Lapitude Posted March 19, 2014 Posted March 19, 2014 I have been using Imgburn for years with no problem but I have been getting failure on DVD+R iso burn. It is XP iso and I have copied it before with no problem.Try as I might same problem each time. I updated the firmware, replaced the 80wire ATA cable and also removed the slave CD. I tested it on NeroDiscSpeed no error I 00:04:21 ImgBurn Version 2.5.8.0 started! I 00:04:21 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 00:04:21 Total Physical Memory: 2,095,856 KiB - Available: 1,629,664 KiB I 00:04:21 Initialising SPTI... I 00:04:21 Searching for SCSI / ATAPI devices... I 00:04:22 -> Drive 1 - Info: _NEC DVD_RW ND-1300A 1.0B (F:) (ATA) I 00:04:22 Found 1 DVD±RW! I 00:04:59 Operation Started! I 00:04:59 Source File: C:\Documents and Settings\Peter\My Documents\Software\OS\MS OS\XPNew\en_windows_xp_professional_with_service_pack_3_x86_cd_x14-80428.iso I 00:04:59 Source File Sectors: 301,639 (MODE1/2048) I 00:04:59 Source File Size: 617,756,672 bytes I 00:04:59 Source File Volume Identifier: GRTMPFPP_EN I 00:04:59 Source File Volume Set Identifier: GRTMPFPP_EN I 00:04:59 Source File Application Identifier: CDIMAGE 2.52 (03/09/2004 TM) I 00:04:59 Source File File System(s): ISO9660 (Bootable) I 00:04:59 Destination Device: [3:0:0] _NEC DVD_RW ND-1300A 1.0B (F:) (ATA) I 00:04:59 Destination Media Type: DVD+R I 00:04:59 Destination Media Supported Write Speeds: 2.3x, 4x I 00:04:59 Destination Media Sectors: 2,295,104 I 00:04:59 Write Mode: DVD I 00:04:59 Write Type: DAO I 00:04:59 Write Speed: 2x I 00:04:59 DVD+R Reserve Track: No I 00:04:59 Link Size: Auto I 00:04:59 Lock Volume: Yes I 00:04:59 Test Mode: No I 00:04:59 OPC: No I 00:04:59 BURN-Proof: Enabled I 00:04:59 Write Speed Successfully Set! - Effective: 2,822 KB/s (2x) I 00:04:59 Book Type Setting: N/A (Reason: Invalid Command Operation Code) I 00:05:00 Filling Buffer... (40 MiB) I 00:05:00 Writing LeadIn... I 00:05:25 Writing Session 1 of 1... (1 Track, LBA: 0 - 301638) I 00:05:25 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 301638) I 00:08:23 Synchronising Cache... I 00:08:25 Closing Track... I 00:08:31 Finalising Disc... I 00:09:06 Exporting Graph Data... I 00:09:06 Graph Data File: C:\Documents and Settings\Peter\Application Data\ImgBurn\Graph Data Files\_NEC_DVD_RW_ND-1300A_1.0B_19-MARCH-2014_00-04_N-A_2x.ibg I 00:09:06 Export Successfully Completed! I 00:09:06 Operation Successfully Completed! - Duration: 00:04:06 I 00:09:06 Average Write Rate: 3,389 KiB/s (2.5x) - Maximum Write Rate: 4,358 KiB/s (3.2x) I 00:09:06 Cycling Tray before Verify... W 00:09:13 Waiting for device to become ready... I 00:09:30 Device Ready! E 00:09:30 CompareImageFileLayouts Failed! - Session Count Not Equal (1/0) E 00:09:30 Verify Failed! - Reason: Layouts do not match. Here is the disc info _NEC DVD_RW ND-1300A 1.0B (ATA) Current Profile: DVD+R Disc Information: Status: Empty State of Last Session: Empty Erasable: No Free Sectors: 2,295,104 Free Space: 4,700,372,992 bytes Free Time: 510:03:29 (MM:SS:FF) Next Writable Address: 0 Supported Write Speeds: 2.3x, 4x Performance (Write Speed): Descriptor 1... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 2295104 (0x00230540) -> RS: 10,816 KB/s (8x) - WS: 3,245 KB/s (2.3x) Descriptor 2... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 2295104 (0x00230540) -> RS: 10,816 KB/s (8x) - WS: 5,408 KB/s (4x) I tried different media (maxell), reduced the write speed form AWS to 4x to 2x and also took the cover off and gently cleaned the lens with alcohol and a Q-Tip Is this a drive failure? It is a very old writer, suppose I better change to Win8 - but what I've seen of it really don't like the interface though (seems to be touch screen orientated) and I'm getting to that age where I don't like change - Bah Humbug!
Recommended Posts