Wait Immediate I/O Deffered Error

[Catontheroof]

I was successful in burning an ISO file t disc so thougfht i would do another copy.

 

I tried several times - even put in a new disc, rebooting the pc but go the following message

 

 

ImgBurn Version 2.5.8.0 - Log
;   Monday, 02 June 2014, 22:50:14
; \\****************************************//
;
;
I 22:43:13 ImgBurn Version 2.5.8.0 started!
I 22:43:13 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3)
I 22:43:13 Total Physical Memory: 2,096,628 KiB  -  Available: 1,361,204 KiB
I 22:43:13 Initialising SPTI...
I 22:43:13 Searching for SCSI / ATAPI devices...
I 22:43:13 -> Drive 1 - Info: HL-DT-ST DVDRAM GSA-4163B A103-05 (D:) (ATA)
I 22:43:13 Found 1 DVD±RW/RAM!
I 22:46:24 Operation Started!
I 22:46:24 Device: [1:0:0] HL-DT-ST DVDRAM GSA-4163B A103 (D:) (ATA)
I 22:46:24 Media Type: DVD+RW (Disc ID: RITEK-004-48)
I 22:46:24 Media Supported Write Speeds: 2.4x, 4x
I 22:46:24 Quick Erase: No
I 22:46:24 Format Properly: Yes
I 22:46:24 Format Size: Preferred
I 22:46:24 Erasing Disc...
W 22:46:50 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/5) - Tracking Servo Failure
E 22:46:54 Failed to Erase Disc! - Reason: Tracking Servo Failure
E 22:46:54 Operation Failed! - Duration: 00:00:30
I 22:50:12 Close Request Acknowledged
I 22:50:13 Closing Down...
I 22:50:14 Shutting down SPTI...
I 22:50:14 ImgBurn closed!

  Any tips appreciated

Thanks

[LIGHTNING UK!]

Update the firmware on your drive.

 

http://www.firmwarehq.com/LG/GSA-4163B/files.html

 

If it still fails, use different discs.

[Catontheroof]

Thanks for the update

 

I have TDK discs and have been burning successfully until recently. As I said I successfully burned a tdk disc yesterday, but still getting this error now.

 

what discs would be good to try?

[LIGHTNING UK!]

Tdk is just the band name, your disks are Ritek - as shown by the 'Disc ID / MID'.

 

Do you have to use rewritables? If not, I'm sure you'll have more luck with some decent 'write once' discs.

[Catontheroof]

No I do not have to use RW discs - thanks - will switch and see how that goes

 

Thanks again

[Catontheroof]

Just an update

 

Bought R only discs and the programme worked just fine

 

Thanks

[LIGHTNING UK!]

You mean your *drive* worked just fine, it wasn't a program issue to begin with

[Catontheroof]

Thanks - yes my drive worked lol