTI...I 16:34:57 ImgBurn closed!
LIGHTNING UK! Posted September 7, 2013 Posted September 7, 2013 It always failed like that, you just weren't told about it until the most recent version. The 'effective' layer break is where you want it to be and that's all you need to be concerned with.
Adrianvdh Posted September 7, 2013 Posted September 7, 2013 Why don't you convert you drive to a 624B?
hemi1500 Posted September 8, 2013 Author Posted September 8, 2013 ok did not know that is was failing all the time , the only thing that I was really worried about was after the update and going to 2.5.8 some of the disc were unreadable. and with the 2.5.7 I never hand any unreadable. Here is a log from where I went back to 2.5.7. Thanks for everything. ImgBurn Version 2.5.7.0 - Log ; Friday, 06 September 2013, 23:42:41 ; \\****************************************// ; ; I 21:20:49 ImgBurn Version 2.5.7.0 started! I 21:20:49 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1) I 21:20:49 Total Physical Memory: 8,346,704 KB - Available: 6,464,288 KB I 21:20:49 Initialising SPTI... I 21:20:49 Searching for SCSI / ATAPI devices... I 21:20:49 -> Drive 1 - Info: ATAPI iHAS424 B GL1A (G:) (ATAPI) I 21:20:49 -> Drive 2 - Info: HL-DT-ST BD-RE BH30N A102 (E:) (ATAPI) I 21:20:49 Found 1 DVD±RW/RAM and 1 BD-RE! I 21:22:19 Operation Started! I 21:22:19 Source File: F:\Arcania.The.Complete.Tale.XBOX360-COMPLEX\complex-arcania.complete.dvd I 21:22:19 Source File Sectors: 4,267,015 (MODE1/2048) I 21:22:19 Source File Size: 8,738,846,720 bytes I 21:22:19 Source File Volume Identifier: DVD_ROM I 21:22:19 Source File Volume Set Identifier: 3fb94000MS UDFBridge I 21:22:19 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 21:22:19 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 21:22:19 Source File File System(s): ISO9660, UDF (1.50) I 21:22:19 Destination Device: [0:3:0] ATAPI iHAS424 B GL1A (G:) (ATAPI) I 21:22:19 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) I 21:22:19 Destination Media Supported Write Speeds: 2.4x, 4x, 6x, 8x I 21:22:19 Destination Media Sectors: 4,267,040 I 21:22:19 Write Mode: DVD I 21:22:19 Write Type: DAO I 21:22:19 Write Speed: 4x I 21:22:19 DVD+R DL Reserve Track: No I 21:22:19 Link Size: Auto I 21:22:19 Lock Volume: Yes I 21:22:19 Test Mode: No I 21:22:19 OPC: Yes I 21:22:19 BURN-Proof: Enabled I 21:22:19 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x) I 21:22:19 Book Type Setting: DVD-ROM I 21:22:19 Advanced Settings - Force HT: Yes, Online HT: No, OverSpeed: No, SmartBurn: Yes I 21:22:49 Optimal L0 Data Zone Capacity: 2,133,520 I 21:22:49 Optimal L0 Data Zone Method: Copied From Original Disc I 21:22:49 Set L0 Data Zone Capacity Succeeded! I 21:22:49 Filling Buffer... (512 MB) I 21:22:54 Writing LeadIn... I 21:22:56 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 21:22:56 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 21:22:56 Writing Layer 0... (LBA: 0 - 2133519) I 21:36:09 Writing Layer 1... (LBA: 2133520 - 4267014) I 21:49:23 Synchronising Cache... I 21:49:28 Closing Track... I 21:49:29 Finalising Disc... I 21:50:03 Exporting Graph Data... I 21:50:03 Graph Data File: C:\Users\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS424_B_GL1A_FRIDAY-SEPTEMBER-06-2013_9-22_PM_MKM-003-00_4x.ibg I 21:50:03 Export Successfully Completed! I 21:50:03 Operation Successfully Completed! - Duration: 00:27:43 I 21:50:03 Average Write Rate: 5,380 KB/s (3.9x) - Maximum Write Rate: 5,636 KB/s (4.1x) I 21:50:03 Cycling Tray before Verify... W 21:50:10 Waiting for device to become ready... I 21:50:24 Device Ready! I 21:50:25 Operation Started! I 21:50:25 Source Device: [0:3:0] ATAPI iHAS424 B GL1A (G:) (ATAPI) I 21:50:25 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-003-00) I 21:50:25 Source Media Supported Write Speeds: 2.4x, 4x, 6x, 8x I 21:50:25 Image File: F:\Arcania.The.Complete.Tale.XBOX360-COMPLEX\complex-arcania.complete.dvd I 21:50:25 Image File Sectors: 4,267,015 (MODE1/2048) I 21:50:25 Image File Size: 8,738,846,720 bytes I 21:50:25 Image File Volume Identifier: DVD_ROM I 21:50:25 Image File Volume Set Identifier: 3fb94000MS UDFBridge I 21:50:25 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 21:50:25 Image File Implementation Identifier: Microsoft CDIMAGE UDF I 21:50:25 Image File File System(s): ISO9660, UDF (1.50) I 21:50:25 Read Speed (Data/Audio): MAX / MAX I 21:50:26 Verifying Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 21:50:26 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 21:50:26 Verifying Layer 0... (LBA: 0 - 2133519) I 21:59:39 Verifying Layer 1... (LBA: 2133520 - 4267014) I 22:08:52 Exporting Graph Data... I 22:08:52 Graph Data File: C:\Users\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS424_B_GL1A_FRIDAY-SEPTEMBER-06-2013_9-22_PM_MKM-003-00_4x.ibg I 22:08:52 Export Successfully Completed! I 22:08:52 Operation Successfully Completed! - Duration: 00:18:25 I 22:08:52 Average Verify Rate: 7,730 KB/s (5.6x) - Maximum Verify Rate: 11,259 KB/s (8.1x) Would it help if I converted my drive to A 624B Thanks for everything.
LIGHTNING UK! Posted September 8, 2013 Posted September 8, 2013 If it burns and verifies ok, it should at least be partly readable in other drives. Scan it with kprobe and check the burn quality. If it looks ok then it's probably the drive in your xbox. Burn quality has nothing to do with the program itself. I couldn't make it better/worse if I tried.
Recommended Posts