Tellurian Posted July 11, 2014 Posted July 11, 2014 I have found two seperate issues that confound me with the latest version of ImgBurn (2.5.8.0): 1.) Attempting to burn a very small ISO (Kon-Boot) fails every time; until you manually choose to burn with TAO instead of with SAO. I stumbled across this information while searching for a solution and after changing to TAO the 'Test' completed successfully. (I do not recall where I found this tip, but it was responded to by the developer stating that they would implement something to automatically change the SAO setting to TAO for burning very small images. 2009?) 2.) While preparing to post the ImgBurn log I found that it did not exist even though I had preferences set to create and append the existing log. I changed the location for the logs to a higher level and tried again. Selecting 'Append Existing' will write the log one time only. Sequential operations do not change the log from its original state. Selecting 'Overwrite Existing' actually appends the log. The following log was written with 'Overwrite' enabled. I 09:26:57 ImgBurn Version 2.5.8.0 started!I 09:26:57 Microsoft Windows 7 Professional x64 Edition (6.1, Build 7601 : Service Pack 1)I 09:26:57 Total Physical Memory: 33,495,708 KiB - Available: 29,842,276 KiBI 09:26:57 Initialising SPTI...I 09:26:57 Searching for SCSI / ATAPI devices...I 09:26:58 -> Drive 1 - Info: HL-DT-ST BD-RE BE12LU30 1.01-C0 (B:) (SATA)I 09:26:58 -> Drive 2 - Info: ELBY CLONEDRIVE 1.4 (I:) (SCSI)I 09:26:58 -> Drive 3 - Info: HL-DT-ST BD-RE WH14NS40 1.01-A1 (D:) (SATA)I 09:26:58 -> Drive 4 - Info: HL-DT-ST BD-RE WH14NS40 1.01-A1 (E:) (SATA)I 09:26:58 Found 1 BD-ROM/HD DVD-ROM, 1 BD-RE and 2 BD-RE XLs!I 09:27:18 Operation Started!I 09:27:18 Source File: H:\00-IDM\Windows PC Passwords - Bypass - Change - Find\(Bypass) Kon-Boot [Windows v2.4 & Mac v1.1](2014)\Kon-Boot 2.4 (Win XP-Win 8.1)\kon-bootCD\kon-bootCD.isoI 09:27:18 Source File Sectors: 35 (MODE1/2048)I 09:27:19 Source File Size: 71,680 bytesI 09:27:19 Source File File System(s): ISO9660 (Bootable)I 09:27:19 Destination Device: [2:0:0] HL-DT-ST BD-RE WH14NS40 1.01 (E:) (SATA)I 09:27:19 Destination Media Type: CD-R (Disc ID: 97m27s18f, Plasmon Data Systems)I 09:27:19 Destination Media Supported Write Speeds: 16x, 24x, 32x, 40x, 48xI 09:27:19 Destination Media Sectors: 359,847I 09:27:19 Write Mode: CDI 09:27:19 Write Type: SAOI 09:27:19 Write Speed: MAXI 09:27:19 Lock Volume: YesI 09:27:19 Test Mode: YesI 09:27:19 OPC: NoI 09:27:19 BURN-Proof: EnabledW 09:27:19 Write Speed Miscompare! - MODE SENSE: 8,468 KB/s (48x), GET PERFORMANCE: 8,534 KB/s (48.4x)I 09:27:19 Write Speed Successfully Set! - Effective: 8,468 KB/s (48x)E 09:27:19 Failed to send Cue Sheet!E 09:27:19 Reason: Invalid Field in CDBE 09:27:50 Operation Failed! - Duration: 00:00:28I 09:27:50 Average Write Rate: N/A - Maximum Write Rate: N/AI 09:29:44 Operation Started!I 09:29:44 Source File: H:\00-IDM\Windows PC Passwords - Bypass - Change - Find\(Bypass) Kon-Boot [Windows v2.4 & Mac v1.1](2014)\Kon-Boot 2.4 (Win XP-Win 8.1)\kon-bootCD\kon-bootCD.isoI 09:29:44 Source File Sectors: 35 (MODE1/2048)I 09:29:44 Source File Size: 71,680 bytesI 09:29:44 Source File File System(s): ISO9660 (Bootable)I 09:29:44 Destination Device: [2:0:0] HL-DT-ST BD-RE WH14NS40 1.01 (E:) (SATA)I 09:29:44 Destination Media Type: CD-R (Disc ID: 97m27s18f, Plasmon Data Systems)I 09:29:44 Destination Media Supported Write Speeds: 16x, 24x, 32x, 40x, 48xI 09:29:44 Destination Media Sectors: 359,847I 09:29:44 Write Mode: CDI 09:29:44 Write Type: TAOI 09:29:44 Write Speed: MAXI 09:29:44 Lock Volume: YesI 09:29:44 Test Mode: YesI 09:29:44 OPC: NoI 09:29:44 BURN-Proof: EnabledW 09:29:44 Write Speed Miscompare! - MODE SENSE: 8,468 KB/s (48x), GET PERFORMANCE: 8,575 KB/s (48.6x)I 09:29:44 Write Speed Successfully Set! - Effective: 8,468 KB/s (48x)I 09:29:44 Filling Buffer... (80 MiB)I 09:29:44 Writing LeadIn...I 09:29:44 Writing Session 1 of 1... (1 Track, LBA: 0 - 34)I 09:29:44 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 34)I 09:29:45 Synchronising Cache...I 09:29:51 Closing Track...I 09:29:52 Closing Session...I 09:30:11 Exporting Graph Data...I 09:30:11 Graph Data File: G:\Imgburn Temp\Graphs\HL-DT-ST_BD-RE_WH14NS40_1.01_FRIDAY-JULY-11-2014_9-29_AM_97m27s18f_MAX.ibgI 09:30:11 Export Successfully Completed!I 09:30:11 Operation Successfully Completed! - Duration: 00:00:22I 09:30:11 Average Write Rate: N/A - Maximum Write Rate: N/AI 09:33:37 Close Request AcknowledgedI 09:33:37 Closing Down...I 09:33:37 Shutting down SPTI...I 09:33:37 ImgBurn closed!
LIGHTNING UK! Posted July 11, 2014 Posted July 11, 2014 Most drives won't burn a track that's less than 150 sectors in SAO mode... yours rejects the CUE sheet being sent to it. Not sure what the issue is with the Log file, it works ok here. The program only writes to the file when it's being closed down - it doesn't do it as it goes (just so you know).
Tellurian Posted July 11, 2014 Author Posted July 11, 2014 Is it alright to leave ImgBurn in TAO mode? And, thank you for clarify how the log file writes. I had assumed that it wrote as it progressed because it can be read as it progresses.
LIGHTNING UK! Posted July 12, 2014 Posted July 12, 2014 I wouldn't... revert it to SAO. It's much better.
Recommended Posts