Jump to content

Recommended Posts

Posted

Hi, my apologies if there is another thread that already has the solution to my problem.  Below, you can see the printscreen and the log from the project i was trying to complete.  As you can see, the error occured at 99% and continues to do so everytime i've tried.

 

This is my first time posting on a forum, please excuse me for not knowing how to proceed.  If there is anyone that can guide me through getting my issue(s) corrected, I would greatly appreciated.  I'm at my wits end, and before I go totally crazy, I thought i'd ask someone for help.

 

PLEASE HELP!!!!!!!!!

 

i'm not sure how i would receive the response, but if possible please contact by email if necessary (majmal26@yahoo.com)

 

Thanks in advance

 

AJ

 

ImgBurn LOG -

 

I 19:07:05 ImgBurn Version 2.5.8.0 started!
I 19:07:05 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7601 : Service Pack 1)
I 19:07:05 Total Physical Memory: 8,124,784 KiB  -  Available: 6,453,496 KiB
I 19:07:05 Initialising SPTI...
I 19:07:05 Searching for SCSI / ATAPI devices...
I 19:07:05 -> Drive 1 - Info: TSSTcorp DVD+-RW TS-D633A D200 (E:) (ATA)
I 19:07:05 -> Drive 2 - Info: HL-DT-ST DVDRAM GSA-H44L SB02-01 (F:) (USB 2.0)
I 19:07:05 Found 2 DVD±RW/RAMs!
I 19:09:49 Operation Started!
I 19:09:49 Source File: C:\Users\Shadywaize26\Desktop\Nissan Navigation System 2014 Map Update DVD version 7.9\Nissan Navigation System 2014 Map Update DVD version 7.9.mds
I 19:09:49 Source File Sectors: 3,982,208 (MODE1/2048)
I 19:09:49 Source File Size: 8,155,561,984 bytes
I 19:09:49 Source File Volume Set Identifier: 42ce24c3
I 19:09:49 Source File Implementation Identifier: SONY DISC TEC.
I 19:09:49 Source File File System(s): ISO9660, UDF (1.02)
I 19:09:49 Destination Device: [0:0:0] HL-DT-ST DVDRAM GSA-H44L SB02 (F:) (USB)
I 19:09:49 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66)
I 19:09:49 Destination Media Supported Write Speeds: 2.4x, 4x
I 19:09:49 Destination Media Sectors: 4,173,824
I 19:09:49 Destination Media L0 Data Zone Capacity: 2,086,912 (Changeable: Yes)
I 19:09:49 Write Mode: DVD
I 19:09:49 Write Type: DAO
I 19:09:49 Write Speed: MAX
I 19:09:49 DVD+R DL Reserve Track: No
I 19:09:49 Link Size: Auto
I 19:09:49 Lock Volume: Yes
I 19:09:49 Test Mode: No
I 19:09:49 OPC: No
I 19:09:49 BURN-Proof: Enabled
I 19:09:50 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)
I 19:09:50 Book Type Setting: DVD-ROM
I 19:09:50 Optimal L0 Data Zone Capacity: 1,991,104
I 19:09:50 Optimal L0 Data Zone Method: ECC Block Boundary
I 19:10:12 Set L0 Data Zone Capacity Succeeded!
I 19:10:12 L0 Data Zone Capacity - Effective: 1,991,104
I 19:10:13 Filling Buffer... (80 MiB)
I 19:10:14 Writing LeadIn...
I 19:10:15 Writing Session 1 of 1... (1 Track, LBA: 0 - 3982207)
I 19:10:15 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3982207)
I 19:10:15 Writing Layer 0... (LBA: 0 - 1991103)
I 19:30:40 Writing Layer 1... (LBA: 1991104 - 3982207)
W 19:52:29 Failed to read from file: Nissan Navigation System 2014 Map Update DVD version 7.9.iso
W 19:52:29 Reason: The request could not be performed because of an I/O device error.
W 19:57:56 Failed to read from file: Nissan Navigation System 2014 Map Update DVD version 7.9.iso
W 19:57:56 Reason: The request could not be performed because of an I/O device error.
 

 

 

 

 

 

 

Image to Dvd Error.doc

Posted

It looks like there's something wrong with your 'C:' drive. The file you're trying to burn is unreadable.

 

Run chkdsk on the drive and have it scan for bad sectors.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.