GXY Posted October 26, 2013 Posted October 26, 2013 Hi there. tried to resolve this problem searching this forum and other resources, but im stuck im using imgburn 2.5.7.0 to burn some DVDs (verbatim DVD-R)'s from .ISO files i have. problem is: the drive takes ages to actually start writing, recognising the disc or something. when i going to start writing, it gets SEVERAL minutes while saying "getting disc information", or "terminating auto insert thread", or "locking drive for exclusive access" and such. with "several" i refer to 15+ minutes to actually start writing. info from the log I 14:28:48 ImgBurn Version 2.5.7.0 started! I 14:28:48 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1) I 14:28:48 Total Physical Memory: 8.258.416 KB - Available: 6.030.020 KB I 14:28:48 Initialising SPTI... I 14:28:48 Searching for SCSI / ATAPI devices... I 14:28:48 -> Drive 1 - Info: ELBY CLONEDRIVE 1.4 (G:) (SCSI) I 14:28:48 -> Drive 2 - Info: HL-DT-ST DVD-RAM GSA-H55N 1.05-07 (E:) (RAID) I 14:28:48 Found 1 DVD±RW/RAM and 1 BD-ROM/HD DVD-ROM! I 14:30:33 Device: [8:5:0] HL-DT-ST DVD-RAM GSA-H55N 1.05 (E:) (RAID) I 14:30:33 Family Tree: I 14:30:33 -> ACPI x64-based PC I 14:30:33 -> Sistema Microsoft compatible con ACPI I 14:30:33 -> Bus PCI I 14:30:33 -> Puente PCI Intel(R) 82801 - 244E (VEN_8086&DEV_244E - Intel - pci) I 14:30:33 -> VIA RAID Controller - 3249 (VEN_1106&DEV_3249 - VIA - viamrx64) I 14:30:33 -> Unidad de CD-ROM (HL-DT-ST DVD-RAM GSA-H55N SCSI CdRom Device) (Bus Number 0, Target Id 5, LUN 0) I 14:46:43 Operation Started! I 14:46:43 Source File: D:\SB4.iso I 14:46:43 Source File Sectors: 2.294.912 (MODE1/2048) I 14:46:43 Source File Size: 4.699.979.776 bytes I 14:46:43 Source File Volume Identifier: DVD I 14:46:43 Source File File System(s): Special I 14:46:43 Destination Device: [8:5:0] HL-DT-ST DVD-RAM GSA-H55N 1.05 (E:) (RAID) I 14:46:43 Destination Media Type: DVD-R (Disc ID: MCC 03RG20) I 14:46:43 Destination Media Supported Write Speeds: 4x; 8x; 12x; 16x; 18x; 20x I 14:46:43 Destination Media Sectors: 2.298.496 I 14:46:43 Write Mode: DVD I 14:46:43 Write Type: DAO I 14:46:43 Write Speed: 4x I 14:46:43 Link Size: Auto I 14:46:43 Lock Volume: Yes I 14:46:43 Test Mode: No I 14:46:43 OPC: No I 14:46:43 BURN-Proof: Enabled I 14:49:23 Write Speed Successfully Set! - Effective: 5.540 KB/s (4x) I 14:49:23 Filling Buffer... (80 MB) I 14:49:24 Writing LeadIn... I 14:49:39 Writing Session 1 of 1... (1 Track, LBA: 0 - 2294911) I 14:49:39 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2294911) and there goes writing which it does OK why taking 15 minutes to actually recognise the disc? i tried... - substitute the drive with another one. the previous one simply freezes (or takes even longer). the actual one is which taking 15 minutes to start writing - tried imgburn 2.5.8.0 and 2.5.7.0, same results. tried also another software to write. also same history. - tried to update the VIA VT6421 drivers, but are already up to date (latest version is of april 2011) im using a VIA VT6421 IDE/SATA controller since DVD writer is LG H55 IDE and my actual motherboard (asrock B75) doesnt have IDE bus, so i have to use a controller card to continue using my IDE writer any possible solution? thanks in advance
LIGHTNING UK! Posted October 26, 2013 Posted October 26, 2013 Invest in an sata drive if the via card isn't working correctly with optical drives... Most raid cards don't.
GXY Posted October 26, 2013 Author Posted October 26, 2013 i'll try a SATA drive to discard if its a problem with the IDE controller. thanks for advice.
Recommended Posts