Cannot Burn via Imgburn but via Clone Cd it works.

[darthpratham]

Hey guy, i just got a new DVD drive, HP DVD1260i, just to burn the xbox360 isos.

 

It supports burner max payload

 

i tried all kinda settings. 

 

i get the error " Set LO Data Zone Capacity Failed! "

i skiped that to proceed

and then i get "I/O error bus or device reset" 

 

with clone cd i tried to truncate and it worked without any errors. 

 

any tricks?  

[LIGHTNING UK!]

Post the log please.

[darthpratham]

I changed some settings and luckily it worked for me.

OPC history re-cleared

buffer reduced to 256MB

and few more tweaks

 

The successful log is pasted below . this threat can be closed now  

 

 

 

 

I 09:19:12 ImgBurn Version 2.4.1.0 started!
I 09:19:12 Professional (6.2, Build 9200)
I 09:19:12 Total Physical Memory: 8,386,104 KB - Available: 6,864,304 KB
I 09:19:12 Initialising ElbyCDIO...
I 09:19:12 ELBYCDIO.DLL - Elaborate Bytes CDRTools - ElbyCDIO DLL - Version 6.1.2.0
I 09:19:12 Searching for SCSI / ATAPI devices...
I 09:19:12 Found 1 DVD±RW/RAM!
I 09:22:37 Operation Started!
I 09:22:37 Source File: C:\Users\Darth Vader\Desktop\Disk 1\disk1.dvd
I 09:22:37 Source File Sectors: 4,267,015 (MODE1/2048)
I 09:22:37 Source File Size: 8,738,846,720 bytes
I 09:22:37 Source File Volume Identifier: DVD_ROM
I 09:22:37 Source File Volume Set Identifier: 83d04000MS UDFBridge
I 09:22:37 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 09:22:37 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 09:22:37 Source File File System(s): ISO9660, UDF (1.50)
I 09:22:37 Destination Device: [1:1:0] HP DVD Writer 1260v AH24 (E:) (ATA)
I 09:22:37 Destination Media Type: DVD+R DL (Disc ID: MBIPG101-R12-00) (Speeds: 4x, 6x, 8x)
I 09:22:37 Destination Media Sectors: 4,267,040
I 09:22:37 Write Mode: DVD
I 09:22:37 Write Type: DAO
I 09:22:37 Write Speed: 4x
I 09:22:37 Link Size: Auto
I 09:22:37 Test Mode: No
I 09:22:37 OPC: Yes
I 09:22:37 BURN-Proof: Enabled
I 09:23:04 Optimal L0 Data Zone Capacity: 2,133,520
I 09:23:04 Optimal L0 Data Zone Method: Copied From Original Disc
I 09:23:06 Filling Buffer... (256 MB)
I 09:23:09 Writing LeadIn...
I 09:23:11 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014)
I 09:23:11 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)
I 09:23:12 Writing Layer 0... (LBA: 0 - 2133519)
I 09:36:13 Writing Layer 1... (LBA: 2133520 - 4267014)
I 09:49:27 Synchronising Cache...
I 09:49:31 Closing Track...
I 09:49:32 Finalising Disc...
I 09:49:52 Exporting Graph Data...
I 09:49:53 Graph Data File: C:\Users\Darth Vader\AppData\Roaming\ImgBurn\Graph Data Files\HP_DVD_Writer_1260v_AH24_24-NOVEMBER-2013_09-22_MBIPG101-R12-00_4x.ibg
I 09:49:53 Export Successfully Completed!
I 09:49:53 Operation Successfully Completed! - Duration: 00:27:14
I 09:49:53 Average Write Rate: 5,418 KB/s (3.9x) - Maximum Write Rate: 5,627 KB/s (4.1x)

 

 

 

[LIGHTNING UK!]

Why are you using such an old version?!

[darthpratham]

Had failed Burns in the new version so i thought i would give it a try in the older one.  I used the same setting with the new version too , it works fine.