"Disc Not Empty" after Burning

[jamespev]

Afternoon everyone

 

I've been getting this problem on and off for the last few months when burning xbox 360 backups. After burning and verifying the disc fully and completing when I eject the game and insert another blank disc It just says "Disc not Empty" in the status bar and if I try to close down imgburn I get "Terminating Autoinsert thread" but that just stays there forever. I can either shut imgburn down from the task manager (but then when reopening it wont recognise any disc) or turn off the PC and restart then it will burn fine again and do it all again.

 

Any help please? I've tried uninstalling imgburn and reinstalling NG. My drive is a iHAS 624B and im using Verbatim MKM-003 (made in Singapore) discs like I always have.

My drive is setup Force HT - Yes

                            Online HT - Yes

                           Overspeed - No

                           Smartburn - Yes

 

I always burn the discs at 2.4x speed and clear the OPC first and have OPC enabled.

 

Ive attached a couple of screen shots too.

[jamespev]

Img log from the start of a burn

ImgBurn.log

[LIGHTNING UK!]

Maybe a controller / driver issue.

 

Right click the drive selection box and click 'family tree'.

 

Close the message box and then post the log containing that info please.

[jamespev]

here you go

ImgBurn.log

[LIGHTNING UK!]

I'm not seeing the family tree info in that log.

 

Just copy and paste from the log window once you've done what I said above.

[jamespev]

I 18:31:26 ImgBurn Version 2.5.8.0 started!
I 18:31:26 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7601 : Service Pack 1)
I 18:31:26 Total Physical Memory: 3,930,676 KiB  -  Available: 1,926,620 KiB
I 18:31:26 Initialising SPTI...
I 18:31:26 Searching for SCSI / ATAPI devices...
I 18:31:26 -> Drive 1 - Info: ATAPI iHAS624   B GL29 (E:) (SATA)
I 18:31:26 Found 1 DVD±RW/RAM!
I 18:31:49 Device: [4:0:0] ATAPI iHAS624   B GL29 (E:) (SATA)
I 18:31:49 Family Tree:
I 18:31:49 -> ACPI x64-based PC
I 18:31:49 -> Microsoft ACPI-Compliant System
I 18:31:49 -> PCI bus
I 18:31:49 -> Standard AHCI 1.0 Serial ATA Controller (VEN_10DE&DEV_0AD4 - NVIDIA - msahci - v6.1.7601.18231)
I 18:31:49 -> IDE Channel (ATA Channel 2)
I 18:31:49 -> CD-ROM Drive (ATAPI iHAS624   B ATA Device) (Channel 2, Target 0, Lun 0)
 

[LIGHTNING UK!]

Good old NVIDIA

 

If you can't get any driver updates from their website, try installing 'Virtual CloneDrive' from Elaborate Bytes / SlySoft and then switch the I/O Interface in ImgBurn's Settings (I/O tab) to 'ElbyCDIO'. That may get around whatever's messing up.

[judgedredd]

I've had the exact same behaviour in my system for some days now and i (falsely) blamed imgburn for some incompatibility with Intel's iaStorA v13 AHCI driver.

 

The problem was AVAST antivirus.

It seems it uses a deep scan (virtualization) technique which totally screws imgburn. I whitelisted "imgburn.exe" and it now works perfectly, as before.

 

 

Hope it helps somehow..