bergstenlind Posted March 17, 2014 Posted March 17, 2014 Hi! Need help to understand what it is that's going wrong. Here is a withdraw from the imgburn log: I 21:00:22 ImgBurn Version 2.5.7.0 started! I 21:00:22 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7601 : Service Pack 1) I 21:00:22 Total Physical Memory: 4 127 516 KB - Available: 1 247 496 KB I 21:00:22 Initialising SPTI... I 21:00:22 Searching for SCSI / ATAPI devices... I 21:00:32 -> Drive 1 - Info: TSSTcorp CDDVDW TS-L633C AC01 (D:) (ATAPI) I 21:00:32 Found 1 DVD±RW/RAM! W 21:02:14 User accepted disc space warning and is attempting to truncate! I 21:02:14 Operation Started! I 21:02:14 Source File: C:\Users\Simon\Desktop\Assassins.Creed.IV.Black.Flag.XBOX360-COMPLEX\DVD1\complex-ac4.bf.d1.dvd I 21:02:14 Source File Sectors: 4 267 015 (MODE1/2048) I 21:02:14 Source File Size: 8 738 846 720 bytes I 21:02:14 Source File Volume Identifier: DVD_ROM I 21:02:14 Source File Volume Set Identifier: 4930000 I 21:02:14 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 21:02:14 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 21:02:14 Source File File System(s): ISO9660; UDF (1.50) I 21:02:14 Destination Device: [0:1:0] TSSTcorp CDDVDW TS-L633C AC01 (D:) (ATAPI) I 21:02:14 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) I 21:02:14 Destination Media Supported Write Speeds: 3x; 4x; 6x I 21:02:14 Destination Media Sectors: 4 173 824 I 21:02:14 Write Mode: DVD I 21:02:14 Write Type: DAO I 21:02:14 Write Speed: 2,4x I 21:02:14 DVD+R DL Reserve Track: No I 21:02:14 Link Size: Auto I 21:02:14 Lock Volume: Yes I 21:02:14 Test Mode: No I 21:02:14 OPC: No I 21:02:14 BURN-Proof: Enabled W 21:02:16 Write Speed Miscompare! - Wanted: 3 324 KB/s (2,4x), Got: 4 155 KB/s (3x) W 21:02:16 The drive only supports writing these discs at 3x; 4x; 6x. I 21:02:16 Book Type Setting: DVD-ROM W 21:02:16 Optimal layer break position exceeds L0 capacity. W 21:02:16 Optimal L0 Sectors: 2 133 520 W 21:02:16 Maximum L0 Sectors: 2 086 912 I 21:02:16 Optimal L0 Data Zone Capacity: 2 133 520 I 21:02:16 Optimal L0 Data Zone Method: Copied From Original Disc W 21:02:16 Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in Parameter List I 21:02:20 Filling Buffer... (80 MB) I 21:02:25 Writing LeadIn... I 21:02:52 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 21:02:52 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 21:02:52 Writing Layer 0... (LBA: 0 - 2086911) I 21:19:56 Writing Layer 1... (LBA: 2086912 - 4267014) I 21:38:13 Synchronising Cache... I 21:38:40 Closing Track... I 21:38:41 Finalising Disc... I 21:39:42 Exporting Graph Data... I 21:39:43 Graph Data File: C:\Users\Simon\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_CDDVDW_TS-L633C_AC01_DEN-17-MARS-2014_21-02_MKM-003-00_2,4x.ibg I 21:39:43 Export Successfully Completed! I 21:39:43 Operation Successfully Completed! - Duration: 00:37:28 I 21:39:43 Average Write Rate: 3 937 KB/s (2.8x) - Maximum Write Rate: 4 235 KB/s (3.1x) I 21:39:43 Cycling Tray before Verify... W 21:39:59 Waiting for device to become ready... I 21:40:14 Device Ready! E 21:40:14 CompareImageFileLayouts Failed! - Session Count Not Equal (1/0) E 21:40:14 Verify Failed! - Reason: Layouts do not match.
LIGHTNING UK! Posted March 17, 2014 Posted March 17, 2014 It looks like your drive did a bad job of burning the disc. Have you tried burning at 4x or 6x rather than 3x? (Notice 2.4x isn't even an option for your drive/firmware/media combo) Put that disc back in the drive, load the program and put it back into 'Write' mode. Then copy + paste all of the disc info from the box on the right please.
RhoTrux64 Posted March 18, 2014 Posted March 18, 2014 No point trying to verify a truncated XGD3 image, cause the file layerbreak and the disk layerbreak won't match.
bergstenlind Posted March 18, 2014 Author Posted March 18, 2014 It looks like your drive did a bad job of burning the disc. Have you tried burning at 4x or 6x rather than 3x? (Notice 2.4x isn't even an option for your drive/firmware/media combo) Put that disc back in the drive, load the program and put it back into 'Write' mode. Then copy + paste all of the disc info from the box on the right please. Thanks for answering so quickly! All this is pretty new for me. TSSTcorp CDDVDW TS-L633C AC01 (ATAPI) Current Profile: DVD+R DL Disc Information: Status: Empty State of Last Session: Empty Erasable: No Free Sectors: 4 173 824 Free Space: 8 547 991 552 bytes Free Time: 927:32:74 (MM:SS:FF) Next Writable Address: 0 MID: MKM-003-00 Supported Write Speeds: 3x; 4x; 6x DVD±R DL Boundary Information: L0 Data Zone Capacity: 2 086 912 Changeable: Yes Physical Format Information (ADIP - L0): Disc ID: MKM-003-00 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196 608 Last Physical Sector of Data Area: 16 580 607 Last Physical Sector in Layer 0: 2 283 519 Physical Format Information (ADIP - L1): Disc ID: MKM-003-00 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196 608 Last Physical Sector of Data Area: 16 580 607 Last Physical Sector in Layer 0: 2 283 519 Physical Format Information (Last Recorded - L0): Disc ID: MKM-003-00 Book Type: DVD-ROM Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196 608 Last Physical Sector of Data Area: 16 580 607 Last Physical Sector in Layer 0: 2 283 519 Physical Format Information (Last Recorded - L1): Disc ID: MKM-003-00 Book Type: DVD-ROM Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196 608 Last Physical Sector of Data Area: 16 580 607 Last Physical Sector in Layer 0: 2 283 519 Performance (Write Speed): Descriptor 1... -> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00 -> EL: 4173823 (0x003FAFFF) -> RS: 11 080 KB/s (8x) - WS: 4 155 KB/s (3x) Descriptor 2... -> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00 -> EL: 4173823 (0x003FAFFF) -> RS: 11 080 KB/s (8x) - WS: 5 540 KB/s (4x) Descriptor 3... -> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00 -> EL: 4173823 (0x003FAFFF) -> RS: 11 080 KB/s (8x) - WS: 8 310 KB/s (6x)
LIGHTNING UK! Posted March 18, 2014 Posted March 18, 2014 Thanks, I just wanted to double check the drive still sees the disc (it supposedly burnt) as still being blank... and it does.
Recommended Posts