Bongo Posted April 5, 2014 Posted April 5, 2014 Hello all! I'm using ImgBurn with a Nimbie 11 autoloader & anyDvd and it's working like a charm. The only issue I have is that at each disc change it spends a long time checking the read speed of the drive. At first i thought it was hanging, but when I lefit it alone after a few minutes it starts ripping to ISO w/out a problem. There are no errors in the log, and no other indications of somethign wrong. The ISO files are perfect. The only other time it acts like this is when I start a batch and it sits on waiting for the drive to be ready , which again takes some time but eventually it takes off. Is there a way for it to remember the drive speed so that it does not have to recheck every disc?
LIGHTNING UK! Posted April 5, 2014 Posted April 5, 2014 There isn't, no. That process should only take a fraction of a second or so. It would be useful if you could capture the I/O debug info of the bit that's taking a while so I can check the drive's responses. You can capture I/O debug info in the log by pressing the F8 key before making the drive do what it's taking a while to do.
Recommended Posts