Experencing Difficulty with Burning .ISO File; Fails to Verify

[The-Manbeast]

Hi, I'm trying to burn a 3.47 GB .iso file on a blank DVD+RW disc (Memorex, 4x, 4.7 GB). Before the burning can start, it says that it needs to be formatted. After the burning process is complete and the disc tray automatically opens on my Vista laptop, an error message appears after I have close the disc tray (with the DVD in it) that states: "Verify Failed! - Reason: Layouts do not match."
 

 

I have tried reducing the writing speed to 2.4x, did a full erase on it and re-installing the software, but nothing is working. Please tell me what I should do to fix this issue. Thanks!

 

Here is my log info:

I 10:55:02 ImgBurn Version 2.5.8.0 started!
I 10:55:03 Microsoft Windows Vista Home Premium Edition (6.0, Build 6002 : Service Pack 2)
I 10:55:03 Total Physical Memory: 2,086,596 KiB  -  Available: 568,348 KiB
I 10:55:03 Initialising SPTI...
I 10:55:03 Searching for SCSI / ATAPI devices...
I 10:55:06 -> Drive 1 - Info: Optiarc DVD RW AD-7560A DS06 (D:) (ATA)
I 10:55:06 Found 1 DVD±RW/RAM!
I 10:57:58 Operation Started!
I 10:57:58 Device: [0:0:0] Optiarc DVD RW AD-7560A DS06 (D:) (ATA)
I 10:57:58 Media Type: DVD+RW (Disc ID: INFODISC-A10-01)
I 10:57:58 Media Supported Write Speeds: 2.4x, 4x
I 10:57:58 Quick Erase: No
I 10:57:58 Format Properly: Yes
I 10:57:58 Format Size: Preferred
I 10:57:58 Erasing Disc...
I 11:14:44 Operation Successfully Completed! - Duration: 00:16:46
I 11:15:24 Operation Started!
I 11:15:24 Source File: C:\Users\C.J\Documents\Windows 7 Ultimate.iso
I 11:15:24 Source File Sectors: 1,825,216 (MODE1/2048)
I 11:15:24 Source File Size: 3,738,042,368 bytes
I 11:15:24 Source File Volume Identifier: Windows 7 Ultimate
I 11:15:24 Source File Volume Set Identifier: 43826C2A001BD9B4
I 11:15:24 Source File Application Identifier: ImgBurn v2.5.8.0
I 11:15:24 Source File Implementation Identifier: ImgBurn
I 11:15:24 Source File File System(s): UDF (1.02)
I 11:15:24 Destination Device: [0:0:0] Optiarc DVD RW AD-7560A DS06 (D:) (ATA)
I 11:15:24 Destination Media Type: DVD+RW (Disc ID: INFODISC-A10-01)
I 11:15:24 Destination Media Supported Write Speeds: 2.4x, 4x
I 11:15:24 Destination Media Sectors: 2,295,104
I 11:15:24 Write Mode: DVD
I 11:15:24 Write Type: DAO
I 11:15:24 Write Speed: 2.4x
I 11:15:24 Link Size: Auto
I 11:15:24 Lock Volume: Yes
I 11:15:24 Test Mode: No
I 11:15:24 OPC: No
I 11:15:24 BURN-Proof: Enabled
I 11:23:35 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x)
I 11:23:35 Book Type Setting: N/A (Reason: Invalid Command Operation Code)
I 11:23:36 Filling Buffer... (80 MiB)
I 11:23:38 Writing LeadIn...
I 11:23:41 Writing Session 1 of 1... (1 Track, LBA: 0 - 1825215)
I 11:23:41 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 1825215)
I 11:42:25 Synchronising Cache...
I 11:42:26 Closing Session...
I 11:42:28 Exporting Graph Data...
I 11:42:28 Graph Data File: C:\Users\C.J\AppData\Roaming\ImgBurn\Graph Data Files\Optiarc_DVD_RW_AD-7560A_DS06_TUESDAY-DECEMBER-03-2013_11-15_AM_INFODISC-A10-01_2.4x.ibg
I 11:42:28 Export Successfully Completed!
I 11:42:28 Operation Successfully Completed! - Duration: 00:27:03
I 11:42:28 Average Write Rate: 3,247 KiB/s (2.4x) - Maximum Write Rate: 3,280 KiB/s (2.4x)
I 11:42:28 Cycling Tray before Verify...
W 11:42:42 Waiting for device to become ready...
I 11:42:56 Device Ready!
E 11:42:56 CompareImageFileLayouts Failed! - Session Count Not Equal (1/0)
E 11:42:56 Verify Failed! - Reason: Layouts do not match.
 

Edited December 3, 2013 by The-Manbeast

[spinningwheel]

I 10:57:58 Media Type: DVD+RW (Disc ID: INFODISC-A10-01)

 

Read this, it applies to single layer as well as double layer media.

 

http://forum.imgburn.com/index.php?showtopic=8000