IMGBURN stops working

[jsaez89]

I'm am trying to burn XDG3 game on my ihas D drive. I use the burner max payload tool and everything goes well. When I burn my game here is the log i am getting

 

I 22:17:26 ImgBurn Version 2.5.8.0 started!

I 22:17:26 Microsoft Windows 8 Core x64 Edition (6.2, Build 9200)

I 22:17:26 Total Physical Memory: 3,639,560 KiB  -  Available: 1,941,788 KiB

I 22:17:26 Initialising SPTI...

I 22:17:26 Searching for SCSI / ATAPI devices...

I 22:17:26 -> Drive 1 - Info: ATAPI iHAS124   D 8L0A (F:) (USB 2.0)

I 22:17:27 -> Drive 2 - Info: hp DVD A  DS8A9SH EH61 (E:) (SATA)

I 22:17:27 Found 2 DVD±RW/RAMs!

I 22:21:42 Operation Started!

I 22:21:42 Source File: C:\Users\jsaez49

I 22:21:42 Source File Sectors: 4,267,015 (MODE1/2048)

I 22:21:42 Source File Size: 8,738,846,720 bytes

I 22:21:42 Source File Volume Identifier: DVD_ROM

I 22:21:42 Source File Volume Set Identifier: 67d90000MS UDFBridge

I 22:21:42 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 22:21:42 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 22:21:42 Source File File System(s): ISO9660, UDF (1.50)

I 22:21:42 Destination Device: [0:0:0] ATAPI iHAS124   D 8L0A (F:) (USB)

I 22:21:42 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00)

I 22:21:42 Destination Media Supported Write Speeds: 4x, 6x, 8x

I 22:21:42 Destination Media Sectors: 4,267,040

I 22:21:42 Destination Media L0 Data Zone Capacity: 2,133,520 (Changeable: Yes)

I 22:21:42 Write Mode: DVD

I 22:21:42 Write Type: DAO

I 22:21:43 Write Speed: 4x

I 22:21:43 DVD+R DL Reserve Track: No

I 22:21:43 Link Size: Auto

I 22:21:43 Lock Volume: Yes

I 22:21:43 Test Mode: No

I 22:21:43 OPC: Yes

I 22:21:43 BURN-Proof: Enabled

I 22:21:43 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)

I 22:21:43 Book Type Setting: DVD-ROM

I 22:21:43 Advanced Settings - Force HT: Yes, Online HT: No, OverSpeed: No, SmartBurn: Yes

I 22:21:43 CD/DVD Life Record Count: 24 - CD/DVD Record Count: 7

I 22:22:08 Optimal L0 Data Zone Capacity: 2,133,520

I 22:22:08 Optimal L0 Data Zone Method: Copied From Original Disc

I 22:22:08 Set L0 Data Zone Capacity Succeeded!

I 22:22:08 L0 Data Zone Capacity - Effective: 2,133,520

I 22:22:10 Filling Buffer... (512 MiB)

I 22:22:19 Writing LeadIn...

I 22:22:22 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014)

I 22:22:22 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)

I 22:22:22 Writing Layer 0... (LBA: 0 - 2133519)

 

 

My write rate goes up to 4.0x than after 15 seconds it goes down to 0.0x and does not move. Left it for a hour and nothing. Lost 5 disks already. Any tips?

 

 

imgburn.doc

[LIGHTNING UK!]

Turn off 'perform opc before write', you don't need it on. You don't need the payload tool either, it's built into 2.5.8.0.

 

As for the actual issue, I'd guess it's down to bad communication over your USB adapter. Can't you plug it in directly via sata/esata?