Need help with error at 91 percent burning xbox 360 backups

[themastablasta]

Can someone help me please with an error that occurs when i try to burn xgd3 backups??

is it a driver error?

 

I 17:30:30 ImgBurn Version 2.5.8.0 started!

I 17:30:30 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1)

I 17:30:30 Total Physical Memory: 2.095.608 KiB  -  Available: 627.784 KiB

I 17:30:30 Initialising SPTI...

I 17:30:30 Searching for SCSI / ATAPI devices...

I 17:30:32 -> Drive 1 - Info: TSSTcorp CDDVDW SH-S202N SB02 (E:) (ATA)

I 17:30:32 -> Drive 2 - Info: MagicISO Virtual DVD-ROM 1.0A (G:) (Unknown)

I 17:30:32 Found 1 DVD-ROM and 1 DVD±RW/RAM!

I 18:24:40 Operation Started!

I 18:24:40 Source File: D:\X360\GRID.Autosport.360.dvd

I 18:24:40 Source File Sectors: 4.267.015 (MODE1/2048)

I 18:24:40 Source File Size: 8.738.846.720 bytes

I 18:24:40 Source File Volume Identifier: DVD_ROM

I 18:24:40 Source File Volume Set Identifier: ef15c000MS UDFBridge

I 18:24:40 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 18:24:40 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 18:24:40 Source File File System(s): ISO9660; UDF (1.50)

I 18:24:40 Destination Device: [0:1:0] TSSTcorp CDDVDW SH-S202N SB02 (E:) (ATA)

I 18:24:40 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00)

I 18:24:40 Destination Media Supported Write Speeds: 4x; 6x; 8x; 10x

I 18:24:40 Destination Media Sectors: 4.267.040

I 18:24:40 Destination Media L0 Data Zone Capacity: 2.133.520 (Changeable: Yes)

I 18:24:40 Write Mode: DVD

I 18:24:41 Write Type: DAO

I 18:24:41 Write Speed: 4x

I 18:24:41 DVD+R DL Reserve Track: No

I 18:24:41 Link Size: Auto

I 18:24:41 Lock Volume: Yes

I 18:24:41 Test Mode: No

I 18:24:41 OPC: Yes

I 18:24:41 BURN-Proof: Disabled

I 18:24:42 Write Speed Successfully Set! - Effective: 5.540 KB/s (4x)

I 18:24:42 Book Type Setting: DVD-ROM

I 18:25:14 Optimal L0 Data Zone Capacity: 2.133.520

I 18:25:14 Optimal L0 Data Zone Method: Copied From Original Disc

I 18:25:26 Set L0 Data Zone Capacity Succeeded!

I 18:25:26 L0 Data Zone Capacity - Effective: 2.133.520

I 18:25:28 Filling Buffer... (80 MiB)

I 18:25:29 Writing LeadIn...

I 18:25:53 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014)

I 18:25:53 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)

I 18:25:53 Writing Layer 0... (LBA: 0 - 2133519)

W 18:34:11 Failed to Write Sectors 1340128 - 1340159 - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32)

W 18:34:11 Retrying (1 of 20)...

W 18:34:15 Retry Failed - Reason: Invalid Address For Write

W 18:34:15 Potential Bogus Driver Error Detected!

W 18:34:15 Retrying (2 of 20)...

I 18:34:15 Writing Sectors...

I 18:39:15 Writing Layer 1... (LBA: 2133520 - 4267014)

W 18:42:18 Failed to Write Sectors 2617872 - 2617903 - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32)

W 18:42:18 Retrying (1 of 20)...

W 18:42:22 Retry Failed - Reason: Invalid Address For Write

W 18:42:22 Potential Bogus Driver Error Detected!

W 18:42:22 Retrying (2 of 20)...

I 18:42:22 Writing Sectors...

W 18:50:22 Failed to Write Sectors 3904240 - 3904271 - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32)

W 18:50:22 Retrying (1 of 20)...

W 18:50:24 Retry Failed - Reason: Invalid Address For Write

W 18:50:24 Retrying (2 of 20)...

W 18:50:24 Retry Failed - Reason: Invalid Address For Write

W 18:50:24 Retrying (3 of 20)...

W 18:50:24 Retry Failed - Reason: Invalid Address For Write

E 18:52:01 Failed to Write Sectors 3904240 - 3904271 - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32)

E 18:52:01 Next Writable Address: 3904256

 

 

[Adrianvdh]

Did you try to 'Send BurnerMax Payload' to your drive?

 

Tools -> Drive -> Send BurnerMax Payload

[LIGHTNING UK!]

I doubt your drive is capable of overburning DVD+R DL properly, but in any case, you need to fix your DMA issues first... try another SATA cable.

[themastablasta]

I doubt your drive is capable of overburning DVD+R DL properly, but in any case, you need to fix your DMA issues first... try another SATA cable.

Its a IDE drive and I did change cable to the shortest earlier. Enabled DMA in all controllers as well and according to the supported drive list for Burnermax mine is suitable. But oh well ive already wasted 6 verbatims guess i need to go out and buy myself an ihas drive which i have not a single clue for where to buy in a country like germany..