Jump to content

Recommended Posts

Posted

Got my first BD-RE DL today.  I fully erased it and got 2 Warning notices in the log.  Thought I'd pass along the log and see if it's something that needs to be addressed:

 

 

I 17:06:04 ImgBurn Version 2.5.8.0 started!
I 17:06:04 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7601 : Service Pack 1)
I 17:06:04 Total Physical Memory: 8,370,632 KiB  -  Available: 5,838,284 KiB
I 17:06:04 Initialising SPTI...
I 17:06:04 -> Drive 5 - Info: PIONEER BD-RW   BDR-209M 1.10-ID60 (S:) (SATA)
I 17:07:07 Operation Started!
I 17:07:07 Device: [0:0:0] PIONEER BD-RW   BDR-209M 1.10 (S:) (SATA)
I 17:07:07 Media Type: BD-RE (Disc ID: VERBAT-IM1-000)
I 17:07:07 Media Supported Write Speeds: 2x
I 17:07:07 Quick Erase: No
I 17:07:07 Format Properly: Yes
I 17:07:07 Format Size: Preferred
I 17:07:07 Format With Full Certification: Yes
I 17:07:07 Format Without Spare Areas: Yes
I 17:07:07 Erasing Disc...
W 17:07:07 FormatDisc(FT: 0x31, FST: 0x02) Not Supported!
W 17:07:07 FormatDisc(FT: 0x31, FST: 0x03) Not Supported!

I 17:07:32 Operation Successfully Completed! - Duration: 00:00:24
I 17:07:32 Operation Started!
I 17:07:32 Device: [0:0:0] PIONEER BD-RW   BDR-209M 1.10 (S:) (SATA)
I 17:07:32 Media Type: BD-RE (Disc ID: VERBAT-IM1-000)
I 17:07:32 Media Supported Write Speeds: 2x
I 17:07:32 Media Sectors: 24,438,784
I 17:07:32 BD-RE FastWrite: No
I 17:07:32 Zeroing Sectors...
I 18:41:29 Synchronising Cache...
I 18:41:33 Operation Successfully Completed! - Duration: 01:33:57 - Total Duration: 01:34:22
I 18:41:33 Average Write Rate: 8,670 KiB/s (2.0x)

Posted

I assume it makes the drive verify the sectors on the disc and check they can be read (or perhaps written).

 

It's probably a variation of the drives auto verify when writing if spare areas are enabled.

 

It would probably have doubled the total time it took.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.